[PATCH v2 1/4] imxrt1050-evk: README: fix dd command destination

[Fabio Estevam]

Hi Giulio,

On Mon, Apr 27, 2020 at 12:11 PM Giulio Benetti
<giulio.benetti at benettiengineering.com> wrote:
>
> Make "of=" the same for the 2 commands since we're writing to the same
> sd-card.
>
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
> ---
>  board/freescale/imxrt1050-evk/README | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README
> index f7e2894025..55b6a0877a 100644
> --- a/board/freescale/imxrt1050-evk/README
> +++ b/board/freescale/imxrt1050-evk/README
> @@ -11,7 +11,7 @@ This will generate the SPL image called SPL and the u-boot.img.
>
>  - Flash the SPL image into the micro SD card:
>
> -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
> +sudo dd if=SPL of=/dev/sdb bs=1k seek=1; sync

I usually prefer to write /dev/sdX instead because someone may follow
the instructions as is and inadvertently kill their hard disk or
another device that may appear at /dev/sdb.