[PATCH 0/9] stm32mp1: use OPP information for PLL1 settings in SPL

[Patrick Delaunay]

This serie allows to switch the CPU frequency to the max frequency
supported in OPP device tree nodes and supported by STM32MP SOC
(800MHz is supported by STM32MP15xD and STM32MP15xF).

Board also increases the VDDCore voltage to support this new
operation point.



Marek Vasut (1):
  ARM: stm32: Add board_early_init_f() to SPL

Patrick Delaunay (8):
  arm: stm32mp: spl: add bsec driver in SPL
  ARM: dts: stm32: add cpufreq support on stm32mp15x
  board: st: create common file stpmic1.c
  stm32mp1: clk: configure pll1 with OPP
  arm: stm32mp: add weak function to save vddcore
  board: st: stpmic1: add function stmpic_buck1_set
  board: stm32mp1: update vddcore in SPL
  ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL

 arch/arm/dts/stm32mp15-u-boot.dtsi            |  12 +-
 arch/arm/dts/stm32mp151.dtsi                  |  21 ++
 arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi      |   9 -
 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi      |   9 -
 arch/arm/dts/stm32mp157c-ed1.dts              |   8 +
 arch/arm/dts/stm32mp15xx-dkx.dtsi             |   8 +
 arch/arm/mach-stm32mp/Makefile                |   2 +-
 arch/arm/mach-stm32mp/bsec.c                  |  11 +-
 .../arm/mach-stm32mp/include/mach/sys_proto.h |   3 +
 arch/arm/mach-stm32mp/spl.c                   |  11 +
 board/dhelectronics/dh_stm32mp1/Makefile      |   2 +-
 board/st/common/Makefile                      |   1 +
 board/st/common/stpmic1.c                     | 186 +++++++++++
 board/st/common/stpmic1.h                     |   6 +
 board/st/stm32mp1/board.c                     | 158 ----------
 board/st/stm32mp1/spl.c                       |  20 ++
 .../clock/st,stm32mp1.txt                     |   4 +
 drivers/clk/clk_stm32mp1.c                    | 295 ++++++++++++++++--
 18 files changed, 554 insertions(+), 212 deletions(-)
 create mode 100644 board/st/common/stpmic1.c
 create mode 100644 board/st/common/stpmic1.h

-- 
2.17.1