[PATCH v2 3/6] clk: rk3399: Set empty for HCLK_SD assigned-clocks

Kever Yang kever.yang at rock-chips.com
Tue Apr 28 16:13:11 CEST 2020


On 2020/4/28 下午6:00, Jagan Teki wrote:
> Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi
> have HCLK_SD assigned-clocks which are usually required for
> Linux and don't require to handle them in U-Boot.
>
>   assigned-clocks = <&cru HCLK_SD>;
>
> So, mark them as empty in clock otherwise device probe on
> those SD controllers would fail.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>


Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> Changes for v2:
> - none
>
>   drivers/clk/rockchip/clk_rk3399.c | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
> index 1f62376595..d822acace1 100644
> --- a/drivers/clk/rockchip/clk_rk3399.c
> +++ b/drivers/clk/rockchip/clk_rk3399.c
> @@ -996,6 +996,7 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
>   		break;
>   	case ACLK_VOP1:
>   	case HCLK_VOP1:
> +	case HCLK_SD:
>   		/**
>   		 * assigned-clocks handling won't require for vopl, so
>   		 * return 0 to satisfy clk_set_defaults during device probe.




More information about the U-Boot mailing list