[PATCH 7/8] ARM: dts: rockchip: amend dwc3 nodes to keep in line with kernel

Frank Wang frank.wang at rock-chips.com
Tue Apr 28 08:34:53 CEST 2020


We have changed to use dwc3 generic driver for Rockchip SoCs
so let amend dts to fix it and keep in line with Linux Kernel.

Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
---
 arch/arm/dts/rk3399-evb.dts     | 28 ++++++++++++---
 arch/arm/dts/rk3399-puma.dtsi   | 35 +++++++++++++++---
 arch/arm/dts/rk3399-u-boot.dtsi | 11 ++++++
 arch/arm/dts/rk3399.dtsi        | 64 +++++++++++++++++++++------------
 4 files changed, 105 insertions(+), 33 deletions(-)

diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
index 4129e902a8..eccf3d40c8 100644
--- a/arch/arm/dts/rk3399-evb.dts
+++ b/arch/arm/dts/rk3399-evb.dts
@@ -56,6 +56,10 @@
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
 		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
 	vcc5v0_typec0: vcc5v0-typec0-en {
@@ -164,6 +168,14 @@
 	status = "okay";
 };
 
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -177,20 +189,26 @@
 };
 
 &usbdrd3_0 {
-	vbus-supply = <&vcc5v0_typec0>;
 	status = "okay";
 };
 
-&usb_host1_ehci {
+&usbdrd3_1 {
 	status = "okay";
 };
 
-&usb_host1_ohci {
+&usbdrd_dwc3_0 {
 	status = "okay";
 };
 
-&usbdrd3_1 {
-	vbus-supply = <&vcc5v0_typec1>;
+&usbdrd_dwc3_1 {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 558b6337df..ff5e6477ed 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -129,6 +129,16 @@
 		regulator-always-on;
 	};
 
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-low;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+	};
+
 	vcc5v0_sys: vcc5v0-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_sys";
@@ -487,6 +497,14 @@
 	status = "okay";
 };
 
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -503,6 +521,18 @@
 	status = "okay";
 };
 
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+};
+
 &usb_host1_ehci {
 	status = "disabled";
 };
@@ -511,11 +541,6 @@
 	status = "disabled";
 };
 
-&usbdrd3_1 {
-	status = "okay";
-	tsd,usb-port-power = "usbhub_enable";
-};
-
 &vopb {
 	status = "okay";
 };
diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index 8b857ccfc7..e65b266604 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -98,6 +98,17 @@
 	u-boot,dm-pre-reloc;
 };
 
+
+&u2phy0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
 &vopb {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index 6b7c136ab8..4d77d88ca1 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -345,22 +345,21 @@
 		status = "disabled";
 	};
 
-	usbdrd3_0: dwc3_typec0: usb at fe800000 {
+	usbdrd3_0: usb0 {
 		compatible = "rockchip,rk3399-dwc3";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
 		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
-			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
-			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
 		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
-			      "aclk_usb3", "grf_clk";
+			      "bus_clk", "grf_clk";
+		power-domains = <&power RK3399_PD_USB3>;
 		resets = <&cru SRST_A_USB3_OTG0>;
 		reset-names = "usb3-otg";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 		status = "disabled";
 
-		usbdrd_dwc3_0: dwc3 {
+		usbdrd_dwc3_0: dwc3 at fe800000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -372,32 +371,33 @@
 			snps,dis-u2-freeclk-exists-quirk;
 			snps,dis_u2_susphy_quirk;
 			snps,dis-del-phy-power-chg-quirk;
-			snps,dis-tx-ipgap-linecheck-quirk;
-			power-domains = <&power RK3399_PD_USB3>;
+			snps,tx-ipgap-linecheck-dis-quirk;
+			snps,xhci-slow-suspend-quirk;
+			snps,xhci-trb-ent-quirk;
+			snps,usb3-warm-reset-on-resume-quirk;
 			status = "disabled";
 		};
 	};
 
-	dwc3_typec1: usbdrd3_1: usb at fe900000 {
+	usbdrd3_1: usb1 {
 		compatible = "rockchip,rk3399-dwc3";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
 		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
-			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
-			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
 		clock-names = "ref_clk", "suspend_clk",
-			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
-			      "aclk_usb3", "grf_clk";
+			      "bus_clk", "grf_clk";
+		power-domains = <&power RK3399_PD_USB3>;
 		resets = <&cru SRST_A_USB3_OTG1>;
 		reset-names = "usb3-otg";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 		status = "disabled";
 
-		usbdrd_dwc3_1: dwc3 {
+		usbdrd_dwc3_1: dwc3 at fe900000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
-			dr_mode = "otg";
+			dr_mode = "host";
 			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
 			phy-names = "usb2-phy", "usb3-phy";
 			phy_type = "utmi_wide";
@@ -405,8 +405,10 @@
 			snps,dis-u2-freeclk-exists-quirk;
 			snps,dis_u2_susphy_quirk;
 			snps,dis-del-phy-power-chg-quirk;
-			snps,dis-tx-ipgap-linecheck-quirk;
-			power-domains = <&power RK3399_PD_USB3>;
+			snps,tx-ipgap-linecheck-dis-quirk;
+			snps,xhci-slow-suspend-quirk;
+			snps,xhci-trb-ent-quirk;
+			snps,usb3-warm-reset-on-resume-quirk;
 			status = "disabled";
 		};
 	};
@@ -1352,6 +1354,7 @@
 	tcphy0: phy at ff7c0000 {
 		compatible = "rockchip,rk3399-typec-phy";
 		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		#phy-cells = <1>;
 		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
 			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
 		clock-names = "tcpdcore", "tcpdphy-ref";
@@ -1363,6 +1366,13 @@
 			 <&cru SRST_P_UPHY0_TCPHY>;
 		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
 		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,usb3-host-disable = <0x2434 0 16>;
+		rockchip,usb3-host-port = <0x2434 12 28>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+		rockchip,uphy-dp-sel = <0x6268 19 19>;
 		status = "disabled";
 
 		tcphy0_dp: dp-port {
@@ -1377,6 +1387,7 @@
 	tcphy1: phy at ff800000 {
 		compatible = "rockchip,rk3399-typec-phy";
 		reg = <0x0 0xff800000 0x0 0x40000>;
+		#phy-cells = <1>;
 		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
 			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
 		clock-names = "tcpdcore", "tcpdphy-ref";
@@ -1388,6 +1399,13 @@
 			 <&cru SRST_P_UPHY1_TCPHY>;
 		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
 		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,usb3-host-disable = <0x2444 0 16>;
+		rockchip,usb3-host-port = <0x2444 12 28>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+		rockchip,uphy-dp-sel = <0x6268 3 19>;
 		status = "disabled";
 
 		tcphy1_dp: dp-port {
-- 
2.17.1





More information about the U-Boot mailing list