[PATCH] bootcount: allow to use this feature on TPL

Philippe Reynes philippe.reynes at softathome.com
Fri Dec 11 19:56:47 CET 2020


This commit add an option TPL_BOOTCOUNT_LIMIT to
use bootcount on TPL.

Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com>
---
 common/spl/Kconfig  | 9 ++++++++-
 common/spl/spl.c    | 4 +++-
 drivers/Makefile    | 1 +
 include/bootcount.h | 6 +++---
 4 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index d8086bd9e8..29c64ebb80 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -177,7 +177,7 @@ config SPL_BOOTROM_SUPPORT
 
 config SPL_BOOTCOUNT_LIMIT
 	bool "Support bootcount in SPL"
-	depends on SPL_ENV_SUPPORT
+	depends on SPL_ENV_SUPPORT && !TPL_BOOTCOUNT_LIMIT
 	help
 	  On some boards, which use 'falcon' mode, it is necessary to check
 	  and increment the number of boot attempts. Such boards do not
@@ -1363,6 +1363,13 @@ config TPL_BOARD_INIT
 	  spl_board_init() from board_init_r(). This function should be
 	  provided by the board.
 
+config TPL_BOOTCOUNT_LIMIT
+	bool "Support bootcount in TPL"
+	depends on TPL_ENV_SUPPORT
+	help
+	  If this option is enabled, the TPL will support bootcount.
+	  For example, it may be useful to choose the device to boot.
+
 config TPL_LDSCRIPT
         string "Linker script for the TPL stage"
 	depends on TPL
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 63c48fbf33..c432f14c29 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -833,7 +833,9 @@ ulong spl_relocate_stack_gd(void)
 #endif
 }
 
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
+	((!defined(CONFIG_TPL_BUILD) && !defined(CONFIG_SPL_BOOTCOUNT_LIMIT)) || \
+	 (defined(CONFIG_TPL_BUILD) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)))
 void bootcount_store(ulong a)
 {
 }
diff --git a/drivers/Makefile b/drivers/Makefile
index e371bc32bb..c562a719f7 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -69,6 +69,7 @@ endif
 
 ifdef CONFIG_TPL_BUILD
 
+obj-$(CONFIG_TPL_BOOTCOUNT_LIMIT) += bootcount/
 obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 
 endif
diff --git a/include/bootcount.h b/include/bootcount.h
index cd30403984..b1d1fe53d1 100644
--- a/include/bootcount.h
+++ b/include/bootcount.h
@@ -69,7 +69,7 @@ void bootcount_store(ulong);
  */
 ulong bootcount_load(void);
 
-#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
+#if defined(CONFIG_SPL_BOOTCOUNT_LIMIT) || defined(CONFIG_TPL_BOOTCOUNT_LIMIT) || defined(CONFIG_BOOTCOUNT_LIMIT)
 
 #if !defined(CONFIG_SYS_BOOTCOUNT_LE) && !defined(CONFIG_SYS_BOOTCOUNT_BE)
 # if __BYTE_ORDER == __LITTLE_ENDIAN
@@ -130,7 +130,7 @@ static inline void bootcount_inc(void)
 
 #ifndef CONFIG_SPL_BUILD
 	/* Only increment bootcount when no bootcount support in SPL */
-#ifndef CONFIG_SPL_BOOTCOUNT_LIMIT
+#if !defined(CONFIG_SPL_BOOTCOUNT_LIMIT) && !defined(CONFIG_TPL_BOOTCOUNT_LIMIT)
 	bootcount_store(++bootcount);
 #endif
 	env_set_ulong("bootcount", bootcount);
@@ -140,5 +140,5 @@ static inline void bootcount_inc(void)
 #else
 static inline int bootcount_error(void) { return 0; }
 static inline void bootcount_inc(void) {}
-#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
+#endif /* CONFIG_SPL_BOOTCOUNT_LIMIT || CONFIG_TPL_BOOTCOUNT_LIMIT || CONFIG_BOOTCOUNT_LIMIT */
 #endif /* _BOOTCOUNT_H__ */
-- 
2.17.1



More information about the U-Boot mailing list