[PATCH v1 28/49] board: ns3: define ddr memory layout

Rayagonda Kokatanur rayagonda.kokatanur at broadcom.com
Mon Apr 27 12:51:46 CEST 2020


From: Ray Jui <ray.jui at broadcom.com>

Add both DRAM banks memory information and
the corresponding MMU page table mappings.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty at broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
---
 arch/arm/dts/ns3-board.dts  | 23 ++++++++++
 board/broadcom/bcmns3/ns3.c | 84 +++++++++++++++++++++++++++++++++++--
 configs/bcm_ns3_defconfig   |  2 +
 3 files changed, 106 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/ns3-board.dts b/arch/arm/dts/ns3-board.dts
index ce5012dc52..460ed39132 100644
--- a/arch/arm/dts/ns3-board.dts
+++ b/arch/arm/dts/ns3-board.dts
@@ -5,6 +5,29 @@
 
 /dts-v1/;
 
+#include <dt-bindings/memory/bcm-ns3-mc.h>
+
+/*
+ * Single mem reserve region which includes the following:
+ * Components name	Start Addr	Size
+ * ------------------------------------------------
+ * GIC LPI tables	0x8AD7_0000	0x0009_0000
+ * Nitro FW		0x8AE0_0000	0x0020_0000
+ * Nitro Crash dump	0x8B00_0000	0x0200_0000
+ * OPTEE OS		0x8D00_0000	0x0200_0000
+ * BL31 services	0x8F00_0000	0x0010_0000
+ * Tmon			0x8F10_0000	0x0000_1000
+ * LPM/reserved		0x8F10_1000	0x0000_1000
+ * ATF to Bl33 info	0x8F10_2000	0x0000_1000
+ * ATF error logs	0x8F10_3000	0x0001_0000
+ * Error log parser	0x8F11_3000	0x0010_0000
+ */
+
+/memreserve/ BCM_NS3_MEM_RSVE_START BCM_NS3_MEM_RSVE_END;
+
+/* CRMU page tables */
+/memreserve/ BCM_NS3_CRMU_PGT_START BCM_NS3_CRMU_PGT_SIZE;
+
 #include "ns3.dtsi"
 
 / {
diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c
index 7d0a63f370..c4e36a61d2 100644
--- a/board/broadcom/bcmns3/ns3.c
+++ b/board/broadcom/bcmns3/ns3.c
@@ -15,8 +15,11 @@
 #include <dm/uclass.h>
 #include <dt-bindings/memory/bcm-ns3-mc.h>
 #include <fdtdec.h>
+#include <fdt_support.h>
 #include <wdt.h>
 
+#define BANK_OFFSET(bank)      ((u64)BCM_NS3_DDR_INFO_BASE + 8 + ((bank) * 16))
+
 static struct mm_region ns3_mem_map[] = {
 	{
 		.virt = 0x0UL,
@@ -26,9 +29,15 @@ static struct mm_region ns3_mem_map[] = {
 			 PTE_BLOCK_NON_SHARE |
 			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, {
-		.virt = 0x80000000UL,
-		.phys = 0x80000000UL,
-		.size = 0x80000000UL,
+		.virt = BCM_NS3_MEM_START,
+		.phys = BCM_NS3_MEM_START,
+		.size = BCM_NS3_MEM_LEN,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = BCM_NS3_BANK_1_MEM_START,
+		.phys = BCM_NS3_BANK_1_MEM_START,
+		.size = BCM_NS3_BANK_1_MEM_LEN,
 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 			 PTE_BLOCK_INNER_SHARE
 	}, {
@@ -47,6 +56,72 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 struct bl33_info *bl33_info __section(".data");
 
+/*
+ * Run modulo 256 checksum calculation and return the calculated checksum
+ */
+static u8 checksum_calc(u8 *p, unsigned int len)
+{
+	unsigned int i;
+	u8 chksum = 0;
+
+	for (i = 0; i < len; i++)
+		chksum += p[i];
+
+	return chksum;
+}
+
+/*
+ * This function parses the memory layout informaion from a reserved area in
+ * DDR, and then fix up the FDT before passing it to Linux.
+ *
+ * In the case of error, do nothing and the default memory layout in DT will
+ * be used
+ */
+static void mem_info_parse_fixup(void *fdt)
+{
+	u32 *p32, sig, i, nr_banks;
+	u64 *p64;
+	u64 start[BCM_NS3_MAX_NR_BANKS];
+	u64 len[BCM_NS3_MAX_NR_BANKS];
+
+	/* validate signature */
+	p32 = (u32 *)BCM_NS3_DDR_INFO_BASE;
+	sig = *p32;
+	if (sig != BCM_NS3_DDR_INFO_SIG) {
+		printf("DDR info signature 0x%x invalid\n", sig);
+		return;
+	}
+
+	/* run checksum test to validate data  */
+	if (checksum_calc((u8 *)p32, BCM_NS3_DDR_INFO_LEN) != 0) {
+		printf("Checksum on DDR info failed\n");
+		return;
+	}
+
+	/* parse information for each bank */
+	nr_banks = 0;
+	for (i = 0; i < BCM_NS3_MAX_NR_BANKS; i++) {
+		/* skip banks with a length of zero */
+		p64 = (u64 *)BANK_OFFSET(i);
+		if (*(p64 + 1) == 0)
+			continue;
+
+		start[i] = *p64;
+		len[i] = *(p64 + 1);
+
+		printf("mem[%u] 0x%llx - 0x%llx\n", i, start[i],
+		       start[i] + len[i] - 1);
+		nr_banks++;
+	}
+
+	if (!nr_banks) {
+		printf("No DDR banks detected\n");
+		return;
+	}
+
+	fdt_fixup_memory_banks(fdt, start, len, nr_banks);
+}
+
 int board_init(void)
 {
 	if (bl33_info->version != BL33_INFO_VERSION)
@@ -150,6 +225,9 @@ static int start_wdt(void)
 int ft_board_setup(void *fdt, bd_t *bd)
 {
 	gic_lpi_tables_init(BCM_NS3_GIC_LPI_BASE, MAX_GIC_REDISTRIBUTORS);
+
+	mem_info_parse_fixup(fdt);
+
 	start_wdt();
 
 	return 0;
diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig
index 209b98083e..a72a147179 100644
--- a/configs/bcm_ns3_defconfig
+++ b/configs/bcm_ns3_defconfig
@@ -4,6 +4,7 @@ CONFIG_TARGET_BCMNS3=y
 CONFIG_SYS_TEXT_BASE=0xFF000000
 CONFIG_ENV_SIZE=0x80000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_LOGLEVEL=7
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SILENT_U_BOOT_ONLY=y
@@ -40,3 +41,4 @@ CONFIG_FAT_WRITE=y
 # CONFIG_WATCHDOG is not set
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
+CONFIG_SPL_OF_LIBFDT=y
-- 
2.17.1



More information about the U-Boot mailing list