[PATCH] arm: ls102xa: select USB PHY erratum's only if USB support is enabled

[Priyanka Jain]

>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Aleksandar
>Gerasimovski
>Sent: Thursday, November 26, 2020 4:23 PM
>To: u-boot at lists.denx.de
>Cc: prabhakar.kushwaha at nxp.com
>Subject: [PATCH] arm: ls102xa: select USB PHY erratum's only if USB support is
>enabled
>
>The USB support is not by default enabled on all designs, so it does not make
>seance to have USB specific erratum's enabled on such a designs.
>
>On our internal Hitachi-Powergrids design not using the USB controller there is a
>crash when accessing those specific memory locations selected by the erratum
>flags.
>
>Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski at hitachi-
>powergrids.com>
>---
<snip>
Applied to fsl-qoriq. 
Awaiting upstream

Regards
Priyanka