Fwd: Re: ZynqMP boot: no messages from SPL other than "Debug uart enabled"

[Major A]

Hi Michal,

> can you please try these files in SD boot mode?

Done, here are two logs, both in SD boot mode.

First, log.sd is with SD card inserted (with the image files that 
apparently refuse to work other than the early UART message).

The other file, log.no-sd, is with no card inserted.

Cheers,

    András

-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.sd
Type: chemical/x-mdl-sdfile
Size: 1804 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200430/29db97cf/attachment.sd>
-------------- next part --------------

****** Xilinx System Debugger (XSDB) v2019.2
  **** Build date : Nov  6 2019-22:12:26
    ** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.


xsdb% cd
xsdb% cd ../../home/u-boot
xsdb% pwd
C:/home/u-boot
xsdb% source script
attempting to launch hw_server

****** Xilinx hw_server v2019.2
  **** Build date : Nov  6 2019 at 22:12:23
    ** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.

INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application



****** Xilinx hw_server v2019.2

  **** Build date : Nov  6 2019 at 22:12:23

    ** Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.



INFO: hw_server application started

INFO: Use Ctrl-C to exit hw_server application




INFO: To connect to this hw_server instance use url: TCP:127.0.0.1:3121



Downloading Program -- C:/home/u-boot/pmufw.elf
        section, .vectors.reset: 0xffdc0000 - 0xffdc0007
        section, .vectors.sw_exception: 0xffdc0008 - 0xffdc000f
        section, .vectors.interrupt: 0xffdc0010 - 0xffdc0017
        section, .vectors.hw_exception: 0xffdc0020 - 0xffdc0027
        section, .text: 0xffdc0050 - 0xffdd108b
        section, .rodata: 0xffdd108c - 0xffdd31a3
        section, .data: 0xffdd31a4 - 0xffdd749b
        section, .sdata2: 0xffdd749c - 0xffdd749f
        section, .sdata: 0xffdd74a0 - 0xffdd749f
        section, .sbss: 0xffdd74a0 - 0xffdd749f
        section, .bss: 0xffdd74a0 - 0xffddb4cb
        section, .srdata: 0xffddb4cc - 0xffddbdef
        section, .stack: 0xffddbdf0 - 0xffddcdef
        section, .xpbr_serv_ext_tbl: 0xffddf6e0 - 0xffddfadf
100%    0MB   0.2MB/s  00:00
Setting PC to Program Start Address 0xffdd02a0
Successfully downloaded C:/home/u-boot/pmufw.elf
Info: MicroBlaze PMU (target 13) Running
Info: Cortex-A53 #0 (target 9) Stopped at 0xffff0000 (External Debug Request)
100%    0MB   0.2MB/s  00:00
Successfully downloaded C:/home/u-boot/spl/u-boot-spl-dtb.bin
Info: Cortex-A53 #0 (target 9) Stopped at 0xfffcc484 (Breakpoint)
udelay() at lib/time.c: 178
178: couldn't open "<u-boot build path>/lib/time.c": no such file or directory
Info: Breakpoint 0 status:
   target 9: {Address: 0xfffcc484 Type: Hardware}
xsdb% Info: Cortex-A53 #0 (target 9) Stopped at 0xfffcc484 (Breakpoint)
178: couldn't open "<u-boot build path>/lib/time.c": no such file or directory
xsdb%