[PATCH 3/6] arm: dts: lx2160aqds: add nodes describing possible mezzanine cards

Priyanka Jain (OSS) priyanka.jain at oss.nxp.com
Fri Apr 24 10:33:57 CEST 2020


>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Ioana Ciornei
>Sent: Wednesday, April 22, 2020 10:39 PM
>To: Priyanka Jain <priyanka.jain at nxp.com>; u-boot at lists.denx.de
>Cc: Alexandru Marginean <alexandru.marginean at nxp.com>; Madalin Bucur
><madalin.bucur at nxp.com>; Florin Laurentiu Chiculita
><florinlaurentiu.chiculita at nxp.com>; Razvan Ionut Cirjan
><razvanionut.cirjan at nxp.com>; Ioana Ciornei <ioana.ciornei at nxp.com>
>Subject: [PATCH 3/6] arm: dts: lx2160aqds: add nodes describing possible
>mezzanine cards
>
>Add device trees describing possible uses of mezzanine cards depending on
>the SERDES protocol employed.
>
>Each SERDES block has a different device tree file per protocol supported,
>where the IO SLOTs used are enabled and PHYs located on the mezzanine
>cards are described. Also, dpmac nodes are edited and their associated phy-
>connection-type and phy-handle are added.
>
>Top DTS files are also added for each combination of protocol on the 3
>SERDES blocks.
Please mention serdes protocols list for which you are adding the support
>
>Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
>---
> arch/arm/dts/Makefile                    |  10 +-
> arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts |  19 +++  arch/arm/dts/fsl-
>lx2160a-qds-19-x-x.dts  |  17 +++  arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts |
>19 +++  arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts  |  17 +++  arch/arm/dts/fsl-
>lx2160a-qds-3-11-x.dts  |  19 +++
> arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts   |  17 +++
> arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts  |  19 +++
> arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts   |  17 +++
> arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi |  75 ++++++++++  arch/arm/dts/fsl-
>lx2160a-qds-sd1-20.dtsi |  39 +++++  arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi
>|  55 +++++++  arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi  | 100 +++++++++++++
>arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi |  76 ++++++++++
> arch/arm/dts/fsl-lx2160a-qds.dts         | 180 +----------------------
> arch/arm/dts/fsl-lx2160a-qds.dtsi        | 169 +++++++++++++++++++++
> 16 files changed, 670 insertions(+), 178 deletions(-)  create mode 100644
>arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi
> create mode 100644 arch/arm/dts/fsl-lx2160a-qds.dtsi
>
>diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
>6d1e8668e7ee..4fe042dbd7ee 100644
>--- a/arch/arm/dts/Makefile
>+++ b/arch/arm/dts/Makefile
>@@ -377,7 +377,15 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
> 	fsl-ls1028a-rdb.dtb \
> 	fsl-ls1028a-qds.dtb \
> 	fsl-lx2160a-rdb.dtb \
>-	fsl-lx2160a-qds.dtb
>+	fsl-lx2160a-qds.dtb \
>+	fsl-lx2160a-qds-3-x-x.dtb \
>+	fsl-lx2160a-qds-3-11-x.dtb \
>+	fsl-lx2160a-qds-7-x-x.dtb \
>+	fsl-lx2160a-qds-7-11-x.dtb \
>+	fsl-lx2160a-qds-19-x-x.dtb \
>+	fsl-lx2160a-qds-19-11-x.dtb \
>+	fsl-lx2160a-qds-20-x-x.dtb \
>+	fsl-lx2160a-qds-20-11-x.dtb
> dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
> 	fsl-ls1043a-qds-lpuart.dtb \
> 	fsl-ls1043a-rdb.dtb \
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-19-11-x.dts
>new file mode 100644
>index 000000000000..585759162f6c
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-19-11-x.dts
>@@ -0,0 +1,19 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 19.11.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-19.dtsi"
>+
>+#include "fsl-lx2160a-qds-sd2-11.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 19.11.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-19-x-x.dts
>new file mode 100644
>index 000000000000..ebe11396a6cb
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-19-x-x.dts
>@@ -0,0 +1,17 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 19.x.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-19.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 19.x.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-20-11-x.dts
>new file mode 100644
>index 000000000000..d9f091896746
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-20-11-x.dts
>@@ -0,0 +1,19 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 20.11.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-20.dtsi"
>+
>+#include "fsl-lx2160a-qds-sd2-11.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 20.11.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-20-x-x.dts
>new file mode 100644
>index 000000000000..735d440d3737
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-20-x-x.dts
>@@ -0,0 +1,17 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 20.x.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-20.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 20.x.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-3-11-x.dts
>new file mode 100644
>index 000000000000..3b21c87b9329
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-3-11-x.dts
>@@ -0,0 +1,19 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 3.11.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-3.dtsi"
>+
>+#include "fsl-lx2160a-qds-sd2-11.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 3.11.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-3-x-x.dts
>new file mode 100644
>index 000000000000..ede40563f71e
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-3-x-x.dts
>@@ -0,0 +1,17 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 3.x.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-3.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 3.x.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-7-11-x.dts
>new file mode 100644
>index 000000000000..8100af47271a
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-7-11-x.dts
>@@ -0,0 +1,19 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 7.11.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-7.dtsi"
>+
>+#include "fsl-lx2160a-qds-sd2-11.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 7.11.x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts b/arch/arm/dts/fsl-
>lx2160a-qds-7-x-x.dts
>new file mode 100644
>index 000000000000..15dee3587f91
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-7-x-x.dts
>@@ -0,0 +1,17 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for SERDES protocol 7.x.x
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+/dts-v1/;
>+
>+#include "fsl-lx2160a-qds-sd1-7.dtsi"
>+
>+/ {
>+	model = "NXP Layerscape LX2160AQDS Board (DTS 7-x-x)";
>+	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
>+
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi b/arch/arm/dts/fsl-
>lx2160a-qds-sd1-19.dtsi
>new file mode 100644
>index 000000000000..a31ff8a1bd85
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-19.dtsi
>@@ -0,0 +1,75 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol
>+19
>+ *
>+ * Some assumptions are made:
>+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC 3,4)
>+ *    * mezzanine card M13 is connected to IO SLOT6 (25g-aui for DPMAC 5,6)
>+ *    * mezzanine card M7 is connected to IO SLOT2 (xlaui4 for DPMAC 2)
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+#include "fsl-lx2160a-qds.dtsi"
>+
>+&dpmac2 {
>+	status = "okay";
>+	phy-handle = <&cortina_phy0>;
>+	phy-connection-type = "xlaui4";
>+};
>+
>+&dpmac3 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy1>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac4 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy2>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac5 {
>+	status = "okay";
>+	phy-handle = <&inphi_phy0>;
>+	phy-connection-type = "25g-aui";
>+};
>+
>+&dpmac6 {
>+	status = "okay";
>+	phy-handle = <&inphi_phy1>;
>+	phy-connection-type = "25g-aui";
>+};
>+
>+&emdio1_slot1 {
>+	aquantia_phy1: ethernet-phy at 4 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x0>;
>+	};
>+
>+	aquantia_phy2: ethernet-phy at 5 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x1>;
>+	};
>+};
>+
>+&emdio1_slot2 {
>+	cortina_phy0: ethernet-phy at 0 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x0>;
>+	};
>+};
>+
>+&emdio1_slot6 {
>+	inphi_phy0: ethernet-phy at 0 {
>+		compatible = "ethernet-phy-id0210.7440";
>+		reg = <0x0>;
>+	};
>+
>+	inphi_phy1: ethernet-phy at 1 {
>+		compatible = "ethernet-phy-id0210.7440";
>+		reg = <0x1>;
>+	};
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi b/arch/arm/dts/fsl-
>lx2160a-qds-sd1-20.dtsi
>new file mode 100644
>index 000000000000..42e149691d5b
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-20.dtsi
>@@ -0,0 +1,39 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol
>+20
>+ *
>+ * Some assumptions are made:
>+ *    * 2 mezzanine cards M13 are connected to IO SLOT1 and IO SLOT2
>+ *        (xlaui4 for DPMAC 1,2)
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+#include "fsl-lx2160a-qds.dtsi"
>+
>+&dpmac1 {
>+	status = "okay";
>+	phy-handle = <&cortina_phy1_0>;
>+	phy-connection-type = "xlaui4";
>+};
>+
>+&dpmac2 {
>+	status = "okay";
>+	phy-handle = <&cortina_phy2_0>;
>+	phy-connection-type = "xlaui4";
>+};
>+
>+&emdio1_slot1 {
>+	cortina_phy1_0: ethernet-phy at 0 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x0>;
>+	};
>+};
>+
>+&emdio1_slot2 {
>+	cortina_phy2_0: ethernet-phy at 0 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x0>;
>+	};
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi b/arch/arm/dts/fsl-
>lx2160a-qds-sd1-3.dtsi
>new file mode 100644
>index 000000000000..256d784aca84
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-3.dtsi
>@@ -0,0 +1,55 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol
>+3
>+ *
>+ * Some assumptions are made:
>+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC
>3,4,5,6)
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+
>+#include "fsl-lx2160a-qds.dtsi"
>+
>+&dpmac3 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy1>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac4 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy2>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac5 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy3>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac6 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy4>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&emdio1_slot1 {
>+	aquantia_phy1: ethernet-phy at 4 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x0>;
>+	};
>+	aquantia_phy2: ethernet-phy at 5 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x1>;
>+	};
>+	aquantia_phy3: ethernet-phy at 6 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x2>;
>+	};
>+	aquantia_phy4: ethernet-phy at 7 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x3>;
>+	};
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi b/arch/arm/dts/fsl-
>lx2160a-qds-sd1-7.dtsi
>new file mode 100644
>index 000000000000..5fcf846c1066
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-sd1-7.dtsi
>@@ -0,0 +1,100 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for the SERDES block #1 - protocol
>+7
>+ *
>+ * Some assumptions are made:
>+ *    * mezzanine card M11 is connected to IO SLOT1 (usxgmii for DPMAC
>3,4,5,6)
>+ *    * mezzanine card M1/M4 is connected to IO SLOT2 (sgmii for DPMAC
>7,8,9,10)
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+#include "fsl-lx2160a-qds.dtsi"
>+
>+&dpmac3 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy1>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac4 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy2>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac5 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy3>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac6 {
>+	status = "okay";
>+	phy-handle = <&aquantia_phy4>;
>+	phy-connection-type = "usxgmii";
>+};
>+
>+&dpmac7 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy1>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac8 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy2>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac9 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy3>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac10 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy4>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&emdio1_slot1 {
>+	aquantia_phy1: ethernet-phy at 4 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x0>;
>+	};
>+
>+	aquantia_phy2: ethernet-phy at 5 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x1>;
>+	};
>+
>+	aquantia_phy3: ethernet-phy at 6 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x2>;
>+	};
>+
>+	aquantia_phy4: ethernet-phy at 7 {
>+		compatible = "ethernet-phy-ieee802.3-c45";
>+		reg = <0x3>;
>+	};
>+};
>+
>+&emdio1_slot2 {
>+	sgmii_phy1: ethernet-phy at 1c {
>+		reg = <0x1c>;
>+	};
>+
>+	sgmii_phy2: ethernet-phy at 1d {
>+		reg = <0x1d>;
>+	};
>+
>+	sgmii_phy3: ethernet-phy at 1e {
>+		reg = <0x1e>;
>+	};
>+
>+	sgmii_phy4: ethernet-phy at 1f {
>+		reg = <0x1f>;
>+	};
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi b/arch/arm/dts/fsl-
>lx2160a-qds-sd2-11.dtsi
>new file mode 100644
>index 000000000000..cf09f98aa60f
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds-sd2-11.dtsi
>@@ -0,0 +1,76 @@
>+// SPDX-License-Identifier: GPL-2.0+ OR X11
>+/*
>+ * NXP LX2160AQDS device tree source for the SERDES block #2 - protocol
>+11
>+ *
>+ * Some assumptions are made:
>+ *    * 2 mezzanine cards M1/M4 are connected to IO SLOT 7 and IO SLOT 8
>+ *       (sgmii for DPMAC 12, 13, 14, 16, 17, 18)
>+ *
>+ * Copyright 2020 NXP
>+ *
>+ */
>+#include "fsl-lx2160a-qds.dtsi"
>+
>+&dpmac12 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy7_2>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac17 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy7_3>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac18 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy7_4>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac16 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy8_2>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac13 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy8_3>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&dpmac14 {
>+	status = "okay";
>+	phy-handle = <&sgmii_phy8_4>;
>+	phy-connection-type = "sgmii";
>+};
>+
>+&emdio1_slot7 {
>+	sgmii_phy7_2: ethernet-phy at 1d {
>+		reg = <0x1d>;
>+	};
>+
>+	sgmii_phy7_3: ethernet-phy at 1e {
>+		reg = <0x1e>;
>+	};
>+
>+	sgmii_phy7_4: ethernet-phy at 1f {
>+		reg = <0x1f>;
>+	};
>+};
>+
>+&emdio1_slot8 {
>+	sgmii_phy8_2: ethernet-phy at 1d {
>+		reg = <0x1d>;
>+	};
>+
>+	sgmii_phy8_3: ethernet-phy at 1e {
>+		reg = <0x1e>;
>+	};
>+
>+	sgmii_phy8_4: ethernet-phy at 1f {
>+		reg = <0x1f>;
>+	};
>+};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-
>qds.dts
>index 4946ce8dfba8..e0f5d5e2d38f 100644
>--- a/arch/arm/dts/fsl-lx2160a-qds.dts
>+++ b/arch/arm/dts/fsl-lx2160a-qds.dts
>@@ -1,14 +1,14 @@
> // SPDX-License-Identifier: GPL-2.0+ OR X11
> /*
>- * NXP LX2160AQDS device tree source
>+ * NXP LX2160AQDS default device tree source
>  *
>- * Copyright 2018-2020 NXP
>+ * Copyright 2020 NXP
>  *
>  */
>
> /dts-v1/;
>
>-#include "fsl-lx2160a.dtsi"
>+#include "fsl-lx2160a-qds.dtsi"
>
> / {
> 	model = "NXP Layerscape LX2160AQDS Board"; @@ -17,177 +17,3
>@@
> 		spi0 = &fspi;
> 	};
> };
>-
>-&dpmac17 {
>-	status = "okay";
>-	phy-handle = <&rgmii_phy1>;
>-	phy-connection-type = "rgmii-id";
>-};
>-
>-&dpmac18 {
>-	status = "okay";
>-	phy-handle = <&rgmii_phy2>;
>-	phy-connection-type = "rgmii-id";
>-};
>-
>-&emdio1 {
>-	status = "okay";
>-};
>-
>-&emdio2 {
>-	status = "okay";
>-};
>-
>-&esdhc0 {
>-	status = "okay";
>-};
>-
>-&esdhc1 {
>-	status = "okay";
>-};
>-
>-&i2c0 {
>-	status = "okay";
>-	u-boot,dm-pre-reloc;
>-
>-	fpga at 66 {
>-		#address-cells = <1>;
>-		#size-cells = <0>;
>-		compatible = "simple-mfd";
>-		reg = <0x66>;
>-
>-		mux-mdio at 54 {
>-			#address-cells = <1>;
>-			#size-cells = <0>;
>-			compatible = "mdio-mux-i2creg";
>-			reg = <0x54>;
>-			#mux-control-cells = <1>;
>-			mux-reg-masks = <0x54 0xf8>; // reg 0x54, bits 7:3
>-			mdio-parent-bus = <&emdio1>;
>-
>-			mdio at 00 {
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-				reg = <0x00>;
>-
>-				rgmii_phy1: ethernet-phy at 1 {
>-					reg = <0x1>;
>-				};
>-			};
>-			mdio at 08 {
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-				reg = <0x40>;
>-
>-				rgmii_phy2: ethernet-phy at 2 {
>-					reg = <0x2>;
>-				};
>-			};
>-
>-			emdio1_slot1: mdio at c0 { /* I/O Slot #1 */
>-				reg = <0xC0>;
>-				device-name = "emdio1_slot1";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot2: mdio at c8 { /* I/O Slot #2 */
>-				reg = <0xC8>;
>-				device-name = "emdio1_slot2";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot3: mdio at d0 { /* I/O Slot #3 */
>-				reg = <0xD0>;
>-				device-name = "emdio1_slot3";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot4: mdio at d8 { /* I/O Slot #4 */
>-				reg = <0xD8>;
>-				device-name = "emdio1_slot4";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot5: mdio at e0 { /* I/O Slot #5 */
>-				reg = <0xE0>;
>-				device-name = "emdio1_slot5";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot6: mdio at e8 { /* I/O Slot #6 */
>-				reg = <0xE8>;
>-				device-name = "emdio1_slot6";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot7: mdio at f0 { /* I/O Slot #7 */
>-				reg = <0xF0>;
>-				device-name = "emdio1_slot7";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-
>-			emdio1_slot8: mdio at f8 { /* I/O Slot #8 */
>-				reg = <0xF8>;
>-				device-name = "emdio1_slot8";
>-				#address-cells = <1>;
>-				#size-cells = <0>;
>-			};
>-		};
>-
>-	};
>-
>-	i2c-mux at 77 {
>-		compatible = "nxp,pca9547";
>-		reg = <0x77>;
>-		#address-cells = <1>;
>-		#size-cells = <0>;
>-
>-		i2c at 3 {
>-			#address-cells = <1>;
>-			#size-cells = <0>;
>-			reg = <0x3>;
>-
>-			rtc at 51 {
>-				compatible = "pcf2127-rtc";
>-				reg = <0x51>;
>-			};
>-		};
>-	};
>-};
>-
>-&fspi {
>-	status = "okay";
>-
>-	mt35xu512aba0: flash at 0 {
>-		#address-cells = <1>;
>-		#size-cells = <1>;
>-		compatible = "jedec,spi-nor";
>-		spi-max-frequency = <50000000>;
>-		reg = <0>;
>-		spi-rx-bus-width = <8>;
>-		spi-tx-bus-width = <1>;
>-	};
>-};
>-
>-&sata0 {
>-	status = "okay";
>-};
>-
>-&sata1 {
>-	status = "okay";
>-};
>-
>-&sata2 {
>-	status = "okay";
>-};
>-
>-&sata3 {
>-	status = "okay";
>-};
>diff --git a/arch/arm/dts/fsl-lx2160a-qds.dtsi b/arch/arm/dts/fsl-lx2160a-
>qds.dtsi
>new file mode 100644
>index 000000000000..129cf82a8f37
>--- /dev/null
>+++ b/arch/arm/dts/fsl-lx2160a-qds.dtsi
<snip>
Is there any particular reason of adding dpmac related changes in one file in previous patch 
And then putting in another fie in next patch. Cant we squash this change with the previous patch?

Regards
Priyanka


More information about the U-Boot mailing list