[PATCH 1/3][v2] board: freescale: Remove LS2080A_EMU support
Priyanka Jain
priyanka.jain at nxp.com
Tue Apr 28 15:14:02 CEST 2020
Remove LS2080A_EMU as it was pre-silicon
board and is no longer Maintained.
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
Changes for v2:
Add 2/3 patch in series
arch/arm/Kconfig | 12 -----
arch/arm/cpu/armv8/Kconfig | 2 +-
board/freescale/ls2080a/Kconfig | 18 -------
board/freescale/ls2080a/MAINTAINERS | 2 -
configs/ls2080a_emu_defconfig | 37 -------------
drivers/i2c/Kconfig | 4 +-
include/configs/ls2080a_emu.h | 80 -----------------------------
7 files changed, 3 insertions(+), 152 deletions(-)
delete mode 100644 configs/ls2080a_emu_defconfig
delete mode 100644 include/configs/ls2080a_emu.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1bcf345028..e4b29e92c8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1134,18 +1134,6 @@ config TARGET_VEXPRESS64_JUNO
select ARM64
select PL01X_SERIAL
-config TARGET_LS2080A_EMU
- bool "Support ls2080a_emu"
- select ARCH_LS2080A
- select ARM64
- select ARMV8_MULTIENTRY
- select FSL_DDR_SYNC_REFRESH
- help
- Support for Freescale LS2080A_EMU platform.
- The LS2080A Development System (EMULATOR) is a pre-silicon
- development platform that supports the QorIQ LS2080A
- Layerscape Architecture processor.
-
config TARGET_LS2080A_SIMU
bool "Support ls2080a_simu"
select ARCH_LS2080A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 16c83e8614..006453921e 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -99,7 +99,7 @@ config PSCI_RESET
select ARM_SMCCC if OF_CONTROL
depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
!TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
- !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
+ !TARGET_LS2080ARDB && \
!TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
!TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
diff --git a/board/freescale/ls2080a/Kconfig b/board/freescale/ls2080a/Kconfig
index b5033511b5..6015b8f930 100644
--- a/board/freescale/ls2080a/Kconfig
+++ b/board/freescale/ls2080a/Kconfig
@@ -1,21 +1,3 @@
-if TARGET_LS2080A_EMU
-
-config SYS_BOARD
- default "ls2080a"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_SOC
- default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
- default "ls2080a_emu"
-
-source "board/freescale/common/Kconfig"
-
-endif
-
if TARGET_LS2080A_SIMU
config SYS_BOARD
diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS
index e0e4e3f83e..3afaab9c77 100644
--- a/board/freescale/ls2080a/MAINTAINERS
+++ b/board/freescale/ls2080a/MAINTAINERS
@@ -3,7 +3,5 @@ M: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
M: Priyanka Jain <priyanka.jain at nxp.com>
S: Maintained
F: board/freescale/ls2080a/
-F: include/configs/ls2080a_emu.h
-F: configs/ls2080a_emu_defconfig
F: include/configs/ls2080a_simu.h
F: configs/ls2080a_simu_defconfig
diff --git a/configs/ls2080a_emu_defconfig b/configs/ls2080a_emu_defconfig
deleted file mode 100644
index 7927e3838f..0000000000
--- a/configs/ls2080a_emu_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_EMU=y
-CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_IDENT_STRING=" LS2080A-EMU"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU"
-CONFIG_BOOTDELAY=10
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-CONFIG_MP=y
-# CONFIG_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e42b6516bf..02a74eb136 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -214,7 +214,7 @@ endif
if SYS_I2C_MXC_I2C1
config SYS_MXC_I2C1_SPEED
int "I2C Channel 1 speed"
- default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+ default 40000000 if TARGET_LS2080A_SIMU
default 100000
help
MXC I2C Channel 1 speed
@@ -229,7 +229,7 @@ endif
if SYS_I2C_MXC_I2C2
config SYS_MXC_I2C2_SPEED
int "I2C Channel 2 speed"
- default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+ default 40000000 if TARGET_LS2080A_SIMU
default 100000
help
MXC I2C Channel 2 speed
diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h
deleted file mode 100644
index 3e0ad48dda..0000000000
--- a/include/configs/ls2080a_emu.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor
- */
-
-#ifndef __LS2_EMU_H
-#define __LS2_EMU_H
-
-#include "ls2080a_common.h"
-
-#define CONFIG_SYS_CLK_FREQ 100000000
-#define CONFIG_DDR_CLK_FREQ 133333333
-
-#define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR_EMU /* Support emulator */
-#define SPD_EEPROM_ADDRESS1 0x51
-#define SPD_EEPROM_ADDRESS2 0x52
-#define SPD_EEPROM_ADDRESS3 0x53
-#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD on I2C bus 1 */
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL 4
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR 1
-#endif
-
-#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
-/*
- * NOR Flash Timing Params
- */
-#define CONFIG_SYS_NOR0_CSPR \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR0_CSPR_EARLY \
- (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12)
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
- FTIM0_NOR_TEADC(0x1) | \
- FTIM0_NOR_TEAHC(0x1))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
- FTIM1_NOR_TRAD_NOR(0x1))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \
- FTIM2_NOR_TCH(0x0) | \
- FTIM2_NOR_TWP(0x1))
-#define CONFIG_SYS_NOR_FTIM3 0x04000000
-#define CONFIG_SYS_IFC_CCR 0x01000000
-
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
-#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580C00000ULL
-
-/*
- * This trick allows users to load MC images into DDR directly without
- * copying from NOR flash. It dramatically improves speed.
- */
-#define CONFIG_SYS_LS_MC_FW_IN_DDR
-#define CONFIG_SYS_LS_MC_DPL_IN_DDR
-#define CONFIG_SYS_LS_MC_DPC_IN_DDR
-
-#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000
-
-/* Store environment at top of flash */
-
-#endif /* __LS2_EMU_H */
--
2.17.1
More information about the U-Boot
mailing list