[PATCH 3/8] ARM: imx8m: Don't use the addr parameter of reset_cpu()

[Harald Seiler]

From: Claudius Heine <ch at denx.de>

imx8m has the only implementation of reset_cpu() which does not ignore
the addr parameter and instead gives it some meaning as the base address
of watchdog registers.  This breaks convention with the rest of U-Boot
where the parameter is ignored and callers are passing in 0.

Fixes: d2041725e84b ("imx8m: restrict reset_cpu")
Co-developed-by: Harald Seiler <hws at denx.de>
Signed-off-by: Harald Seiler <hws at denx.de>
Signed-off-by: Claudius Heine <ch at denx.de>
---
 arch/arm/mach-imx/imx8m/soc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index 5b3fbe712c6b..2fe1fa75fb05 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -385,10 +385,7 @@ int ft_system_setup(void *blob, bd_t *bd)
 #if !CONFIG_IS_ENABLED(SYSRESET)
 void reset_cpu(ulong addr)
 {
-	struct watchdog_regs *wdog = (struct watchdog_regs *)addr;
-
-	if (!addr)
-		wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
 
 	/* Clear WDA to trigger WDOG_B immediately */
 	writew((WCR_WDE | WCR_SRS), &wdog->wcr);
-- 
2.26.2