[PATCH v2 00/34] Sama7g5 Evaluation Kit support

[Eugen Hristev]

Hello,

This series adds support for sama7g5 SoC DT and the sama7g5ek board.
I kept the original incremental development for this board, with each
commit's author and designated change, for traceability and for easier
reviewing.

The series starts from a basic devicetree and ends with a fully functional
board including SD-Card/MMC, i2c eeproms, ethernet.

Thanks,
Eugen

Changes in v2:
- fixed compatible for i2c eeprom, mac was not read correctly in latest u-boot version
- fixed some checkpatch warnings and some spacing

Claudiu Beznea (20):
  board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
  configs: sama7g5ek: set malloc pool to 68K
  configs: sama7g5ek: enable pll driver
  ARM: dts: sama7g5: move clock frequencies for xtals in board file
  ARM: dts: sama7g5: add slow rc and main rc oscillators
  ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals
  ARM: dts: sama7g5: add slow clock bindings
  ARM: dts: sama7g5: add PMC bindings
  ARM: dts: sama7g5: switch to PMC bindings
  configs: sama7g5: enable CONFIG_CPU
  ARM: dts: sama7g5: add CPU bindings
  configs: sama7g5: use PIT64B
  ARM: dts: sama7g5: enable autoboot
  ARM: dts: sama7g5: add pit64b support
  configs: sama7g5ek: enable mii command
  ARM: dts: sama7g5: add GMAC0
  ARM: dts: sama7g5: add GMAC1
  board: atmel: sama7g5ek: increase arp timeout and retry count
  configs: sama7g5ek: enable support for KSZ9131
  configs: sama7g5ek: enable CCF

Eugen Hristev (13):
  ARM: dts: sama7g5: add initial DT for sama7g5 SoC
  board: atmel: sama7g5ek: add initial support for sama7g5ek
  ARM: dts: at91: sama7g5: add pinctrl node
  ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3
  ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1
  ARM: dts: at91: sama7g5: add node for sdmmc0
  ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl
  board: atmel: sama7g5ek: clean-up header bootcommand
  configs: sama7g5: add mmc config for sdmmc0
  ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode
  ARM: dts: sama7g5ek: add i2c1 bus and eeproms
  board: atmel: sama7g5ek: add support for MAC address retreival
  configs: sama7g5ek: add i2c and eeprom

Nicolas Ferre (1):
  ARM: dts: sama7g5ek: fix TXC pin configuration

 arch/arm/dts/Makefile              |   3 +
 arch/arm/dts/sama7g5.dtsi          | 170 ++++++++++++++++++++++++
 arch/arm/dts/sama7g5ek-u-boot.dtsi |  65 ++++++++++
 arch/arm/dts/sama7g5ek.dts         | 202 +++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig         |   8 ++
 board/atmel/sama7g5ek/Kconfig      |  15 +++
 board/atmel/sama7g5ek/MAINTAINERS  |   8 ++
 board/atmel/sama7g5ek/Makefile     |   7 +
 board/atmel/sama7g5ek/sama7g5ek.c  |  76 +++++++++++
 configs/sama7g5ek_mmc1_defconfig   |  70 ++++++++++
 configs/sama7g5ek_mmc_defconfig    |  70 ++++++++++
 include/configs/sama7g5ek.h        |  45 +++++++
 12 files changed, 739 insertions(+)
 create mode 100644 arch/arm/dts/sama7g5.dtsi
 create mode 100644 arch/arm/dts/sama7g5ek-u-boot.dtsi
 create mode 100644 arch/arm/dts/sama7g5ek.dts
 create mode 100644 board/atmel/sama7g5ek/Kconfig
 create mode 100644 board/atmel/sama7g5ek/MAINTAINERS
 create mode 100644 board/atmel/sama7g5ek/Makefile
 create mode 100644 board/atmel/sama7g5ek/sama7g5ek.c
 create mode 100644 configs/sama7g5ek_mmc1_defconfig
 create mode 100644 configs/sama7g5ek_mmc_defconfig
 create mode 100644 include/configs/sama7g5ek.h

-- 
2.25.1