[PATCH 2/5] ARM: imx: Fix reset in SPL on NXP iMX8MM EVK

Marek Vasut marex at denx.de
Tue Apr 28 16:22:22 CEST 2020


Board files should not re-implement do_reset() to work around this
function not being defined in for specific configurations. Rather,
the fix is to compile in drivers which implement this properly.
This patch enables sysreset and watchdog drivers in SPL and ties
them together to implement the same as the do_reset() hack in the
board file, except correctly in the DM/DT framework.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Flavio Suligoi <f.suligoi at asem.it>
Cc: Harald Seiler <hws at denx.de>
Cc: Igor Opaniuk <igor.opaniuk at toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/dts/imx8mm-evk-u-boot.dtsi | 12 ++++++++++++
 board/freescale/imx8mm_evk/spl.c    |  9 ---------
 configs/imx8mm_evk_defconfig        |  5 +++++
 3 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
index 3502602fbb..b5c12105a9 100644
--- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
@@ -3,6 +3,14 @@
  * Copyright 2019 NXP
  */
 
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog1>;
+		u-boot,dm-spl;
+	};
+};
+
 &{/soc at 0} {
 	u-boot,dm-pre-reloc;
 	u-boot,dm-spl;
@@ -117,3 +125,7 @@
 &fec1 {
 	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 };
+
+&wdog1 {
+	u-boot,dm-spl;
+};
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 5d17f397cb..4d34622465 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -161,12 +161,3 @@ void board_init_f(ulong dummy)
 
 	board_init_r(NULL, 0);
 }
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	puts ("resetting ...\n");
-
-	reset_cpu(WDOG1_BASE_ADDR);
-
-	return 0;
-}
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index 1403067130..61e89633cd 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -30,6 +30,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
 # CONFIG_CMD_EXPORTENV is not set
@@ -82,5 +83,9 @@ CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_MXC_UART=y
 CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_IMX_WATCHDOG=y
-- 
2.25.1



More information about the U-Boot mailing list