[PATCH 3/7] wdt: aspeed: Add AST2600 watchdog support
Chia-Wei, Wang
chiawei_wang at aspeedtech.com
Mon Dec 14 06:54:25 CET 2020
AST2600 has 8 watchdog timers including 8 sets of
32-bit decrement counters, based on 1MHz clock.
A 64-bit reset mask is also supported to specify
which controllers should be reset by the WDT reset.
Signed-off-by: Chia-Wei, Wang <chiawei_wang at aspeedtech.com>
---
.../arm/include/asm/arch-aspeed/wdt_ast2600.h | 129 ++++++++++++++++++
drivers/watchdog/Kconfig | 9 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/ast2600_wdt.c | 110 +++++++++++++++
4 files changed, 249 insertions(+)
create mode 100644 arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
create mode 100644 drivers/watchdog/ast2600_wdt.c
diff --git a/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h b/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
new file mode 100644
index 0000000000..96e8ca07e3
--- /dev/null
+++ b/arch/arm/include/asm/arch-aspeed/wdt_ast2600.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020 Aspeed Technology Inc.
+ */
+
+#ifndef _ASM_ARCH_WDT_AST2600_H
+#define _ASM_ARCH_WDT_AST2600_H
+
+#define WDT_BASE 0x1e785000
+
+/*
+ * Special value that needs to be written to counter_restart register to
+ * (re)start the timer
+ */
+#define WDT_COUNTER_RESTART_VAL 0x4755
+
+/* reset mode */
+#define WDT_RESET_MODE_SOC 0
+#define WDT_RESET_MODE_CHIP 1
+#define WDT_RESET_MODE_CPU 2
+
+/* bit-fields of WDT control register */
+#define WDT_CTRL_2ND_BOOT BIT(7)
+#define WDT_CTRL_RESET_MODE_MASK GENMASK(6, 5)
+#define WDT_CTRL_RESET_MODE_SHIFT 5
+#define WDT_CTRL_CLK1MHZ BIT(4)
+#define WDT_CTRL_RESET BIT(1)
+#define WDT_CTRL_EN BIT(0)
+
+/* bit-fields of WDT reset mask1 register */
+#define WDT_RESET_MASK1_RVAS BIT(25)
+#define WDT_RESET_MASK1_GPIO1 BIT(24)
+#define WDT_RESET_MASK1_XDMA2 BIT(23)
+#define WDT_RESET_MASK1_XDMA1 BIT(22)
+#define WDT_RESET_MASK1_MCTP2 BIT(21)
+#define WDT_RESET_MASK1_MCTP1 BIT(20)
+#define WDT_RESET_MASK1_JTAG1 BIT(19)
+#define WDT_RESET_MASK1_SD_SDIO1 BIT(18)
+#define WDT_RESET_MASK1_MAC2 BIT(17)
+#define WDT_RESET_MASK1_MAC1 BIT(16)
+#define WDT_RESET_MASK1_GPMCU BIT(15)
+#define WDT_RESET_MASK1_DPMCU BIT(14)
+#define WDT_RESET_MASK1_DP BIT(13)
+#define WDT_RESET_MASK1_HAC BIT(12)
+#define WDT_RESET_MASK1_VIDEO BIT(11)
+#define WDT_RESET_MASK1_CRT BIT(10)
+#define WDT_RESET_MASK1_GCRT BIT(9)
+#define WDT_RESET_MASK1_USB11_UHCI BIT(8)
+#define WDT_RESET_MASK1_USB_PORTA BIT(7)
+#define WDT_RESET_MASK1_USB_PORTB BIT(6)
+#define WDT_RESET_MASK1_COPROC BIT(5)
+#define WDT_RESET_MASK1_SOC BIT(4)
+#define WDT_RESET_MASK1_SLI BIT(3)
+#define WDT_RESET_MASK1_AHB BIT(2)
+#define WDT_RESET_MASK1_SDRAM BIT(1)
+#define WDT_RESET_MASK1_ARM BIT(0)
+
+/* bit-fields of WDT reset mask2 register */
+#define WDT_RESET_MASK2_ESPI BIT(26)
+#define WDT_RESET_MASK2_I3C_BUS8 BIT(25)
+#define WDT_RESET_MASK2_I3C_BUS7 BIT(24)
+#define WDT_RESET_MASK2_I3C_BUS6 BIT(23)
+#define WDT_RESET_MASK2_I3C_BUS5 BIT(22)
+#define WDT_RESET_MASK2_I3C_BUS4 BIT(21)
+#define WDT_RESET_MASK2_I3C_BUS3 BIT(20)
+#define WDT_RESET_MASK2_I3C_BUS2 BIT(19)
+#define WDT_RESET_MASK2_I3C_BUS1 BIT(18)
+#define WDT_RESET_MASK2_I3C_GLOBAL BIT(17)
+#define WDT_RESET_MASK2_I2C BIT(16)
+#define WDT_RESET_MASK2_FSI BIT(15)
+#define WDT_RESET_MASK2_ADC BIT(14)
+#define WDT_RESET_MASK2_PWM BIT(13)
+#define WDT_RESET_MASK2_PECI BIT(12)
+#define WDT_RESET_MASK2_LPC BIT(11)
+#define WDT_RESET_MASK2_MDC_MDIO BIT(10)
+#define WDT_RESET_MASK2_GPIO2 BIT(9)
+#define WDT_RESET_MASK2_JTAG2 BIT(8)
+#define WDT_RESET_MASK2_SD_SDIO2 BIT(7)
+#define WDT_RESET_MASK2_MAC4 BIT(6)
+#define WDT_RESET_MASK2_MAC3 BIT(5)
+#define WDT_RESET_MASK2_SOC BIT(4)
+#define WDT_RESET_MASK2_SLI2 BIT(3)
+#define WDT_RESET_MASK2_AHB2 BIT(2)
+#define WDT_RESET_MASK2_SPI1_SPI2 BIT(1)
+#define WDT_RESET_MASK2_ARM BIT(0)
+
+#define WDT_RESET_MASK1_DEFAULT \
+ (WDT_RESET_MASK1_RVAS | WDT_RESET_MASK1_GPIO1 | \
+ WDT_RESET_MASK1_JTAG1 | WDT_RESET_MASK1_SD_SDIO1 | \
+ WDT_RESET_MASK1_MAC2 | WDT_RESET_MASK1_MAC1 | \
+ WDT_RESET_MASK1_HAC | WDT_RESET_MASK1_VIDEO | \
+ WDT_RESET_MASK1_CRT | WDT_RESET_MASK1_GCRT | \
+ WDT_RESET_MASK1_USB11_UHCI | WDT_RESET_MASK1_USB_PORTA | \
+ WDT_RESET_MASK1_USB_PORTB | WDT_RESET_MASK1_COPROC | \
+ WDT_RESET_MASK1_SOC | WDT_RESET_MASK1_ARM)
+
+#define WDT_RESET_MASK2_DEFAULT \
+ (WDT_RESET_MASK2_I3C_BUS8 | WDT_RESET_MASK2_I3C_BUS7 | \
+ WDT_RESET_MASK2_I3C_BUS6 | WDT_RESET_MASK2_I3C_BUS5 | \
+ WDT_RESET_MASK2_I3C_BUS4 | WDT_RESET_MASK2_I3C_BUS3 | \
+ WDT_RESET_MASK2_I3C_BUS2 | WDT_RESET_MASK2_I3C_BUS1 | \
+ WDT_RESET_MASK2_I3C_GLOBAL | WDT_RESET_MASK2_I2C | \
+ WDT_RESET_MASK2_FSI | WDT_RESET_MASK2_ADC | \
+ WDT_RESET_MASK2_PWM | WDT_RESET_MASK2_PECI | \
+ WDT_RESET_MASK2_LPC | WDT_RESET_MASK2_MDC_MDIO | \
+ WDT_RESET_MASK2_GPIO2 | WDT_RESET_MASK2_JTAG2 | \
+ WDT_RESET_MASK2_SD_SDIO2 | WDT_RESET_MASK2_MAC4 | \
+ WDT_RESET_MASK2_MAC3 | WDT_RESET_MASK2_SOC | \
+ WDT_RESET_MASK2_ARM)
+
+#ifndef __ASSEMBLY__
+struct ast2600_wdt {
+ u32 counter_status;
+ u32 counter_reload_val;
+ u32 counter_restart;
+ u32 ctrl;
+ u32 timeout_status;
+ u32 clr_timeout_status;
+ u32 reset_width;
+ u32 reset_mask1;
+ u32 reset_mask2;
+ u32 sw_reset_ctrl;
+ u32 sw_reset_mask1;
+ u32 sw_reset_mask2;
+ u32 sw_reset_disable;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_WDT_AST2600_H */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4532a40e45..d5edabf3ef 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -86,6 +86,15 @@ config WDT_ASPEED
It currently does not support Boot Flash Addressing Mode Detection or
Second Boot.
+config WDT_AST2600
+ bool "Aspeed AST2600 watchdog timer support"
+ depends on WDT
+ default y if ASPEED_AST2600
+ help
+ Select this to enable watchdog timer for Aspeed ast2500/ast2400 devices.
+ The watchdog timer is stopped when initialized. It performs reset, either
+ full SoC reset or CPU or just some peripherals, based on the flags.
+
config WDT_AT91
bool "AT91 watchdog timer support"
depends on WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 01b8231f2b..cbb6d8407c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
+obj-$(CONFIG_WDT_AST2600) += ast2600_wdt.o
obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
obj-$(CONFIG_WDT_ORION) += orion_wdt.o
diff --git a/drivers/watchdog/ast2600_wdt.c b/drivers/watchdog/ast2600_wdt.c
new file mode 100644
index 0000000000..6f1eb828f1
--- /dev/null
+++ b/drivers/watchdog/ast2600_wdt.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Aspeed Technology, Inc
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <log.h>
+#include <wdt.h>
+#include <asm/io.h>
+#include <asm/arch/wdt_ast2600.h>
+#include <linux/err.h>
+
+struct ast2600_wdt_priv {
+ struct ast2600_wdt *regs;
+};
+
+static int ast2600_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ /* WDT counts in the 1MHz frequency, namely 1us */
+ writel((u32)(timeout_ms * 1000), &wdt->counter_reload_val);
+ writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+ writel(WDT_CTRL_EN | WDT_CTRL_RESET, &wdt->ctrl);
+
+ return 0;
+}
+
+static int ast2600_wdt_stop(struct udevice *dev)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ clrbits_le32(&wdt->ctrl, WDT_CTRL_EN);
+
+ writel(WDT_RESET_MASK1_DEFAULT, &wdt->reset_mask1);
+ writel(WDT_RESET_MASK2_DEFAULT, &wdt->reset_mask2);
+
+ return 0;
+}
+
+static int ast2600_wdt_reset(struct udevice *dev)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+
+ return 0;
+}
+
+static int ast2600_wdt_expire_now(struct udevice *dev, ulong flags)
+{
+ int ret;
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+ struct ast2600_wdt *wdt = priv->regs;
+
+ ret = ast2600_wdt_start(dev, 1, flags);
+ if (ret)
+ return ret;
+
+ while (readl(&wdt->ctrl) & WDT_CTRL_EN)
+ ;
+
+ return ast2600_wdt_stop(dev);
+}
+
+static int ast2600_wdt_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ast2600_wdt_priv *priv = dev_get_priv(dev);
+
+ priv->regs = dev_read_addr_ptr(dev);
+ if (!priv->regs)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct wdt_ops ast2600_wdt_ops = {
+ .start = ast2600_wdt_start,
+ .reset = ast2600_wdt_reset,
+ .stop = ast2600_wdt_stop,
+ .expire_now = ast2600_wdt_expire_now,
+};
+
+static const struct udevice_id ast2600_wdt_ids[] = {
+ { .compatible = "aspeed,ast2600-wdt" },
+ { }
+};
+
+static int ast2600_wdt_probe(struct udevice *dev)
+{
+ debug("%s() wdt%u\n", __func__, dev->seq);
+ ast2600_wdt_stop(dev);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(ast2600_wdt) = {
+ .name = "ast2600_wdt",
+ .id = UCLASS_WDT,
+ .of_match = ast2600_wdt_ids,
+ .probe = ast2600_wdt_probe,
+ .priv_auto_alloc_size = sizeof(struct ast2600_wdt_priv),
+ .ofdata_to_platdata = ast2600_wdt_ofdata_to_platdata,
+ .ops = &ast2600_wdt_ops,
+};
--
2.17.1
More information about the U-Boot
mailing list