[PATCH] board: sunxi: enable status LED in SPL

Arnaud Ferraris arnaud.ferraris at collabora.com
Wed Apr 22 12:37:47 CEST 2020


For some systems, such as the PinePhone, there is no way for the end
user to make sure the system is indeed booting before the boot script is
executed, which takes several seconds. Therefore, it can be useful to
provide early visual feedback as soon as possible.

In order achieve this goal, this patch initializes the status LED (if
configured) in the SPL.

Signed-off-by: Arnaud Ferraris <arnaud.ferraris at collabora.com>
---

 board/sunxi/board.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 6afea6ef42..e0424a56ba 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -40,6 +40,9 @@
 #include <spl.h>
 #include <sy8106a.h>
 #include <asm/setup.h>
+#ifdef CONFIG_LED_STATUS
+#include <status_led.h>
+#endif
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
 /* So that we can use pin names in Kconfig and sunxi_name_to_gpio() */
@@ -610,6 +613,10 @@ void sunxi_board_init(void)
 {
 	int power_failed = 0;
 
+#ifdef CONFIG_LED_STATUS
+	status_led_init();
+#endif
+
 #ifdef CONFIG_SY8106A_POWER
 	power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT);
 #endif
-- 
2.26.1



More information about the U-Boot mailing list