[PATCH 1/8] rpi: Add identifier for the new RPi400

[Matthias Brugger]

On 19/11/2020 18:48, Nicolas Saenz Julienne wrote:
> The Raspberry Pi Foundation released the new RPi400 which we want to
> detect, so we can enable Ethernet on it and know the correct device tree
> file name.
> 
> So far the Raspberry Pi foundation is using the RPi4b device-tree file
> to boot RPi400. I see no reason not to do the same as they are
> completely compatible.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
> ---
>   board/raspberrypi/rpi/rpi.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> index 6b1fa5fc14..ce60a24352 100644
> --- a/board/raspberrypi/rpi/rpi.c
> +++ b/board/raspberrypi/rpi/rpi.c
> @@ -157,6 +157,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
>   		DTB_DIR "bcm2711-rpi-4-b.dtb",
>   		true,
>   	},
> +	[0x13] = {
> +		"400",

Holding to the documentation this should be "Pi 400". If I don't find any other 
issues, I can fix that up for you. No need for a v2.

> +		DTB_DIR "bcm2711-rpi-4-b.dtb",
> +		true,
> +	},
>   };
>   
>   static const struct rpi_model rpi_models_old_scheme[] = {
>