[PATCH v3 2/4] imxrt1020-evk: README: change dd command destination
Giulio Benetti
giulio.benetti at benettiengineering.com
Mon Apr 27 17:53:04 CEST 2020
Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive
damage.
Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
V2->V3:
* change /dev/sdb to /dev/sdX as suggested by Fabio
---
board/freescale/imxrt1020-evk/README | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README
index 3da72fdad2..abee7ca5f3 100644
--- a/board/freescale/imxrt1020-evk/README
+++ b/board/freescale/imxrt1020-evk/README
@@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img.
- Flash the SPL image into the micro SD card:
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
- Flash the u-boot.img image into the micro SD card:
-sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync
+sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync
- Jumper settings:
--
2.20.1
More information about the U-Boot
mailing list