[PATCH v6 08/14] phy: phy-mtk-tphy: add support new version
Chunfeng Yun
chunfeng.yun at mediatek.com
Mon Apr 20 05:21:17 CEST 2020
The new version removes all shared banks between multi-phys
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
Reviewed-by: Weijie Gao <weijie.gao at mediatek.com>
---
v6: add Reviewed-by Weijie
v2~v5: no changes
---
drivers/phy/phy-mtk-tphy.c | 68 +++++++++++++++++++++++++++++++++++---
1 file changed, 63 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/phy-mtk-tphy.c b/drivers/phy/phy-mtk-tphy.c
index 71bc706c6e..20167fe7cb 100644
--- a/drivers/phy/phy-mtk-tphy.c
+++ b/drivers/phy/phy-mtk-tphy.c
@@ -28,6 +28,17 @@
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
#define SSUSB_SIFSLV_V1_U3PHYA 0x200
+/* version V2 sub-banks offset base address */
+/* u2 phy banks */
+#define SSUSB_SIFSLV_V2_MISC 0x000
+#define SSUSB_SIFSLV_V2_U2FREQ 0x100
+#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V2_SPLLC 0x000
+#define SSUSB_SIFSLV_V2_CHIP 0x100
+#define SSUSB_SIFSLV_V2_U3PHYD 0x200
+#define SSUSB_SIFSLV_V2_U3PHYA 0x400
+
#define U3P_USBPHYACR0 0x000
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
#define PA0_RG_USB20_INTR_EN BIT(5)
@@ -162,6 +173,11 @@
#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
+enum mtk_phy_version {
+ MTK_TPHY_V1 = 1,
+ MTK_TPHY_V2,
+};
+
struct u2phy_banks {
void __iomem *misc;
void __iomem *fmreg;
@@ -192,6 +208,7 @@ struct mtk_phy_instance {
struct mtk_tphy {
struct udevice *dev;
void __iomem *sif_base;
+ enum mtk_phy_version version;
struct mtk_phy_instance **phys;
int nphys;
};
@@ -304,6 +321,9 @@ static void pcie_phy_instance_init(struct mtk_tphy *tphy,
{
struct u3phy_banks *u3_banks = &instance->u3_banks;
+ if (tphy->version != MTK_TPHY_V1)
+ return;
+
clrsetbits_le32(u3_banks->phya + U3P_U3_PHYA_DA_REG0,
P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
P3A_RG_XTAL_EXT_PE1H_VAL(0x2) |
@@ -398,6 +418,31 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy,
}
}
+static void phy_v2_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+ u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+ u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
static int mtk_phy_init(struct phy *phy)
{
struct mtk_tphy *tphy = dev_get_priv(phy->dev);
@@ -500,7 +545,14 @@ static int mtk_phy_xlate(struct phy *phy,
return -EINVAL;
}
- phy_v1_banks_init(tphy, instance);
+ if (tphy->version == MTK_TPHY_V1) {
+ phy_v1_banks_init(tphy, instance);
+ } else if (tphy->version == MTK_TPHY_V2) {
+ phy_v2_banks_init(tphy, instance);
+ } else {
+ dev_err(phy->dev, "phy version is not supported\n");
+ return -EINVAL;
+ }
return 0;
}
@@ -527,9 +579,14 @@ static int mtk_tphy_probe(struct udevice *dev)
return -ENOMEM;
tphy->dev = dev;
- tphy->sif_base = dev_read_addr_ptr(dev);
- if (!tphy->sif_base)
- return -ENOENT;
+ tphy->version = dev_get_driver_data(dev);
+
+ /* v1 has shared banks */
+ if (tphy->version == MTK_TPHY_V1) {
+ tphy->sif_base = dev_read_addr_ptr(dev);
+ if (!tphy->sif_base)
+ return -ENOENT;
+ }
dev_for_each_subnode(subnode, dev) {
struct mtk_phy_instance *instance;
@@ -560,7 +617,8 @@ static int mtk_tphy_probe(struct udevice *dev)
}
static const struct udevice_id mtk_tphy_id_table[] = {
- { .compatible = "mediatek,generic-tphy-v1", },
+ { .compatible = "mediatek,generic-tphy-v1", .data = MTK_TPHY_V1, },
+ { .compatible = "mediatek,generic-tphy-v2", .data = MTK_TPHY_V2, },
{ }
};
--
2.25.1
More information about the U-Boot
mailing list