[PATCH V3 6/6] ARM: stm32: Implement DDR3 coding on DHCOR SoM

[Marek Vasut]

The DHCOR board does exist in multiple variants with different DDR3
DRAM sizes. To cater for all of them, implement DDR3 code handling.
There are two GPIOs which code the DRAM size populated on the SoM,
read them out and use the value to pick the correct DDR3 config.

Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Patrick Delaunay <patrick.delaunay at st.com>
Cc: Patrice Chotard <patrice.chotard at st.com>
---
V2: Match on compatible string
V3: Add RB from Patrick
---
 arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi |  2 ++
 arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi |  2 ++
 board/dhelectronics/dh_stm32mp1/board.c    | 26 +++++++++++++++++++++-
 configs/stm32mp15_dhcom_basic_defconfig    |  1 +
 configs/stm32mp15_dhcor_basic_defconfig    |  1 +
 5 files changed, 31 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index fa747f7974..aee9ee5844 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/stm32mp1-clksrc.h>
 #include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
 #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
 
 / {
@@ -24,6 +25,7 @@
 		st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
 		st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
 		dh,som-coding-gpios = <&gpiof 12 0>, <&gpiof 13 0>, <&gpiof 15 0>;
+		dh,ddr3-coding-gpios = <&gpioz 6 0>, <&gpioz 7 0>;
 	};
 
 	led {
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
index 915c3a8ae7..3cc76171d4 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
@@ -9,11 +9,13 @@
 
 #include <dt-bindings/clock/stm32mp1-clksrc.h>
 #include "stm32mp15-u-boot.dtsi"
+#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi"
 #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
 
 / {
 	u-boot,dm-pre-reloc;
 	config {
+		dh,ddr3-coding-gpios = <&gpiog 0 0>, <&gpiog 1 0>;
 		dh,som-coding-gpios = <&gpioz 7 0>, <&gpiof 3 0>;
 	};
 };
diff --git a/board/dhelectronics/dh_stm32mp1/board.c b/board/dhelectronics/dh_stm32mp1/board.c
index 5193868d7c..9a2926bbe5 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -135,6 +135,7 @@ int checkboard(void)
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 static u8 brdcode __section("data");
+static u8 ddr3code __section("data");
 static u8 somcode __section("data");
 
 static void board_get_coding_straps(void)
@@ -150,6 +151,7 @@ static void board_get_coding_straps(void)
 	}
 
 	brdcode = 0;
+	ddr3code = 0;
 	somcode = 0;
 
 	ret = gpio_request_list_by_name_nodev(node, "dh,som-coding-gpios",
@@ -158,13 +160,34 @@ static void board_get_coding_straps(void)
 	for (i = 0; i < ret; i++)
 		somcode |= !!dm_gpio_get_value(&(gpio[i])) << i;
 
+	ret = gpio_request_list_by_name_nodev(node, "dh,ddr3-coding-gpios",
+					      gpio, ARRAY_SIZE(gpio),
+					      GPIOD_IS_IN);
+	for (i = 0; i < ret; i++)
+		ddr3code |= !!dm_gpio_get_value(&(gpio[i])) << i;
+
 	ret = gpio_request_list_by_name_nodev(node, "dh,board-coding-gpios",
 					      gpio, ARRAY_SIZE(gpio),
 					      GPIOD_IS_IN);
 	for (i = 0; i < ret; i++)
 		brdcode |= !!dm_gpio_get_value(&(gpio[i])) << i;
 
-	printf("Code:  SoM:rev=%d Board:rev=%d\n", somcode, brdcode);
+	printf("Code:  SoM:rev=%d,ddr3=%d Board:rev=%d\n",
+		somcode, ddr3code, brdcode);
+}
+
+int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
+					 const char *name)
+{
+	if (ddr3code == 2 &&
+	    !strcmp(name, "st,ddr3-1066-888-bin-g-1x4gb-533mhz"))
+		return 0;
+
+	if (ddr3code == 3 &&
+	    !strcmp(name, "st,ddr3-1066-888-bin-g-2x4gb-533mhz"))
+		return 0;
+
+	return -EINVAL;
 }
 
 int board_early_init_f(void)
@@ -537,6 +560,7 @@ int board_late_init(void)
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 	env_set_ulong("dh_som_rev", somcode);
 	env_set_ulong("dh_board_rev", brdcode);
+	env_set_ulong("dh_ddr3_code", ddr3code);
 #endif
 
 	return 0;
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index 58c15fb582..33366b2171 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -14,6 +14,7 @@ CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index e75ed1a932..0b25098d89 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -14,6 +14,7 @@ CONFIG_FIT=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
-- 
2.25.1