[PATCH u-boot-marvell 05/11] usb: ehci-marvell: call generic-phy initialization
Marek Behún
marek.behun at nic.cz
Sun Apr 19 17:48:44 CEST 2020
Use the new usb_phys_setup and usb_phys_shutdown to initialize
potential generic-phys in the ehci-marvell driver.
Signed-off-by: Marek Behún <marek.behun at nic.cz>
---
drivers/usb/host/ehci-marvell.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index 8efe6b63b9..cee3896ba8 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -19,6 +19,8 @@
#include <asm/arch/orion5x.h>
#endif
+#include "phy.h"
+
DECLARE_GLOBAL_DATA_PTR;
#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
@@ -103,6 +105,7 @@ static int ehci_mvebu_probe(struct udevice *dev)
struct ehci_mvebu_priv *priv = dev_get_priv(dev);
struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
+ int err;
/*
* Get the base address for EHCI controller from the device node
@@ -125,6 +128,10 @@ static int ehci_mvebu_probe(struct udevice *dev)
else
usb_brg_adrdec_setup((void *)priv->hcd_base);
+ err = usb_phys_setup(dev);
+ if (err)
+ return err;
+
hccr = (struct ehci_hccr *)(priv->hcd_base + 0x100);
hcor = (struct ehci_hcor *)
((uintptr_t)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
@@ -133,8 +140,28 @@ static int ehci_mvebu_probe(struct udevice *dev)
(uintptr_t)hccr, (uintptr_t)hcor,
(uintptr_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
- return ehci_register(dev, hccr, hcor, &marvell_ehci_ops, 0,
- USB_INIT_HOST);
+ err = ehci_register(dev, hccr, hcor, &marvell_ehci_ops, 0,
+ USB_INIT_HOST);
+ if (err)
+ goto phy_err;
+
+ return 0;
+
+phy_err:
+ usb_phys_shutdown(dev);
+
+ return err;
+}
+
+static int ehci_mvebu_remove(struct udevice *dev)
+{
+ int ret;
+
+ ret = ehci_deregister(dev);
+ if (ret)
+ return ret;
+
+ return usb_phys_shutdown(dev);
}
static const struct udevice_id ehci_usb_ids[] = {
@@ -148,7 +175,7 @@ U_BOOT_DRIVER(ehci_mvebu) = {
.id = UCLASS_USB,
.of_match = ehci_usb_ids,
.probe = ehci_mvebu_probe,
- .remove = ehci_deregister,
+ .remove = ehci_mvebu_remove,
.ops = &ehci_usb_ops,
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
.priv_auto_alloc_size = sizeof(struct ehci_mvebu_priv),
--
2.24.1
More information about the U-Boot
mailing list