[PATCH v2 1/3] net: phy: Add helper routines to set and clear bits
Dan Murphy
dmurphy at ti.com
Tue Apr 28 21:26:04 CEST 2020
Add phy_set/clear_bit helper routines so that ported drivers from the
kernel can use these functions.
Signed-off-by: Dan Murphy <dmurphy at ti.com>
---
include/phy.h | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/include/phy.h b/include/phy.h
index b5de14cbfc29..1a875b96edb7 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -170,6 +170,12 @@ struct fixed_link {
int asym_pause;
};
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to read
+ */
static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
{
struct mii_dev *bus = phydev->bus;
@@ -182,6 +188,13 @@ static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
return bus->read(bus, phydev->addr, devad, regnum);
}
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ */
static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
u16 val)
{
@@ -209,6 +222,13 @@ static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad,
(devad | MII_MMD_CTRL_NOINCR));
}
+/**
+ * phy_read_mmd - Convenience function for reading a register
+ * from an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ */
static inline int phy_read_mmd(struct phy_device *phydev, int devad,
int regnum)
{
@@ -233,6 +253,14 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad,
return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA);
}
+/**
+ * phy_write_mmd - Convenience function for writing a register
+ * on an MMD on a given PHY.
+ * @phydev: The phy_device struct
+ * @devad: The MMD to read from
+ * @regnum: The register on the MMD to read
+ * @val: value to write to @regnum
+ */
static inline int phy_write_mmd(struct phy_device *phydev, int devad,
int regnum, u16 val)
{
@@ -257,6 +285,58 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad,
return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val);
}
+/**
+ * phy_set_bits_mmd - Convenience function for setting bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to set
+ */
+static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
+ u32 regnum, u16 val)
+{
+ int value, ret;
+
+ value = phy_read_mmd(phydev, devad, regnum);
+ if (value < 0)
+ return value;
+
+ value |= val;
+
+ ret = phy_write_mmd(phydev, devad, regnum, value);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/**
+ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
+ * on MMD
+ * @phydev: the phy_device struct
+ * @devad: the MMD containing register to modify
+ * @regnum: register number to modify
+ * @val: bits to clear
+ */
+static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
+ u32 regnum, u16 val)
+{
+ int value, ret;
+
+ value = phy_read_mmd(phydev, devad, regnum);
+ if (value < 0)
+ return value;
+
+ value &= ~val;
+
+ ret = phy_write_mmd(phydev, devad, regnum, value);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
#ifdef CONFIG_PHYLIB_10G
extern struct phy_driver gen10g_driver;
--
2.25.1
More information about the U-Boot
mailing list