[PATCHv3 1/8] arm64: fsl-layerscape: Assign addr to resv_ram if enabled RESV_RAM config

Wasim Khan wasim.khan at nxp.com
Tue Apr 28 08:51:57 CEST 2020



> -----Original Message-----
> From: Z.q. Hou <zhiqiang.hou at nxp.com>
> Sent: Tuesday, April 28, 2020 7:49 AM
> To: u-boot at lists.denx.de; Priyanka Jain <priyanka.jain at nxp.com>; Wasim Khan
> <wasim.khan at nxp.com>; bmeng.cn at gmail.com
> Cc: Z.q. Hou <zhiqiang.hou at nxp.com>
> Subject: [PATCHv3 1/8] arm64: fsl-layerscape: Assign addr to resv_ram if
> enabled RESV_RAM config
> 
> From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> 
> The initialization of gd->arch.resv_ram pointer should depend on if the
> RESV_RAM config is enabled.
> 
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Reviewed-by: Wasim Khan <wasim.khan at nxp.com>

> ---
> V3:
>  - No change.
> 
>  arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> index b443894453..1b7729c046 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
> @@ -1379,7 +1379,7 @@ static int tfa_dram_init_banksize(void)
>  	if (i > 0)
>  		ret = 0;
> 
> -#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
> +#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD)
>  	/* Assign memory for MC */
>  #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
>  	if (gd->bd->bi_dram[2].size >=
> @@ -1402,7 +1402,7 @@ static int tfa_dram_init_banksize(void)
>  				board_reserve_ram_top(gd->bd-
> >bi_dram[0].size);
>  		}
>  	}
> -#endif	/* CONFIG_FSL_MC_ENET */
> +#endif	/* CONFIG_RESV_RAM */
> 
>  	return ret;
>  }
> @@ -1465,7 +1465,7 @@ int dram_init_banksize(void)
>  	}
>  #endif	/* CONFIG_SYS_MEM_RESERVE_SECURE */
> 
> -#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
> +#if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD)
>  	/* Assign memory for MC */
>  #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
>  	if (gd->bd->bi_dram[2].size >=
> @@ -1488,7 +1488,7 @@ int dram_init_banksize(void)
>  				board_reserve_ram_top(gd->bd-
> >bi_dram[0].size);
>  		}
>  	}
> -#endif	/* CONFIG_FSL_MC_ENET */
> +#endif	/* CONFIG_RESV_RAM */
> 
>  #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
>  #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
> --
> 2.17.1



More information about the U-Boot mailing list