[PATCH v1 09/10] pci: Add driver for Broadcom STB PCIe controller

[Sylwester Nawrocki]

Hi Nicolas,

On 4/28/20 15:59, Nicolas Saenz Julienne wrote:
>> +	/*
>> +	 * For config space accesses on the RC, show the right class for
>> +	 * a PCIe-PCIe bridge (the default setting is to be EP mode).
>> +	 */
>> +	tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
>> +	u32p_replace_bits(&tmp, 0x060400,
>> +			  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
>> +	writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
>> +
>> +	if (pcie->ssc) {
>> +		ret = brcm_pcie_set_ssc(base);

> This call should be like this:
> 
> 	ret = brcm_pcie_set_ssc(pcie);
> 
> It builds alright since base is a void pointer. But it obvioulsy causes issues
> further down the line.

Thanks for pointing this out, I have fixed it and re-tested again with
SSC enabled and disabled.

--
Regards,
Sylwester