[PATCH v2 5/9] phy: rockchip: add a new driver for type-c phy

Frank Wang frank.wang at rock-chips.com
Thu Apr 30 04:17:39 CEST 2020


This implements the Type-C PHY driver for Rockchip platform
with Cadence IP block.

Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
Signed-off-by: William Wu <william.wu at rock-chips.com>
---
 drivers/phy/Kconfig                    |   7 +
 drivers/phy/Makefile                   |   1 +
 drivers/phy/phy-rockchip-typec.c       | 523 +++++++++++++++++++++++++
 include/linux/usb/rockchip_phy_typec.h |  52 +++
 4 files changed, 583 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-typec.c
 create mode 100644 include/linux/usb/rockchip_phy_typec.h

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a72f34f0d4..07a060a78a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -90,6 +90,13 @@ config PHY_DA8XX_USB
 	help
 	  Enable this to support the USB PHY on DA8xx SoCs.
 
+config PHY_ROCKCHIP_TYPEC
+	bool "Support Rockchip TYPEC PHY Driver"
+	depends on ARCH_ROCKCHIP
+	select PHY
+	help
+	  Enable this to support the Rockchip USB Type-C PHY.
+
 config PIPE3_PHY
 	bool "Support omap's PIPE3 PHY"
 	depends on PHY && ARCH_OMAP2PLUS
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 43ce62e08c..9ed721b1d5 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o
 obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
 obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
 obj-$(CONFIG_PHY_RCAR_GEN3) += phy-rcar-gen3.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o
 obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o
 obj-$(CONFIG_MESON_G12A_USB_PHY) += meson-g12a-usb2.o meson-g12a-usb3-pcie.o
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 0000000000..2e8c8c8ffe
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd
+ *
+ * Based on drivers/phy/rockchip/phy-rockchip-typec.c in Linux Kernel.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/lists.h>
+#include <dm/of_access.h>
+#include <generic-phy.h>
+#include <power/regulator.h>
+#include <regmap.h>
+#include <reset.h>
+#include <syscon.h>
+#include <asm-generic/io.h>
+#include <asm/arch/clock.h>
+#include <linux/iopoll.h>
+#include <linux/usb/rockchip_phy_typec.h>
+
+#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
+#define CMN_PLL0_INTDIV			(0x94 << 2)
+#define CMN_PLL0_FRACDIV		(0x95 << 2)
+#define CMN_PLL0_HIGH_THR		(0x96 << 2)
+#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
+#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
+#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
+#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
+
+#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n)			((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n)			((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n)			((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n)			((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n)		((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)		((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+
+#define RX_PSC_A0(n)			((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n)			((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n)			((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n)			((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n)			((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n)			((0x8007 | ((n) << 9)) << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | ((n) << 9)) << 2)
+#define RX_REE_CTRL_DATA_MASK(n)	((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
+
+#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
+#define PMA_CMN_CTRL1			(0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
+#define PHY_ISOLATION_CTRL		(0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | ((n) << 6)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL1_DIV1			0x20
+#define CLK_PLL1_DIV2			0x30
+#define CLK_PLL_MASK			0x33
+
+#define CMN_READY			BIT(0)
+#define PHY_MODE_SET_TIMEOUT		100000
+#define MODE_DISCONNECT			0
+#define MODE_UFP_USB			BIT(0)
+#define MODE_DFP_USB			BIT(1)
+#define POWER_ON_TRIES			5
+
+struct phy_reg {
+	u16 value;
+	u32 addr;
+};
+
+static const struct phy_reg usb3_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL0_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL0_VCOCAL_ITER },
+	{ 0xd0,		CMN_PLL0_INTDIV },
+	{ 0x4a4a,	CMN_PLL0_FRACDIV },
+	{ 0x34,		CMN_PLL0_HIGH_THR },
+	{ 0x1ee,	CMN_PLL0_SS_CTRL1 },
+	{ 0x7f03,	CMN_PLL0_SS_CTRL2 },
+	{ 0x20,		CMN_PLL0_DSM_DIAG },
+	{ 0,		CMN_DIAG_PLL0_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBL_OVRD },
+	{ 0x7,		CMN_DIAG_PLL0_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL0_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL0_LF_PROG },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+	u32 i, rdata;
+
+	/*
+	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
+	 */
+	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+	for (i = 0; i < 4; i++) {
+		/*
+		 * The following PHY configuration assumes a 24 MHz reference
+		 * clock.
+		 */
+		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+	}
+
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	rdata &= ~CLK_PLL_MASK;
+	rdata |= CLK_PLL1_DIV2;
+	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* load the configuration of PLL0 */
+	for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+		writel(usb3_pll_cfg[i].value,
+		       tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+	writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+				  const struct usb3phy_reg *reg, bool en)
+{
+	u32 mask = 1 << reg->write_enable;
+	u32 val = en << reg->enable_bit;
+
+	return writel((val | mask), (tcphy->grf_regs + reg->offset));
+}
+
+static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy,
+				       bool value)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+	property_enable(tcphy, &cfg->usb3tousb2_en, value);
+	property_enable(tcphy, &cfg->usb3host_disable, value);
+	property_enable(tcphy, &cfg->usb3host_port, !value);
+
+	return 0;
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret;
+	u32 val;
+
+	reset_deassert(&tcphy->tcphy_rst);
+
+	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+	tcphy_cfg_24m(tcphy);
+
+	tcphy_cfg_usb3_pll(tcphy);
+	if (tcphy->flip) {
+		tcphy_tx_usb3_cfg_lane(tcphy, 3);
+		tcphy_rx_usb3_cfg_lane(tcphy, 2);
+	} else {
+		tcphy_tx_usb3_cfg_lane(tcphy, 0);
+		tcphy_rx_usb3_cfg_lane(tcphy, 1);
+	}
+
+	reset_deassert(&tcphy->uphy_rst);
+
+	ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+				 val, val & CMN_READY, PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "wait pma ready timeout\n");
+		ret = -ETIMEDOUT;
+		goto err_wait_pma;
+	}
+
+	reset_deassert(&tcphy->pipe_rst);
+
+	return 0;
+
+err_wait_pma:
+	reset_assert(&tcphy->uphy_rst);
+	reset_assert(&tcphy->tcphy_rst);
+	return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+	reset_assert(&tcphy->tcphy_rst);
+	reset_assert(&tcphy->uphy_rst);
+	reset_assert(&tcphy->pipe_rst);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+	u8 mode = MODE_DFP_USB | MODE_UFP_USB;
+
+	tcphy->flip = 0;
+
+	return mode;
+}
+
+static int _rockchip_usb3_phy_power_on(struct rockchip_typec_phy *tcphy)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	const struct usb3phy_reg *reg = &cfg->pipe_status;
+	int timeout, new_mode, ret = 0;
+	u32 val;
+
+	new_mode = tcphy_get_mode(tcphy);
+
+	if (tcphy->mode == new_mode)
+		return 0;
+
+	if (tcphy->mode == MODE_DISCONNECT) {
+		ret = tcphy_phy_init(tcphy);
+		if (ret)
+			return ret;
+	}
+
+	/* wait TCPHY for pipe ready */
+	for (timeout = 0; timeout < 100; timeout++) {
+		val = readl(tcphy->grf_regs + reg->offset);
+		if (!(val & BIT(reg->enable_bit))) {
+			tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+
+			/* enable usb3 host */
+			tcphy_cfg_usb3_to_usb2_only(tcphy, false);
+			return 0;
+		}
+		udelay(20);
+	}
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+	return -ETIMEDOUT;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+	struct udevice *parent = dev_get_parent(phy->dev);
+	struct rockchip_typec_phy *tcphy = dev_get_priv(parent);
+	int ret;
+	int tries;
+
+	for (tries = 0; tries < POWER_ON_TRIES; tries++) {
+		ret = _rockchip_usb3_phy_power_on(tcphy);
+		if (!ret)
+			break;
+	}
+
+	if (tries && !ret)
+		dev_err(tcphy->dev, "Needed %d loops to turn on\n", tries);
+
+	return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+	struct udevice *parent = dev_get_parent(phy->dev);
+	struct rockchip_typec_phy *tcphy = dev_get_priv(parent);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		return 0;
+
+	tcphy->mode = MODE_DISCONNECT;
+	tcphy_phy_deinit(tcphy);
+
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+	.power_on	= rockchip_usb3_phy_power_on,
+	.power_off	= rockchip_usb3_phy_power_off,
+};
+
+int rockchip_u3phy_uboot_init(const char *name)
+{
+	struct udevice *udev;
+	struct rockchip_typec_phy *tcphy;
+	int tries;
+	int ret;
+
+	ret = uclass_get_device_by_name(UCLASS_PHY, name, &udev);
+	if (ret) {
+		pr_err("%s: get usb3-phy failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/* Initialize OTG PHY */
+	tcphy = dev_get_priv(udev);
+	for (tries = 0; tries < POWER_ON_TRIES; tries++) {
+		ret = _rockchip_usb3_phy_power_on(tcphy);
+		if (!ret)
+			break;
+	}
+
+	if (tries && !ret)
+		pr_err("%s: needed %d loops to turn on\n", __func__, tries);
+
+	return ret;
+}
+
+static int tcphy_get_param(struct udevice *dev,
+			   struct usb3phy_reg *reg,
+			   const char *name)
+{
+	u32 buffer[3];
+	int ret;
+
+	ret = dev_read_u32_array(dev, name, buffer, 3);
+	if (ret) {
+		pr_err("%s: Can not parse %s\n", __func__, name);
+		return ret;
+	}
+
+	reg->offset = buffer[0];
+	reg->enable_bit = buffer[1];
+	reg->write_enable = buffer[2];
+
+	return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+			  struct udevice *dev)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret;
+
+	ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+			      "rockchip,typec-conn-dir");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+			      "rockchip,usb3tousb2-en");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->usb3host_disable,
+			      "rockchip,usb3-host-disable");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->usb3host_port,
+			      "rockchip,usb3-host-port");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->external_psm,
+			      "rockchip,external-psm");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->pipe_status,
+			      "rockchip,pipe-status");
+	if (ret)
+		return ret;
+
+	tcphy->grf_regs = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	if (IS_ERR(tcphy->grf_regs)) {
+		dev_err(dev, "could not find grf dt node\n");
+		return PTR_ERR(tcphy->grf_regs);
+	}
+
+	ret = reset_get_by_name(dev, "uphy", &tcphy->uphy_rst);
+	if (ret) {
+		dev_err(dev, "no uphy_rst reset control found\n");
+		return ret;
+	}
+
+	ret = reset_get_by_name(dev, "uphy-pipe", &tcphy->pipe_rst);
+	if (ret) {
+		dev_err(dev, "no pipe_rst reset control found\n");
+		return ret;
+	}
+
+	ret = reset_get_by_name(dev, "uphy-pipe", &tcphy->tcphy_rst);
+	if (ret) {
+		dev_err(dev, "no tcphy_rst reset control found\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+	reset_assert(&tcphy->tcphy_rst);
+	reset_assert(&tcphy->uphy_rst);
+	reset_assert(&tcphy->pipe_rst);
+
+	/* select external psm clock */
+	property_enable(tcphy, &cfg->external_psm, 1);
+	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+	tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_bind(struct udevice *parent)
+{
+	struct udevice *dev;
+	ofnode node;
+	const char *name;
+	int ret;
+
+	dev_for_each_subnode(node, parent) {
+		if (!ofnode_valid(node)) {
+			debug("%s: %s subnode not found", __func__, parent->name);
+			return -ENXIO;
+		}
+
+		name = ofnode_get_name(node);
+		debug("%s: subnode %s\n", __func__, name);
+
+		if (!strcasecmp(name, "usb3-port")) {
+			ret = device_bind_driver_to_node(parent, "rockchip_typec_phy_port",
+							 name, node, &dev);
+			if (ret) {
+				pr_err("%s: '%s' cannot bind 'rockchip_typec_phy_port'\n",
+				       __func__, name);
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int rockchip_typec_phy_probe(struct udevice *udev)
+{
+	struct rockchip_typec_phy *tcphy = dev_get_priv(udev);
+	int ret;
+
+	tcphy->base = (void __iomem *)dev_read_addr(udev);
+	if (IS_ERR(tcphy->base))
+		return PTR_ERR(tcphy->base);
+
+	ret = tcphy_parse_dt(tcphy, udev);
+	if (ret)
+		return ret;
+
+	tcphy->dev = udev;
+	typec_phy_pre_init(tcphy);
+
+	dev_info(udev, "Rockchip Type-C PHY is initialized\n");
+	return 0;
+}
+
+static const struct udevice_id rockchip_typec_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3399-typec-phy" },
+	{}
+};
+
+U_BOOT_DRIVER(rockchip_typec_phy_port) = {
+	.name		= "rockchip_typec_phy_port",
+	.id		= UCLASS_PHY,
+	.ops		= &rockchip_usb3_phy_ops,
+};
+
+U_BOOT_DRIVER(rockchip_typec_phy) = {
+	.name		= "rockchip_typec_phy",
+	.id		= UCLASS_PHY,
+	.of_match	= rockchip_typec_phy_dt_ids,
+	.probe		= rockchip_typec_phy_probe,
+	.bind		= rockchip_typec_phy_bind,
+	.priv_auto_alloc_size = sizeof(struct rockchip_typec_phy),
+};
diff --git a/include/linux/usb/rockchip_phy_typec.h b/include/linux/usb/rockchip_phy_typec.h
new file mode 100644
index 0000000000..9551f2be1e
--- /dev/null
+++ b/include/linux/usb/rockchip_phy_typec.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd
+ *
+ * Based on include/soc/rockchip/rockchip_phy_typec.h in Linux Kernel.
+ */
+
+#ifndef __LINUX_ROCKCHIP_PHY_TYPEC_H
+#define __LINUX_ROCKCHIP_PHY_TYPEC_H
+
+#include <reset.h>
+
+struct usb3phy_reg {
+	u32 offset;
+	u32 enable_bit;
+	u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+	struct usb3phy_reg typec_conn_dir;
+	struct usb3phy_reg usb3tousb2_en;
+	struct usb3phy_reg usb3host_disable;
+	struct usb3phy_reg usb3host_port;
+	struct usb3phy_reg external_psm;
+	struct usb3phy_reg pipe_status;
+};
+
+struct rockchip_typec_phy {
+	struct udevice *dev;
+	void __iomem *base;
+	void __iomem *grf_regs;
+	struct reset_ctl uphy_rst;
+	struct reset_ctl pipe_rst;
+	struct reset_ctl tcphy_rst;
+	struct rockchip_usb3phy_port_cfg port_cfgs;
+	/* mutex to protect access to individual PHYs */
+	struct mutex lock;
+
+	bool flip;
+	u8 mode;
+};
+
+#if CONFIG_IS_ENABLED(PHY_ROCKCHIP_TYPEC)
+int rockchip_u3phy_uboot_init(const char *name);
+#else
+static inline int rockchip_u3phy_uboot_init(const char *name)
+{
+	return -ENOTSUPP;
+}
+#endif
+
+#endif /* __LINUX_ROCKCHIP_PHY_TYPEC_H */
-- 
2.17.1





More information about the U-Boot mailing list