[PATCH v2 5/6] arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1

Jagan Teki jagan at amarulasolutions.com
Tue Apr 28 12:00:18 CEST 2020


Sync Firefly ROC-RK3399-PC Mezzanine Board dts file
from Linux v5.7-rc1.

Signed-off-by: Suniel Mahesh <sunil at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/dts/Makefile                    |  1 +
 arch/arm/dts/rk3399-roc-pc-mezzanine.dts | 93 ++++++++++++++++++++++++
 2 files changed, 94 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-roc-pc-mezzanine.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index af7d804b66..409b0d1b3f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-puma-ddr1600.dtb \
 	rk3399-puma-ddr1866.dtb \
 	rk3399-roc-pc.dtb \
+	rk3399-roc-pc-mezzanine.dtb \
 	rk3399-rock-pi-4.dtb \
 	rk3399-rock960.dtb \
 	rk3399-rockpro64.dtb
diff --git a/arch/arm/dts/rk3399-roc-pc-mezzanine.dts b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
new file mode 100644
index 0000000000..2acb3d500f
--- /dev/null
+++ b/arch/arm/dts/rk3399-roc-pc-mezzanine.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl at fivetechno.de>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Mezzanine Board";
+	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+
+	vcc3v3_ngff: vcc3v3-ngff {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_ngff_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
+	status = "okay";
+};
+
+&pinctrl {
+	ngff {
+		vcc3v3_ngff_en: vcc3v3-ngff-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_pcie_en: vcc3v3-pcie-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_perst: pcie-perst {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ngff>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
-- 
2.17.1



More information about the U-Boot mailing list