[PATCH v2 0/5] video: seps525: Add new driver for seps525 OLED display

[Michal Simek]

Hi,

This driver is connected via spi on one ZynqMP board. Only 8bit SPI
connection is supported now. Spi zynq driver was used for testing this
driver.
We have tested load image via BMP command and also using it as console as
is visible from log in the last patch.

Thanks,
Michal

Changes in v2:
- New patch is series
- New patch is series
- Add support for returning value
- Update kernel-doc format to pass kernel-doc script
- Update patch subject s/call/operation/
- Fix Kconfig entry and use VIDEO_SEPS525 instead of SEPS525 and fix
  location
- Add kernel-doc structure for seps525_priv structure
- Remove flags variable and use macros directly

Michal Simek (4):
  video: Fix video sync kernel-doc format
  video: Let video_sync to return error value
  video: Introduce video_sync operation
  video: seps525: Add seps525 SPI driver

Vikhyat Goyal (1):
  video: seps525: Add dt binding description

 MAINTAINERS                                   |   2 +
 .../video/syncoam,seps525.txt                 |  24 ++
 drivers/video/Kconfig                         |   7 +
 drivers/video/Makefile                        |   1 +
 drivers/video/seps525.c                       | 327 ++++++++++++++++++
 drivers/video/vidconsole-uclass.c             |  40 ++-
 drivers/video/video-uclass.c                  |  21 +-
 include/video.h                               |  22 +-
 8 files changed, 424 insertions(+), 20 deletions(-)
 create mode 100644 doc/device-tree-bindings/video/syncoam,seps525.txt
 create mode 100644 drivers/video/seps525.c

-- 
2.29.2