[PATCHv2 3/9] board: lx2160a: Don't program the GIC RD tables if failed to reserve memory

Z.q. Hou zhiqiang.hou at nxp.com
Sat Apr 25 10:38:22 CEST 2020


Hi Wasim,

Thanks a lot for your comments!

> -----Original Message-----
> From: Wasim Khan <wasim.khan at nxp.com>
> Sent: 2020年4月21日 15:29
> To: Z.q. Hou <zhiqiang.hou at nxp.com>; u-boot at lists.denx.de; Priyanka Jain
> <priyanka.jain at nxp.com>; Biwen Li <biwen.li at nxp.com>
> Cc: Z.q. Hou <zhiqiang.hou at nxp.com>
> Subject: RE: [PATCHv2 3/9] board: lx2160a: Don't program the GIC RD tables
> if failed to reserve memory
> 
> 
> 
> > -----Original Message-----
> > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Zhiqiang Hou
> > Sent: Tuesday, March 24, 2020 1:42 PM
> > To: u-boot at lists.denx.de; Priyanka Jain <priyanka.jain at nxp.com>; Biwen
> > Li <biwen.li at nxp.com>
> > Cc: Z.q. Hou <zhiqiang.hou at nxp.com>
> > Subject: [PATCHv2 3/9] board: lx2160a: Don't program the GIC RD tables
> > if failed to reserve memory
> >
> > From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> >
> > Program the GIC redistributor tables only when succeeded to reserve
> > memory for them, otherwise kernel will lose the chance to program them
> > using allocated memory.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> > ---
> > V2:
> >  - The #4 of v1 patchset.
> >
> >  board/freescale/lx2160a/lx2160a.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/board/freescale/lx2160a/lx2160a.c
> > b/board/freescale/lx2160a/lx2160a.c
> > index 595c774b42..7f22110dc6 100644
> > --- a/board/freescale/lx2160a/lx2160a.c
> > +++ b/board/freescale/lx2160a/lx2160a.c
> > @@ -657,6 +657,7 @@ int ft_board_setup(void *blob, bd_t *bd)
> >  	u64 mc_memory_size = 0;
> >  	u16 total_memory_banks;
> >  	u64 gic_lpi_base;
> > +	int ret;
> >
> >  	ft_cpu_setup(blob, bd);
> >
> > @@ -678,8 +679,9 @@ int ft_board_setup(void *blob, bd_t *bd)
> >
> >  #ifdef CONFIG_GIC_V3_ITS
> >  	gic_lpi_base = gd->arch.resv_ram - GIC_LPI_SIZE;
> > -	gic_lpi_tables_init(gic_lpi_base, cpu_numcores());
> > -	fdt_fixup_gic_lpi_memory(blob, gic_lpi_base);
> > +	ret = fdt_fixup_gic_lpi_memory(blob, gic_lpi_base);
> > +	if (!ret && gic_lpi_tables_init(gic_lpi_base, cpu_numcores()))
> > +		debug("%s: failed to init gic-lpi-tables\n", __func__);
> 
> Currently till this point, fdt_fixup_gic_lpi_memory return type is void , you
> may first you need to change fdt_fixup_gic_lpi_memory() to return
> something and then you can check for the errors.
> OR, no need for this patch, as in your later patches you are already doing
> error checking .

Good catch, I lost the change of the return type of fdt_fixup_gic_lpi_memory(),
will add in v3.

Thanks,
Zhiqiang

> 
> >  #endif
> >
> >  #ifdef CONFIG_RESV_RAM
> > --
> > 2.17.1



More information about the U-Boot mailing list