Enable USB host controller on Odroid-C2

[Beniamino Galvani]

On Fri, Mar 27, 2020 at 02:35:50PM +0100, Neil Armstrong wrote:
> Hi,
> 
> On 18/08/2019 15:42, Beniamino Galvani wrote:
> > Hi,
> > 
> > these two patches enable the USB host controller on Odroid-C2. The
> > first patch adds a PHY driver; the second one enables the necessary
> > configuration options and updates the device tree.
> > 
> > Note that the DWC2 driver currently does not support enabling PHYs
> > from the device tree and so the following series (still on review) is
> > needed as runtime requirement for the second patch:
> > 
> >  [PATCH 0/5] usb: host: dwc2: use driver model for PHY and CLOCK
> > 
> > Thanks,
> > Beniamino
> > 
> > Beniamino Galvani (2):
> >   phy: meson: add GXBB PHY driver
> >   odroid-c2: enable USB host controller
> > 
> >  arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi |   8 +
> >  configs/odroid-c2_defconfig                  |   7 +
> >  drivers/phy/Kconfig                          |   8 +
> >  drivers/phy/Makefile                         |   1 +
> >  drivers/phy/meson-gxbb-usb2.c                | 235 +++++++++++++++++++
> >  include/configs/meson64.h                    |   5 +
> >  6 files changed, 264 insertions(+)
> >  create mode 100644 drivers/phy/meson-gxbb-usb2.c
> > 
> 
> Could you re-test with v6 of DWC2 patchset at http://patchwork.ozlabs.org/project/uboot/list/?series=163388 ?

Hi,

I tested my two patches on top of Patrick's v6 and they still work as
expected.

Thanks,
Beniamino