[PATCH v1 2/7] board: toradex: add apalis-imx8x 2gb wb it v1.1a module support

[sbabic at denx.de]

> From: Igor Opaniuk <igor.opaniuk at toradex.com>
> This commit adds initial support for the Toradex Apalis iMX8X 2GB WB
> IT V1.1A System on Module support [1].
> Boot log:
> U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300)
> CPU:   NXP i.MX8QXP RevB A35 at 1200 MHz at 30C
> DRAM:  2 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... OK
> In:    serial at 5a070000
> Out:   serial at 5a070000
> Err:   serial at 5a070000
> Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A,
> Serial# 06617018
> Net:   eth0: ethernet at 5b040000 [PRIME]
> Hit any key to stop autoboot:  0
> Functionality wise the following is known to be working:
>   - eMMC and MMC/SD card
>   - Ethernet (*)
>   - GPIOs
>   - I2C
> Unfortunately, there is no USB functionality for the i.MX 8QXP as of
> yet.
> * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1)
> ETH PHY encounters bring up problems after reset, this will be fixed
> soon on SCU FW side.
> [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
> Acked-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================