[PATCH v2 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi

Jagan Teki jagan at amarulasolutions.com
Tue Apr 28 12:00:14 CEST 2020


Move U-Boot specific properties into rk3399-puma u-boot
specific dtsi file.

This would help to sync the devicetrees from Linux whenever
required instead of adding specific nodes.

Cc: Peter Robinson <pbrobinson at gmail.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++
 arch/arm/dts/rk3399-puma.dtsi        | 11 -----------
 2 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi
index 52f62b5d39..e664779227 100644
--- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
@@ -22,3 +22,19 @@
        };
 
 };
+
+&bios_enable {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio1 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&spiflash {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 558b6337df..246a892cb7 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -91,7 +91,6 @@
 	 */
 	bios_enable: bios_enable {
 		compatible = "regulator-fixed";
-		u-boot,dm-pre-reloc;
 		regulator-name = "bios_enable";
 		enable-active-high;
 		gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
@@ -520,14 +519,6 @@
 	status = "okay";
 };
 
-&gpio1 {
-	u-boot,dm-pre-reloc;
-};
-
-&gpio3 {
-	u-boot,dm-pre-reloc;
-};
-
 &pinctrl {
 	/* Pins that are not explicitely used by any devices */
 	pinctrl-names = "default";
@@ -633,8 +624,6 @@
 	#size-cells = <0>;
 
 	spiflash: w25q32dw at 0 {
-		u-boot,dm-pre-reloc;
-
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <49500000>;
-- 
2.17.1



More information about the U-Boot mailing list