[PATCH 3/3] configs: ls1088aqds_tfa_defconfig: enable DM_ETH and related

[Ioana Ciornei]

Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the
LS1088AQDS board.

Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
 configs/ls1088aqds_tfa_defconfig | 11 ++++++++++-
 include/configs/ls1088aqds.h     |  2 ++
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/configs/ls1088aqds_tfa_defconfig b/configs/ls1088aqds_tfa_defconfig
index 1144cba983c6..a1f3d14980dc 100644
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@@ -4,8 +4,8 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x500000
+CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -24,6 +24,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
@@ -31,6 +32,8 @@ CONFIG_CMD_USB=y
 CONFIG_MP=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-qds"
+CONFIG_OF_LIST="fsl-ls1088a-qds-21-x fsl-ls1088a-qds-29-x"
+CONFIG_MULTI_DTB_FIT=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_IS_IN_NAND=y
@@ -57,8 +60,14 @@ CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_SPANSION=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_MDIO_MUX=y
 CONFIG_E1000=y
 CONFIG_MII=y
+CONFIG_MDIO_MUX_I2CREG=y
+CONFIG_FSL_LS_MDIO=y
 CONFIG_PCI=y
 CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 4ac4a8d85686..122504fb407e 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -549,7 +549,9 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
+#ifndef CONFIG_TARGET_LS1088AQDS
 #define	CONFIG_PHYLIB
+#endif
 #define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
-- 
2.17.1