[PATCH 17/26 v7] spl: Extract legacy image handling into separate file

[Stefan Roese]

This patch moves the legacy image handling into a separate file, which
will be extended with other legacy image features later.

No function change intended.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
Cc: Weijie Gao <weijie.gao at mediatek.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
---
Changes in v7:
- None

Changes in v6:
- New patch

 common/spl/Makefile     |  1 +
 common/spl/spl.c        | 56 +++++++++--------------------------------
 common/spl/spl_legacy.c | 54 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 67 insertions(+), 44 deletions(-)
 create mode 100644 common/spl/spl_legacy.c

diff --git a/common/spl/Makefile b/common/spl/Makefile
index eaa57f5ce5..c576a78126 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -10,6 +10,7 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
 obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
 obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
+obj-$(CONFIG_$(SPL_TPL_)LEGACY_IMAGE_SUPPORT) += spl_legacy.o
 obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
 obj-$(CONFIG_$(SPL_TPL_)XIP_SUPPORT) += spl_xip.o
 obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += spl_ymodem.o
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 932e6ab98a..b0f0e1557b 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -254,6 +254,14 @@ static int spl_load_fit_image(struct spl_image_info *spl_image,
 }
 #endif
 
+__weak int spl_parse_legacy_header(struct spl_image_info *spl_image,
+				   const struct image_header *header)
+{
+	/* LEGACY image not supported */
+	debug("Legacy boot image support not enabled, proceeding to other boot methods\n");
+	return -EINVAL;
+}
+
 int spl_parse_image_header(struct spl_image_info *spl_image,
 			   const struct image_header *header)
 {
@@ -264,51 +272,11 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
 		return ret;
 #endif
 	if (image_get_magic(header) == IH_MAGIC) {
-#ifdef CONFIG_SPL_LEGACY_IMAGE_SUPPORT
-		u32 header_size = sizeof(struct image_header);
-
-#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
-		/* check uImage header CRC */
-		if (!image_check_hcrc(header)) {
-			puts("SPL: Image header CRC check failed!\n");
-			return -EINVAL;
-		}
-#endif
-
-		if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) {
-			/*
-			 * On some system (e.g. powerpc), the load-address and
-			 * entry-point is located at address 0. We can't load
-			 * to 0-0x40. So skip header in this case.
-			 */
-			spl_image->load_addr = image_get_load(header);
-			spl_image->entry_point = image_get_ep(header);
-			spl_image->size = image_get_data_size(header);
-		} else {
-			spl_image->entry_point = image_get_ep(header);
-			/* Load including the header */
-			spl_image->load_addr = image_get_load(header) -
-				header_size;
-			spl_image->size = image_get_data_size(header) +
-				header_size;
-		}
-#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
-		/* store uImage data length and CRC to check later */
-		spl_image->dcrc_data = image_get_load(header);
-		spl_image->dcrc_length = image_get_data_size(header);
-		spl_image->dcrc = image_get_dcrc(header);
-#endif
+		int ret;
 
-		spl_image->os = image_get_os(header);
-		spl_image->name = image_get_name(header);
-		debug(SPL_TPL_PROMPT
-		      "payload image: %32s load addr: 0x%lx size: %d\n",
-		      spl_image->name, spl_image->load_addr, spl_image->size);
-#else
-		/* LEGACY image not supported */
-		debug("Legacy boot image support not enabled, proceeding to other boot methods\n");
-		return -EINVAL;
-#endif
+		ret = spl_parse_legacy_header(spl_image, header);
+		if (ret)
+			return ret;
 	} else {
 #ifdef CONFIG_SPL_PANIC_ON_RAW_IMAGE
 		/*
diff --git a/common/spl/spl_legacy.c b/common/spl/spl_legacy.c
new file mode 100644
index 0000000000..33f3587e3b
--- /dev/null
+++ b/common/spl/spl_legacy.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Stefan Roese <sr at denx.de>
+ */
+
+#include <common.h>
+#include <spl.h>
+
+int spl_parse_legacy_header(struct spl_image_info *spl_image,
+			    const struct image_header *header)
+{
+	u32 header_size = sizeof(struct image_header);
+
+#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
+	/* check uImage header CRC */
+	if (!image_check_hcrc(header)) {
+		puts("SPL: Image header CRC check failed!\n");
+		return -EINVAL;
+	}
+#endif
+
+	if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY) {
+		/*
+		 * On some system (e.g. powerpc), the load-address and
+		 * entry-point is located at address 0. We can't load
+		 * to 0-0x40. So skip header in this case.
+		 */
+		spl_image->load_addr = image_get_load(header);
+		spl_image->entry_point = image_get_ep(header);
+		spl_image->size = image_get_data_size(header);
+	} else {
+		spl_image->entry_point = image_get_ep(header);
+		/* Load including the header */
+		spl_image->load_addr = image_get_load(header) -
+			header_size;
+		spl_image->size = image_get_data_size(header) +
+			header_size;
+	}
+
+#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
+	/* store uImage data length and CRC to check later */
+	spl_image->dcrc_data = image_get_load(header);
+	spl_image->dcrc_length = image_get_data_size(header);
+	spl_image->dcrc = image_get_dcrc(header);
+#endif
+
+	spl_image->os = image_get_os(header);
+	spl_image->name = image_get_name(header);
+	debug(SPL_TPL_PROMPT
+	      "payload image: %32s load addr: 0x%lx size: %d\n",
+	      spl_image->name, spl_image->load_addr, spl_image->size);
+
+	return 0;
+}
-- 
2.26.2