[PATCH 08/12] driver: net: fm: add DM MDIO support

Madalin Bucur madalin.bucur at oss.nxp.com
Thu Apr 23 15:25:18 CEST 2020


Allow the MDIO devices to be probed based on the device tree.

Signed-off-by: Madalin Bucur <madalin.bucur at oss.nxp.com>
---
 drivers/net/fm/memac_phy.c | 139 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 137 insertions(+), 2 deletions(-)

diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
index c2ef1b4..4cbfbc7 100644
--- a/drivers/net/fm/memac_phy.c
+++ b/drivers/net/fm/memac_phy.c
@@ -22,6 +22,12 @@
 #define memac_setbits_32(a, v)	setbits_be32(a, v)
 #endif
 
+#ifdef CONFIG_DM_ETH
+struct fm_mdio_priv {
+	struct memac_mdio_controller *regs;
+};
+#endif
+
 static u32 memac_in_32(u32 *reg)
 {
 #ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
@@ -39,10 +45,23 @@ static u32 memac_in_32(u32 *reg)
 int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
 			int regnum, u16 value)
 {
+	struct memac_mdio_controller *regs;
 	u32 mdio_ctl;
-	struct memac_mdio_controller *regs = bus->priv;
 	u32 c45 = 1; /* Default to 10G interface */
 
+#ifndef CONFIG_DM_ETH
+	regs = bus->priv;
+#else
+	struct fm_mdio_priv *priv;
+
+	if (!bus->priv)
+		return -EINVAL;
+	priv = dev_get_priv(bus->priv);
+	regs = priv->regs;
+	debug("memac_mdio_write(regs %p, port %d, dev %d, reg %d, val %#x)\n",
+	      regs, port_addr, dev_addr, regnum, value);
+#endif
+
 	if (dev_addr == MDIO_DEVAD_NONE) {
 		c45 = 0; /* clause 22 */
 		dev_addr = regnum & 0x1f;
@@ -84,13 +103,26 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
 int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
 			int regnum)
 {
+	struct memac_mdio_controller *regs;
 	u32 mdio_ctl;
-	struct memac_mdio_controller *regs = bus->priv;
 	u32 c45 = 1;
 
+#ifndef CONFIG_DM_ETH
+	regs = bus->priv;
+#else
+	struct fm_mdio_priv *priv;
+
+	if (!bus->priv)
+		return -EINVAL;
+	priv = dev_get_priv(bus->priv);
+	regs = priv->regs;
+#endif
+
 	if (dev_addr == MDIO_DEVAD_NONE) {
+#ifndef CONFIG_DM_ETH
 		if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME))
 			return 0xffff;
+#endif
 		c45 = 0; /* clause 22 */
 		dev_addr = regnum & 0x1f;
 		memac_clrbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
@@ -133,6 +165,7 @@ int memac_mdio_reset(struct mii_dev *bus)
 	return 0;
 }
 
+#ifndef CONFIG_DM_ETH
 int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
 {
 	struct mii_dev *bus = mdio_alloc();
@@ -167,3 +200,105 @@ int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
 
 	return mdio_register(bus);
 }
+
+#else /* CONFIG_DM_ETH */
+#if defined(CONFIG_PHYLIB) && defined(CONFIG_DM_MDIO)
+static int fm_mdio_read(struct udevice *dev, int addr, int devad, int reg)
+{
+	struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) :
+						 NULL;
+
+	if (pdata && pdata->mii_bus)
+		return memac_mdio_read(pdata->mii_bus, addr, devad, reg);
+
+	return -1;
+}
+
+static int fm_mdio_write(struct udevice *dev, int addr, int devad, int reg,
+			 u16 val)
+{
+	struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) :
+						 NULL;
+
+	if (pdata && pdata->mii_bus)
+		return memac_mdio_write(pdata->mii_bus, addr, devad, reg, val);
+
+	return -1;
+}
+
+static int fm_mdio_reset(struct udevice *dev)
+{
+	struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) :
+						 NULL;
+
+	if (pdata && pdata->mii_bus)
+		return memac_mdio_reset(pdata->mii_bus);
+
+	return -1;
+}
+
+static const struct mdio_ops fm_mdio_ops = {
+	.read = fm_mdio_read,
+	.write = fm_mdio_write,
+	.reset = fm_mdio_reset,
+};
+
+static const struct udevice_id fm_mdio_ids[] = {
+	{ .compatible = "fsl,fman-memac-mdio" },
+	{}
+};
+
+static int fm_mdio_probe(struct udevice *dev)
+{
+	struct fm_mdio_priv *priv = (dev) ? dev_get_priv(dev) : NULL;
+	struct mdio_perdev_priv *pdata = (dev) ? dev_get_uclass_priv(dev) :
+						 NULL;
+
+	if (!dev) {
+		printf("%s dev = NULL\n", __func__);
+		return -1;
+	}
+	if (!priv) {
+		printf("dev_get_priv(dev %p) = NULL\n", dev);
+		return -1;
+	}
+	priv->regs = (void *)(uintptr_t)dev_read_addr(dev);
+	debug("%s priv %p @ regs %p, pdata %p\n", __func__,
+	      priv, priv->regs, pdata);
+
+	/*
+	 * On some platforms like B4860, default value of MDIO_CLK_DIV bits
+	 * in mdio_stat(mdio_cfg) register generates MDIO clock too high
+	 * (much higher than 2.5MHz), violating the IEEE specs.
+	 * On other platforms like T1040, default value of MDIO_CLK_DIV bits
+	 * is zero, so MDIO clock is disabled.
+	 * So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to
+	 * be properly initialized.
+	 * The default NEG bit should be '1' as per FMANv3 RM, but on platforms
+	 * like T2080QDS, this bit default is '0', which leads to MDIO failure
+	 * on XAUI PHY, so set this bit definitely.
+	 */
+	if (priv && priv->regs && priv->regs->mdio_stat)
+		memac_setbits_32(&priv->regs->mdio_stat,
+				 MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
+
+	return 0;
+}
+
+static int fm_mdio_remove(struct udevice *dev)
+{
+	return 0;
+}
+
+U_BOOT_DRIVER(fman_mdio) = {
+	.name = "fman_mdio",
+	.id = UCLASS_MDIO,
+	.of_match = fm_mdio_ids,
+	.probe = fm_mdio_probe,
+	.remove = fm_mdio_remove,
+	.ops = &fm_mdio_ops,
+	.priv_auto_alloc_size = sizeof(struct fm_mdio_priv),
+	.platdata_auto_alloc_size = sizeof(struct mdio_perdev_priv),
+};
+#endif /* CONFIG_PHYLIB && CONFIG_DM_MDIO */
+#endif /* CONFIG_DM_ETH */
-- 
2.1.0



More information about the U-Boot mailing list