[PATCH v3 17/28] x86: Drop unnecessary mp_init logic

[Simon Glass]

Now that sequence numbers are set up when devices are bound, this code is
not needed. Also, we should use dev_seq() instead of req_seq. Update the
whole file accordingly.

Also fix up APL cpu while we are here.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 arch/x86/cpu/apollolake/cpu.c |  2 +-
 arch/x86/cpu/mp_init.c        | 23 +++++++----------------
 arch/x86/include/asm/mp.h     |  2 +-
 3 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/arch/x86/cpu/apollolake/cpu.c b/arch/x86/cpu/apollolake/cpu.c
index d37f91d1ce1..328f79255f8 100644
--- a/arch/x86/cpu/apollolake/cpu.c
+++ b/arch/x86/cpu/apollolake/cpu.c
@@ -63,7 +63,7 @@ static int apl_get_info(const struct udevice *dev, struct cpu_info *info)
 
 static int acpi_cpu_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx)
 {
-	uint core_id = dev->req_seq;
+	uint core_id = dev_seq(dev);
 	int cores_per_package;
 	int ret;
 
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index a0e112178db..0e61c7b5d7f 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -87,7 +87,7 @@ DECLARE_GLOBAL_DATA_PTR;
  *			intel,apic-id = <2>;
  *		};
  *
- * Here the 'reg' property is the CPU number and then is placed in dev->req_seq
+ * Here the 'reg' property is the CPU number and then is placed in dev_seq(cpu)
  * so that we can index into ap_callbacks[] using that. The APIC ID is different
  * and may not be sequential (it typically is if hyperthreading is supported).
  *
@@ -135,7 +135,7 @@ struct mp_flight_plan {
  *
  * @func: Function to run
  * @arg: Argument to pass to the function
- * @logical_cpu_number: Either a CPU number (i.e. dev->req_seq) or a special
+ * @logical_cpu_number: Either a CPU number (i.e. dev_seq(cpu) or a special
  *	value like MP_SELECT_BSP. It tells the AP whether it should process this
  *	callback
  */
@@ -152,7 +152,7 @@ static struct mp_flight_plan mp_info;
  * ap_callbacks - Callback mailbox array
  *
  * Array of callback, one entry for each available CPU, indexed by the CPU
- * number, which is dev->req_seq. The entry for the main CPU is never used.
+ * number, which is dev_seq(cpu). The entry for the main CPU is never used.
  * When this is NULL, there is no pending work for the CPU to run. When
  * non-NULL it points to the mp_callback structure. This is shared between all
  * CPUs, so should only be written by the main CPU.
@@ -562,7 +562,7 @@ static int get_bsp(struct udevice **devp, int *cpu_countp)
 	if (cpu_countp)
 		*cpu_countp = ret;
 
-	return dev->req_seq >= 0 ? dev->req_seq : 0;
+	return dev_seq(dev) >= 0 ? dev_seq(dev) : 0;
 }
 
 /**
@@ -614,7 +614,7 @@ static void store_callback(struct mp_callback **slot, struct mp_callback *val)
 static int run_ap_work(struct mp_callback *callback, struct udevice *bsp,
 		       int num_cpus, uint expire_ms)
 {
-	int cur_cpu = bsp->req_seq;
+	int cur_cpu = dev_seq(bsp);
 	int num_aps = num_cpus - 1; /* number of non-BSPs to get this message */
 	int cpus_accepted;
 	ulong start;
@@ -679,7 +679,7 @@ static int ap_wait_for_instruction(struct udevice *cpu, void *unused)
 	if (!IS_ENABLED(CONFIG_SMP_AP_WORK))
 		return 0;
 
-	per_cpu_slot = &ap_callbacks[cpu->req_seq];
+	per_cpu_slot = &ap_callbacks[dev_seq(cpu)];
 
 	while (1) {
 		struct mp_callback *cb = read_callback(per_cpu_slot);
@@ -694,7 +694,7 @@ static int ap_wait_for_instruction(struct udevice *cpu, void *unused)
 		mfence();
 		if (lcb.logical_cpu_number == MP_SELECT_ALL ||
 		    lcb.logical_cpu_number == MP_SELECT_APS ||
-		    cpu->req_seq == lcb.logical_cpu_number)
+		    dev_seq(cpu) == lcb.logical_cpu_number)
 			lcb.func(lcb.arg);
 
 		/* Indicate we are finished */
@@ -839,7 +839,6 @@ int mp_init(void)
 	int num_aps, num_cpus;
 	atomic_t *ap_count;
 	struct udevice *cpu;
-	struct uclass *uc;
 	int ret;
 
 	if (IS_ENABLED(CONFIG_QFW)) {
@@ -848,14 +847,6 @@ int mp_init(void)
 			return ret;
 	}
 
-	/*
-	 * Multiple APs are brought up simultaneously and they may get the same
-	 * seq num in the uclass_resolve_seq() during device_probe(). To avoid
-	 * this, set req_seq to the reg number in the device tree in advance.
-	 */
-	uclass_id_foreach_dev(UCLASS_CPU, cpu, uc)
-		cpu->req_seq = dev_read_u32_default(cpu, "reg", -1);
-
 	ret = get_bsp(&cpu, &num_cpus);
 	if (ret < 0) {
 		debug("Cannot init boot CPU: err=%d\n", ret);
diff --git a/arch/x86/include/asm/mp.h b/arch/x86/include/asm/mp.h
index 5f9b8c65643..1e4e35321de 100644
--- a/arch/x86/include/asm/mp.h
+++ b/arch/x86/include/asm/mp.h
@@ -114,7 +114,7 @@ typedef void (*mp_run_func)(void *arg);
  * Running on anything other than the boot CPU is only supported if
  * CONFIG_SMP_AP_WORK is enabled
  *
- * @cpu_select: CPU to run on (its dev->req_seq value), or MP_SELECT_ALL for
+ * @cpu_select: CPU to run on (its dev_seq() value), or MP_SELECT_ALL for
  *	all, or MP_SELECT_BSP for BSP
  * @func: Function to run
  * @arg: Argument to pass to the function
-- 
2.29.2.684.gfbc64c5ab5-goog