[PATCH V3 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board

[Patrick DELAUNAY]

Dear Marek,

> From: Marek Vasut <marex at denx.de>
> Sent: mardi 31 mars 2020 19:52
> 
> The AV96 is in fact an assembly of DH Electronics DHCOR SoM on top of an
> AV96 reference board. Split the DTs to reflect that and make sure to DHCOR SoM
> can be reused on other boards easily.
> 
> It is also highly recommended to configure the board for the DHCOM make
> stm32mp15_dhcom_basic_defconfig make DEVICE_TREE=stm32mp15xx-dhcor-
> avenger96
> as that permits reusing the board code for the DH components, like accessing and
> reading out the ethernet MAC from EEPROM.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> ---
> V2: No change
> V3: No change
> ---

Applied to u-boot-stm/master, with few modifications:

arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi

-
-&v3v3 {
-	regulator-always-on;
-};

Not needed as already present in arch/arm/dts/stm32mp15xx-dhcor.dtsi

I solve rebase conflict on arch/arm/dts/stm32mp15xx-dhcor.dtsi

-	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;

And issue after kernel device tree alignment :

arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi 
 
 &sdmmc1_b4_pins_a {
 	u-boot,dm-spl;
-	pins {
+	pins1 {
+		u-boot,dm-spl;
+	};
+	pins2 {
 		u-boot,dm-spl;
 	};
 };

Regards

Patrick