[u-boot, v1 0/1] mtd: spi-nor-ids: add Micron MT25QL01G flash

[Hongwei Zhang]

>From:  Patrice CHOTARD <patrice.chotard at foss.st.com>
>
>Hi Hongwei
>
>On 12/4/20 11:06 PM, Hongwei Zhang wrote:
>> Add STMICRO MT25QL01G flash, used on AST2600 board.
>
>MT25QL01G is not a STMicroelectronics flash but a Micron one ;-)

Thanks for the correction, Patrice.

I came back to spi-nor-ids.c, there are two places in the code checking
CONFIG_SPI_FLASH_STMICRO define, at line 167 (a lot of Micron flashes
included in the block), and at line 239, furthermore, there is no
SPI_FLASH_MICRON config menu in Kconfig file. I got confused, why 
SPI_FLASH_MICRON is not in Kconfig?

>
>Patrice
>
>>
>> Signed-off-by: Hongwei Zhang <hongweiz at ami.com>
>> ---
>>  drivers/mtd/spi/spi-nor-ids.c | 1 +
>>  1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/mtd/spi/spi-nor-ids.c
>> b/drivers/mtd/spi/spi-nor-ids.c index 09e8196048..6d22b80586 100644
>> --- a/drivers/mtd/spi/spi-nor-ids.c
>> +++ b/drivers/mtd/spi/spi-nor-ids.c
>> @@ -185,6 +185,7 @@ const struct flash_info spi_nor_ids[] = {
>>      { INFO("n25q512ax3",  0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR |
>SPI_NOR_QUAD_READ) },
>>      { INFO("n25q00",      0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ
>| NO_CHIP_ERASE) },
>>      { INFO("n25q00a",     0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ
>| NO_CHIP_ERASE) },
>> +    { INFO("mt25ql01g",   0x21ba20, 0, 64 * 1024, 2048, SECT_4K | USE_FSR |
>SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
>>      { INFO("mt25qu02g",   0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR |
>SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },