[RFC PATCH 9/9] config: Enable support for the XHCI controller on RPI4 board
Nicolas Saenz Julienne
nsaenzjulienne at suse.de
Wed Apr 22 12:44:34 CEST 2020
On Tue, 2020-04-21 at 18:50 +0200, Sylwester Nawrocki wrote:
> From: Marek Szyprowski <m.szyprowski at samsung.com>
>
> This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI
> and USB commands. To get it working one has to call the following commands:
> "pci enum; usb start;", thus such commands have been added to the default
> "preboot" environment variable. One has to update his environment if it is
> already configured to get this feature working out of the box.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
Would you mind enabling USB keyboard support too? It's useful for people using
u-boot/UEFI.
If not I don't mind sending a separate patch.
Regards,
Nicolas
> configs/rpi_4_32b_defconfig | 9 +++++++++
> configs/rpi_4_defconfig | 10 ++++++++++
> configs/rpi_arm64_defconfig | 9 ++++++++-
> 3 files changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig
> index 72cda5d..0dd763f 100644
> --- a/configs/rpi_4_32b_defconfig
> +++ b/configs/rpi_4_32b_defconfig
> @@ -8,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_OF_BOARD_SETUP=y
> # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="pci enum; usb start;"
> CONFIG_MISC_INIT_R=y
> # CONFIG_DISPLAY_CPUINFO is not set
> # CONFIG_DISPLAY_BOARDINFO is not set
> @@ -15,6 +17,8 @@ CONFIG_SYS_PROMPT="U-Boot> "
> CONFIG_CMD_DFU=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_USB=y
> CONFIG_CMD_FS_UUID=y
> CONFIG_OF_BOARD=y
> CONFIG_ENV_FAT_INTERFACE="mmc"
> @@ -28,12 +32,17 @@ CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_BCM2835=y
> CONFIG_DM_ETH=y
> CONFIG_BCMGENET=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_PCI_BRCMSTB=y
> CONFIG_PINCTRL=y
> # CONFIG_PINCTRL_GENERIC is not set
> # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
> CONFIG_USB=y
> CONFIG_DM_USB=y
> CONFIG_DM_USB_GADGET=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_PCI=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig
> index 6d148da..f80e5da 100644
> --- a/configs/rpi_4_defconfig
> +++ b/configs/rpi_4_defconfig
> @@ -8,6 +8,8 @@ CONFIG_NR_DRAM_BANKS=2
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_OF_BOARD_SETUP=y
> # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
> +CONFIG_USE_PREBOOT=y
> +CONFIG_PREBOOT="pci enum; usb start;"
> CONFIG_MISC_INIT_R=y
> # CONFIG_DISPLAY_CPUINFO is not set
> # CONFIG_DISPLAY_BOARDINFO is not set
> @@ -15,6 +17,8 @@ CONFIG_SYS_PROMPT="U-Boot> "
> CONFIG_CMD_DFU=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_USB=y
> CONFIG_CMD_FS_UUID=y
> CONFIG_OF_BOARD=y
> CONFIG_ENV_FAT_INTERFACE="mmc"
> @@ -28,12 +32,18 @@ CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_BCM2835=y
> CONFIG_DM_ETH=y
> CONFIG_BCMGENET=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_PCI_BRCMSTB=y
> CONFIG_PINCTRL=y
> # CONFIG_PINCTRL_GENERIC is not set
> # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
> CONFIG_USB=y
> CONFIG_DM_USB=y
> CONFIG_DM_USB_GADGET=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_XHCI_64BIT_DWORD_ACCESS_ONLY=y
> +CONFIG_USB_XHCI_PCI=y
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_MANUFACTURER="FSL"
> CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> diff --git a/configs/rpi_arm64_defconfig b/configs/rpi_arm64_defconfig
> index fea86be..926dfc3 100644
> --- a/configs/rpi_arm64_defconfig
> +++ b/configs/rpi_arm64_defconfig
> @@ -7,13 +7,14 @@ CONFIG_NR_DRAM_BANKS=2
> CONFIG_DISTRO_DEFAULTS=y
> CONFIG_OF_BOARD_SETUP=y
> CONFIG_USE_PREBOOT=y
> -CONFIG_PREBOOT="usb start"
> +CONFIG_PREBOOT="pci enum; usb start;"
> CONFIG_MISC_INIT_R=y
> # CONFIG_DISPLAY_CPUINFO is not set
> # CONFIG_DISPLAY_BOARDINFO is not set
> CONFIG_SYS_PROMPT="U-Boot> "
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_MMC=y
> +CONFIG_CMD_PCI=y
> CONFIG_CMD_USB=y
> CONFIG_CMD_FS_UUID=y
> CONFIG_OF_BOARD=y
> @@ -26,11 +27,17 @@ CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_BCM2835=y
> CONFIG_DM_ETH=y
> CONFIG_BCMGENET=y
> +CONFIG_PCI=y
> +CONFIG_DM_PCI=y
> +CONFIG_PCI_BRCMSTB=y
> CONFIG_PINCTRL=y
> # CONFIG_PINCTRL_GENERIC is not set
> # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
> CONFIG_USB=y
> CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_XHCI_64BIT_DWORD_ACCESS_ONLY=y
> +CONFIG_USB_XHCI_PCI=y
> CONFIG_USB_DWC2=y
> CONFIG_USB_KEYBOARD=y
> CONFIG_USB_HOST_ETHER=y
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200422/607d0e28/attachment.sig>
More information about the U-Boot
mailing list