[PATCH v2 00/12] stm32mp1: several board and arch updates

[Patrick Delaunay]

It is a V2 for the serie
http://patchwork.ozlabs.org/project/uboot/list/?series=167872

Rebased on master branch and after the first reviews:

[01/16] arm: stm32mp: update dependency for STM32_ETZPC
  is already accepted/merged

[03/16] arm: stm32mp: reset to default environment when serial# change
[04/16] arm: stm32mp: detect U-Boot version used to save environment
[11/16] board: stm32mp1: check env_get result in board_late_init
  are dropped

[05/16] arm: stm32mp: spl: add bsec driver in SPL
  this unrelated patch is moved in a separate serie:
  "stm32mp1: use OPP information for PLL1 settings in SPL"


Changes in v2:
- minor commit message update
- simplify patch after Wolfgang review, as console init alway failed when
  drivers can't probe (remove printf after preloader_console_init call)
- use CONFIG_IS_ENABLED(LED) everywhere
- remove debug message and unused return of board_ev1_init
- remove bootdelay configuration after Wolfgang's comment on dropped patch
  [11/16] board: stm32mp1: check env_get result in board_late_init

Christophe Roullier (1):
  configs: stm32mp1: activate Ethernet PHY Realtek

Patrice Chotard (1):
  board: stm32mp1: Keep error led ON in case of low power detection

Patrick Delaunay (10):
  arm: stm32mp: remove dependency for STM32KEY
  arm: stm32mp: spl: update error management in board_init_f
  board: stm32mp1: update management of boot-led
  board: stm32mp1: gt9147 IRQ before reset on EV1
  board: stm32mp1: set environment variable fdtfile
  board: stm32mp1: remove bootdelay configuration for usb or serial boot
  board: stm32mp1: add timeout for I/O compensation ready
  gpio: stm32: support gpio ops in SPL
  ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX
  configs: stm32mp1: activate CONFIG_ERRNO_STR

 .../dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi   |  49 +++++----
 .../dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi   |  49 +++++----
 arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi      |   4 -
 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi      |   4 -
 arch/arm/mach-stm32mp/Kconfig                 |   2 -
 arch/arm/mach-stm32mp/spl.c                   |   6 +-
 board/st/stm32mp1/stm32mp1.c                  | 102 +++++++++++++-----
 configs/stm32mp15_basic_defconfig             |   2 +
 configs/stm32mp15_trusted_defconfig           |   2 +
 drivers/gpio/stm32_gpio.c                     |   7 +-
 10 files changed, 130 insertions(+), 97 deletions(-)

-- 
2.17.1