[EXT] RE: [PATCH v1 1/2] imx8mp: configs: add support for distro boot commands
Alice Guo (OSS)
alice.guo at oss.nxp.com
Fri Dec 18 03:28:46 CET 2020
> -----Original Message-----
> From: ZHIZHIKIN Andrey <andrey.zhizhikin at leica-geosystems.com>
> Sent: 2020年12月17日 19:21
> To: Alice Guo (OSS) <alice.guo at oss.nxp.com>; sbabic at denx.de;
> festevam at gmail.com; Peng Fan <peng.fan at nxp.com>
> Cc: dl-uboot-imx <uboot-imx at nxp.com>; Ye Li <ye.li at nxp.com>;
> u-boot at lists.denx.de; Alice Guo <alice.guo at nxp.com>
> Subject: [EXT] RE: [PATCH v1 1/2] imx8mp: configs: add support for distro boot
> commands
>
> Caution: EXT Email
>
> Hello Alice,
>
> > -----Original Message-----
> > From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Alice Guo
> > (OSS)
> > Sent: Thursday, December 17, 2020 11:29 AM
> > To: sbabic at denx.de; festevam at gmail.com; peng.fan at nxp.com
> > Cc: uboot-imx at nxp.com; ye.li at nxp.com; u-boot at lists.denx.de; Alice Guo
> > <alice.guo at nxp.com>
> > Subject: [PATCH v1 1/2] imx8mp: configs: add support for distro boot
> > commands
> >
> > From: Alice Guo <alice.guo at nxp.com>
> >
> > Supported boot device types in iMX8MP: MMC.
> >
> > CONFIG_CMD_PART is added for command part and
> CONFIG_CMD_FS_GENERIC is
> > for command fstype.
> >
> > scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be
> > loaded to prior to execution. kernel_addr_r is the location in RAM
> > where the kernel will be loaded to. Delete unnecessary environment
> > variables because "run distro_bootcmd" is set to be the default boot mode.
> >
> > On the iMX8MP platform I used, "mmc1" represents SD card and "mmc2"
> > represents eMMC.
> >
> > Signed-off-by: Alice Guo <alice.guo at nxp.com>
> > ---
> > configs/imx8mp_evk_defconfig | 2 ++
> > include/configs/imx8mp_evk.h | 66
> > ++++++------------------------------
> > 2 files changed, 13 insertions(+), 55 deletions(-)
> >
> > diff --git a/configs/imx8mp_evk_defconfig
> > b/configs/imx8mp_evk_defconfig index cd5724e811..7831a940a3 100644
> > --- a/configs/imx8mp_evk_defconfig
> > +++ b/configs/imx8mp_evk_defconfig
> > @@ -51,6 +51,8 @@ CONFIG_CMD_EXT2=y
> > CONFIG_CMD_EXT4=y
> > CONFIG_CMD_EXT4_WRITE=y
> > CONFIG_CMD_FAT=y
> > +CONFIG_CMD_PART=y
> > +CONFIG_CMD_FS_GENERIC=y
> > CONFIG_OF_CONTROL=y
> > CONFIG_SPL_OF_CONTROL=y
> > CONFIG_ENV_OVERWRITE=y
> > diff --git a/include/configs/imx8mp_evk.h
> > b/include/configs/imx8mp_evk.h index 8253c6aa2f..70f5fb2928 100644
> > --- a/include/configs/imx8mp_evk.h
> > +++ b/include/configs/imx8mp_evk.h
> > @@ -44,69 +44,25 @@
> >
> > #endif
> >
> > +#ifndef CONFIG_SPL_BUILD
> > +#define BOOT_TARGET_DEVICES(func) \
> > + func(MMC, mmc, 1) \
> > + func(MMC, mmc, 2)
> > +
> > +#include <config_distro_bootcmd.h>
> > +#endif
> > +
> > /* Initial environment variables */
> > #define CONFIG_EXTRA_ENV_SETTINGS \
> > - "script=boot.scr\0" \
> > + BOOTENV \
> > + "scriptaddr=0x43500000\0" \
> > + "kernel_addr_r=0x40880000\0" \
> > "image=Image\0" \
> > "console=ttymxc1,115200
> earlycon=ec_imx6q,0x30890000,115200\0" \
> > "fdt_addr=0x43000000\0" \
> > - "boot_fdt=try\0" \
> > "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
> > - "initrd_addr=0x43800000\0" \
> > - "bootm_size=0x10000000\0" \
>
> I believe that without proper bootm_size set, FIT image cannot be loaded
> correctly.
>
> Commit acbc1d86f1 ("imx8m: config: convert to bootm_size") had this
> addressed, and removing the "bootm_size" would break FIT load again.
>
> Have you tested your implementation with "bootm" in boot script? So far, I see
> that only "booti" has been used.
Hi,
Thank you for your advice. I have no need to support FIT image so that I did not notice this problem.
I will check and modify it.
Best Regards,
Alice
> > - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> > "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART)
> "\0" \
> > "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
> > - "mmcautodetect=yes\0" \
> > - "mmcargs=setenv bootargs ${jh_clk} console=${console}
> root=${mmcroot}\0
> > " \
> > - "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
> > ${script};\0" \
> > - "bootscript=echo Running bootscript from mmc ...; " \
> > - "source\0" \
> > - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
> ${image}\0" \
> > - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr}
> ${fdt_file}\0" \
> > - "mmcboot=echo Booting from mmc ...; " \
> > - "run mmcargs; " \
> > - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> > - "if run loadfdt; then " \
> > - "booti ${loadaddr} - ${fdt_addr}; " \
> > - "else " \
> > - "echo WARN: Cannot load the DT; " \
> > - "fi; " \
> > - "else " \
> > - "echo wait for boot; " \
> > - "fi;\0" \
> > - "netargs=setenv bootargs ${jh_clk} console=${console} " \
> > - "root=/dev/nfs " \
> > - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> > - "netboot=echo Booting from net ...; " \
> > - "run netargs; " \
> > - "if test ${ip_dyn} = yes; then " \
> > - "setenv get_cmd dhcp; " \
> > - "else " \
> > - "setenv get_cmd tftp; " \
> > - "fi; " \
> > - "${get_cmd} ${loadaddr} ${image}; " \
> > - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> > - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
> > - "booti ${loadaddr} - ${fdt_addr}; " \
> > - "else " \
> > - "echo WARN: Cannot load the DT; " \
> > - "fi; " \
> > - "else " \
> > - "booti; " \
> > - "fi;\0"
> > -
> > -#define CONFIG_BOOTCOMMAND \
> > - "mmc dev ${mmcdev}; if mmc rescan; then " \
> > - "if run loadbootscript; then " \
> > - "run bootscript; " \
> > - "else " \
> > - "if run loadimage; then " \
> > - "run mmcboot; " \
> > - "else run netboot; " \
> > - "fi; " \
> > - "fi; " \
> > - "else booti ${loadaddr} - ${fdt_addr}; fi"
> >
> > /* Link Definitions */
> > #define CONFIG_LOADADDR 0x40480000
> > --
> > 2.17.1
>
> -- Andrey
More information about the U-Boot
mailing list