[PATCH 30/34] ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode

Eugen Hristev eugen.hristev at microchip.com
Thu Dec 3 10:28:46 CET 2020


Add flexcom1 and i2c subnode.

Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
---
 arch/arm/dts/sama7g5.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi
index 4c571befad..4846778ed9 100644
--- a/arch/arm/dts/sama7g5.dtsi
+++ b/arch/arm/dts/sama7g5.dtsi
@@ -121,6 +121,23 @@
 				status = "okay";
 			};
 
+			flx1: flexcom at e181c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xe181c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xe181c000 0x800>;
+				status = "disabled";
+
+				i2c1: i2c at 600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				};
+			};
 			uart0: serial at e1824200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xe1824200 0x200>;
-- 
2.25.1



More information about the U-Boot mailing list