[PATCH v3 1/3] spi: sifive: Fix QPP transfer

Jagan Teki jagan at amarulasolutions.com
Mon Apr 20 14:52:36 CEST 2020


For historical reasons the existing logic of filling tx fifo
with data, rx fifo with NULL for tx transfer and filling rx
fifo with data, tx fifo with NULL for rx transfer is not
clear enough to support the Quad Page Program.
   
SiFive SPI controllers have specific sets of watermark
registers and SPI I/O directions bits in order to program
SPI controllers clear enough to support all sets of operating
modes.
   
Here is the exact programing sequence that would follow on this
patch and tested via SPI-NOR and MMC_SPI.
   
- set the frame format proto, endian
- set the frame format dir, set it for tx and clear it for rx
- TX transfer:
  fill tx fifo with data.
  wait for TX watermark bit to clear.
- TX transfer:
  fill tx fifo with 0xff.
  write nbytes to rx watermark register
  wait for rx watermark bit to clear.
  read the rx fifo data.

So, this patch adopts this program sequence and fixes the existing
I/O direction bit.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v3:
- new patch

 drivers/spi/spi-sifive.c | 57 ++++++++++++++++++++++++++--------------
 1 file changed, 37 insertions(+), 20 deletions(-)

diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index 336b683476..2a0b28dc08 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -10,6 +10,7 @@
 #include <dm.h>
 #include <malloc.h>
 #include <spi.h>
+#include <wait_bit.h>
 #include <asm/io.h>
 #include <linux/log2.h>
 #include <clk.h>
@@ -127,8 +128,8 @@ static void sifive_spi_clear_cs(struct sifive_spi *spi)
 }
 
 static void sifive_spi_prep_transfer(struct sifive_spi *spi,
-				     bool is_rx_xfer,
-				     struct dm_spi_slave_platdata *slave_plat)
+				     struct dm_spi_slave_platdata *slave_plat,
+				     u8 *rx_ptr)
 {
 	u32 cr;
 
@@ -160,7 +161,7 @@ static void sifive_spi_prep_transfer(struct sifive_spi *spi,
 
 	/* SPI direction in/out ? */
 	cr &= ~SIFIVE_SPI_FMT_DIR;
-	if (!is_rx_xfer)
+	if (!rx_ptr)
 		cr |= SIFIVE_SPI_FMT_DIR;
 
 	writel(cr, spi->regs + SIFIVE_SPI_REG_FMT);
@@ -191,13 +192,19 @@ static void sifive_spi_tx(struct sifive_spi *spi, const u8 *tx_ptr)
 	writel(tx_data, spi->regs + SIFIVE_SPI_REG_TXDATA);
 }
 
+static int sifive_spi_wait(struct sifive_spi *spi, u32 bit)
+{
+	return wait_for_bit_le32(spi->regs + SIFIVE_SPI_REG_IP,
+				 bit, true, 100, false);
+}
+
 static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen,
 			   const void *dout, void *din, unsigned long flags)
 {
 	struct udevice *bus = dev->parent;
 	struct sifive_spi *spi = dev_get_priv(bus);
 	struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
-	const unsigned char *tx_ptr = dout;
+	const u8 *tx_ptr = dout;
 	u8 *rx_ptr = din;
 	u32 remaining_len;
 	int ret;
@@ -210,31 +217,37 @@ static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen,
 			return ret;
 	}
 
-	sifive_spi_prep_transfer(spi, true, slave_plat);
+	sifive_spi_prep_transfer(spi, slave_plat, rx_ptr);
 
 	remaining_len = bitlen / 8;
 
 	while (remaining_len) {
-		int n_words, tx_words, rx_words;
-
-		n_words = min(remaining_len, spi->fifo_depth);
+		unsigned int n_words = min(remaining_len, spi->fifo_depth);
+		unsigned int tx_words, rx_words;
 
 		/* Enqueue n_words for transmission */
-		if (tx_ptr) {
-			for (tx_words = 0; tx_words < n_words; ++tx_words) {
-				sifive_spi_tx(spi, tx_ptr);
-				sifive_spi_rx(spi, NULL);
-				tx_ptr++;
-			}
+		for (tx_words = 0; tx_words < n_words; tx_words++) {
+			if (!tx_ptr)
+				sifive_spi_tx(spi, NULL);
+			else
+				sifive_spi_tx(spi, tx_ptr++);
 		}
 
-		/* Read out all the data from the RX FIFO */
 		if (rx_ptr) {
-			for (rx_words = 0; rx_words < n_words; ++rx_words) {
-				sifive_spi_tx(spi, NULL);
-				sifive_spi_rx(spi, rx_ptr);
-				rx_ptr++;
-			}
+			/* Wait for transmission + reception to complete */
+			writel(n_words - 1, spi->regs + SIFIVE_SPI_REG_RXMARK);
+			ret = sifive_spi_wait(spi, SIFIVE_SPI_IP_RXWM);
+			if (ret)
+				return ret;
+
+			/* Read out all the data from the RX FIFO */
+			for (rx_words = 0; rx_words < n_words; rx_words++)
+				sifive_spi_rx(spi, rx_ptr++);
+		} else {
+			/* Wait for transmission to complete */
+			ret = sifive_spi_wait(spi, SIFIVE_SPI_IP_TXWM);
+			if (ret)
+				return ret;
 		}
 
 		remaining_len -= n_words;
@@ -314,6 +327,10 @@ static void sifive_spi_init_hw(struct sifive_spi *spi)
 	/* Watermark interrupts are disabled by default */
 	writel(0, spi->regs + SIFIVE_SPI_REG_IE);
 
+	/* Default watermark FIFO threshold values */
+	writel(1, spi->regs + SIFIVE_SPI_REG_TXMARK);
+	writel(0, spi->regs + SIFIVE_SPI_REG_RXMARK);
+
 	/* Set CS/SCK Delays and Inactive Time to defaults */
 	writel(SIFIVE_SPI_DELAY0_CSSCK(1) | SIFIVE_SPI_DELAY0_SCKCS(1),
 	       spi->regs + SIFIVE_SPI_REG_DELAY0);
-- 
2.17.1



More information about the U-Boot mailing list