[PATCH] arm: dts: imx8mm: sync dts from Linux Kernel 5.6.7
Adam Ford
aford173 at gmail.com
Mon Apr 27 14:11:19 CEST 2020
This patch synchronizes the device tree with that from 5.6.7.
This also adds nodes for crypto and ddrc, which makes keeping
the device tree files from individual boards in sync with the
Linux kernel. This is helpful when boads reference those nodes.
Signed-off-by: Adam Ford <aford173 at gmail.com>
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index 8aafad2449..1e5e11592f 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -12,7 +12,6 @@
#include "imx8mm-pinfunc.h"
/ {
- compatible = "fsl,imx8mm";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
@@ -141,11 +140,6 @@
};
};
- memory at 40000000 {
- device_type = "memory";
- reg = <0x0 0x40000000 0 0x80000000>;
- };
-
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -233,7 +227,7 @@
ranges = <0x0 0x0 0x0 0x3e000000>;
aips1: bus at 30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>;
@@ -394,7 +388,7 @@
};
sdma2: dma-controller at 302c0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -405,7 +399,7 @@
};
sdma3: dma-controller at 302b0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x302b0000 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -439,7 +433,7 @@
};
anatop: anatop at 30360000 {
- compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+ compatible = "fsl,imx8mm-anatop", "syscon";
reg = <0x30360000 0x10000>;
};
@@ -479,14 +473,18 @@
<&clk IMX8MM_CLK_AUDIO_AHB>,
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
- <&clk IMX8MM_VIDEO_PLL1>;
+ <&clk IMX8MM_VIDEO_PLL1>,
+ <&clk IMX8MM_AUDIO_PLL1>,
+ <&clk IMX8MM_AUDIO_PLL2>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
<&clk IMX8MM_SYS_PLL1_800M>;
assigned-clock-rates = <0>,
<400000000>,
<400000000>,
<750000000>,
- <594000000>;
+ <594000000>,
+ <393216000>,
+ <361267200>;
};
src: reset-controller at 30390000 {
@@ -498,7 +496,7 @@
};
aips2: bus at 30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30400000 0x30400000 0x400000>;
@@ -557,7 +555,7 @@
};
aips3: bus at 30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x30800000 0x30800000 0x400000>;
@@ -638,6 +636,36 @@
status = "disabled";
};
+ crypto: crypto at 30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_AHB>,
+ <&clk IMX8MM_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr at 1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr at 2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr at 3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
i2c1: i2c at 30a20000 {
compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
#address-cells = <1>;
@@ -698,8 +726,6 @@
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
- assigned-clock-rates = <400000000>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
@@ -728,8 +754,6 @@
<&clk IMX8MM_CLK_NAND_USDHC_BUS>,
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
- assigned-clock-rates = <400000000>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
@@ -737,11 +761,11 @@
};
sdma1: dma-controller at 30bd0000 {
- compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+ compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
- <&clk IMX8MM_CLK_SDMA1_ROOT>;
+ <&clk IMX8MM_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -776,7 +800,7 @@
};
aips4: bus at 32c00000 {
- compatible = "fsl,aips-bus", "simple-bus";
+ compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -859,6 +883,16 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ ddrc: memory-controller at 3d400000 {
+ compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+ reg = <0x3d400000 0x400000>;
+ clock-names = "core", "pll", "alt", "apb";
+ clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+ <&clk IMX8MM_DRAM_PLL>,
+ <&clk IMX8MM_CLK_DRAM_ALT>,
+ <&clk IMX8MM_CLK_DRAM_APB>;
+ };
+
ddr-pmu at 3d800000 {
compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
--
2.25.1
More information about the U-Boot
mailing list