[PATCH 2/4] dts: imx: Add fixed-link property to HSC and DDC (imx53) devices

[sbabic at denx.de]

> Those two boards are supposed to be run with a single u-boot binary.
> There are notable differences though - HSC uses DSA switch (which
> phy_id == 0x0) and DCC (DP83848C).
> After the commit 3bf135b6c367
> ("drivers: net: phy: Ignore PHY ID 0 during PHY probing") the PHY devices
> with phy_id == 0 are not created in U-Boot anymore. This caused regression
> on HSC.
> To fix this problem - the fec's 'fixed-link' node has been introduced and
> the phy_id is not assessed anymore. This approach works on both boards.
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================