[PATCH 5/5] configs: khadas-vim3: enable support for SPI NOR flash

[Neil Armstrong]

Enable the necessary configs to make usage of the SPI NOR Flash.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 configs/khadas-vim3_defconfig  | 9 +++++++++
 configs/khadas-vim3l_defconfig | 9 +++++++++
 2 files changed, 18 insertions(+)

diff --git a/configs/khadas-vim3_defconfig b/configs/khadas-vim3_defconfig
index 72987d9523..692138eb11 100644
--- a/configs/khadas-vim3_defconfig
+++ b/configs/khadas-vim3_defconfig
@@ -18,6 +18,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
@@ -28,6 +30,10 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
@@ -41,6 +47,9 @@ CONFIG_DEBUG_UART_MESON=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MESON_SPIFC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
diff --git a/configs/khadas-vim3l_defconfig b/configs/khadas-vim3l_defconfig
index 7e2ad41bca..28c20c0d6d 100644
--- a/configs/khadas-vim3l_defconfig
+++ b/configs/khadas-vim3l_defconfig
@@ -18,6 +18,8 @@ CONFIG_MISC_INIT_R=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_SETEXPR is not set
@@ -28,6 +30,10 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_MESON_GX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_REALTEK=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
@@ -43,6 +49,9 @@ CONFIG_DEBUG_UART_MESON=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MESON_SPIFC=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
-- 
2.22.0