[PATCH v5 0/7] Microchip PolarFire SoC support

[Bin Meng]

On Thu, Dec 10, 2020 at 11:03 AM Rick Chen <rickchen36 at gmail.com> wrote:
>
> Hi Padmarao
>
> > From: Padmarao Begari [mailto:padmarao.begari at microchip.com]
> > Sent: Thursday, December 03, 2020 4:32 AM
> > To: u-boot at lists.denx.de; bmeng.cn at gmail.com; Rick Jian-Zhi Chen(陳建志); anup.patel at wdc.com; lukas.auer at aisec.fraunhofer.de; joe.hershberger at ni.com; lukma at denx.de; atish.patra at wdc.com
> > Cc: cyril.jean at microchip.com; lewis.hanly at microchip.com; ivan.griffin at emdalo.com; daire.mcnamara at emdalo.com; conor.dooley at microchip.com; Padmarao Begari
> > Subject: [PATCH v5 0/7] Microchip PolarFire SoC support
> >
> > This patch set adds Microchip PolarFire SoC Icicle Kit support
> > to RISC-V U-Boot.
> >
> > The patches are based upon latest U-Boot tree
> > (https://gitlab.denx.de/u-boot/u-boot.git) at commit id
> > 80cbd731df50b9ab646940ea862b70bcaff37225
> >
> > All drivers namely: NS16550 Serial, Microchip clock,
> > Cadence eMMC and Cadence MACB Ethernet work fine on actual
> > Microchip PolarFire SoC Icicle Kit.
> >
> > Changes in v5:
> > - Replace compatible string "microchip,polarfire-soc" with
> >   "microchip,mpfs-icicle-kit" in the device tree
> > - Use "mpfs" as identifier in place of "polarfire-soc", "pfsoc"
> > - Fix some typos in doc
> > - Rename the clock driver files clk_pfsoc_* to mpfs_clk_*
> > - Rename pfsoc-clock.h to mpfs-clock.h
> >
> > Changes in v4:
> > - Add dual-license GPL or MIT in the device tree
> > - Replace microsemi compatible strings with microchip
> > - Add MACB compatible string for Microchip PolarFire SoC ethernet
> > - Update MACB driver for 32-bit/64-bit DMA based on compatible string
> >
> > Changes in v3:
> > - Add 'default y if 64BIT' for config DMA_ADDR_T_64BIT
> > - Update MACB driver for 32-bit/64-bit DMA based on design config register
> > - Add phy-handle in MACB driver to read the phy address from device tree
> > - Fix checkpatch warnings in the clock driver
> > - Remove fu540 related compatible strings from soc device tree node
> > - Move refclk device tree node under /soc device tree node
> > - Use local-mac-address instead of mac-address in the device tree
> > - Rename device tree to microchip-mpfs-icicle-kit.dts
> > - Add U-Boot specific dts microchip-mpfs-icicle-kit-u-boot.dtsi file
> > - Drop the imply DMA_ADDR_T_64BIT from board config
> > - Fix some typos
> > - Update doc with Microchip and Custom boot-flow
> >
> > Changes in v2:
> > - Add clock frequency for the clint device tree node
> > - Move peripheral device tree nodes under /soc device tree node
> > - Device tree nodes are in order based on the address
> > - Enable UART0 for U-Boot logs
> > - Update doc for the U-Boot logs are on UART0
> > - Move clock and reset index source into patch4
> > - Remove "dma_addr_r" type in the macb driver
> > - Add lower_32_bits() for 32-bit address in the macb driver
> > - Add set_rate() returns the new clock rate in the clock driver
> >
> > Padmarao Begari (7):
> >   riscv: Add DMA 64-bit address support
> >   net: macb: Add DMA 64-bit address support for macb
> >   net: macb: Add phy address to read it from device tree
> >   clk: Add Microchip PolarFire SoC clock driver
> >   riscv: dts: Add device tree for Microchip Icicle Kit
> >   riscv: Add Microchip MPFS Icicle Kit support
> >   doc: board: Add Microchip MPFS Icicle Kit doc
> >
>
> Please check about the CI failure item Job #95.59
> https://travis-ci.org/github/rickchen36/u-boot-riscv/jobs/748298546

I would like to also take a look at the changes today.

Regards,
Bin