[PATCH v2] Nokia RX-51: Enable usbtty serial console by default
Lokesh Vutla
lokeshvutla at ti.com
Tue Dec 22 16:38:45 CET 2020
On 22/12/20 8:47 pm, Pali Rohár wrote:
> On Tuesday 22 December 2020 20:39:11 Lokesh Vutla wrote:
>>
>>
>> On 22/12/20 8:38 pm, Lokesh Vutla wrote:
>>>
>>>
>>> On 22/12/20 8:36 pm, Lokesh Vutla wrote:
>>>>
>>>>
>>>> On 22/12/20 8:28 pm, Pali Rohár wrote:
>>>>> On Tuesday 22 December 2020 19:56:51 Lokesh Vutla wrote:
>>>>>>
>>>>>>
>>>>>> On 01/12/20 12:57 am, Pali Rohár wrote:
>>>>>>> Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for
>>>>>>> Nokia RX-51 board by default.
>>>>>>>
>>>>>>> Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and
>>>>>>> include U-Boot string into USB product name to indicate usage of U-Boot.
>>>>>>>
>>>>>>> CONFIG_CONSOLE_MUX is already used and U-Boot console is available for
>>>>>>> all in/out devices. Therefore there is no need to have separate commands
>>>>>>> 'run sercon', 'run usbcon' and 'run vgacon', so remove them.
>>>>>>>
>>>>>>> As space for U-Boot is limited to 256kB, disable some other unused options
>>>>>>> so CONFIG_USB_TTY can be enabled.
>>>>>>>
>>>>>>> Nokia RX-51 does not have easily accessible UART serial console so the only
>>>>>>> option for easy debugging is to use device's keyboard+screen or this usbtty
>>>>>>> serial console over USB.
>>>>>>>
>>>>>>> Signed-off-by: Pali Rohár <pali at kernel.org>
>>>>>>> ---
>>>>>>> Changes since v1:
>>>>>>> * Fixed USB product id and product name
>>>>>>> * Disabled some other options to free more space
>>>>>>> * Changes now passed CI tests:
>>>>>>> https://dev.azure.com/u-boot/u-boot/_build/results?buildId=1492&view=results
>>>>>>>
>>>>>>> Note that this patch depends on other Nokia RX-51 patches which are on
>>>>>>> mailing list, otherwise CI tests do not pass:
>>>>>>>
>>>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201121223011.14262-1-pali@kernel.org/
>>>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201121223317.14347-1-pali@kernel.org/
>>>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201129161505.5092-1-pali@kernel.org/
>>>>>>> https://patchwork.ozlabs.org/project/uboot/patch/20201130191034.795-1-pali@kernel.org/
>>>>>>
>>>>>> okay, Ill wait for all these patches to get merged, before I pick this patch.
>>>>>
>>>>> Web pages for all these patches is saying:
>>>>>
>>>>> State: Under Review
>>>>> Delegated to: Lokesh Vutla
>>>>>
>>>>> So I think these patches are also waiting for you.
>>>>
>>>> The main patch I need is this[0]. Without this I am getting a build failure as
>>>> you mentioned in the commit description. So, Until [0] patch is applied I cannot
>>>> apply this patch. Since you combined disabling of other configs in the same
>>>> patch, it is causing my pipeline failure.
>>>>
>>>> Can you split the disabling of other configs into a separate patch so that
>>>> others are unblocked?
>>>
>>> [0]
>>> https://patchwork.ozlabs.org/project/uboot/patch/20201130192715.1793-1-pali@kernel.org/
>>
>> ahh copy paste issues:
>> [0]
>> https://patchwork.ozlabs.org/project/uboot/patch/20201129164618.5829-3-pali@kernel.org/
>
> Sorry, now I'm somehow lost.
>
> All patches are in my git repository git://github.com/pali/u-boot.git in
> branch nokia-rx51. And this branch passed pipeline checks.
Yeah because there is a usb patch that is not in my queue which is fixing build
issues.
Let me give more details. Below are the patches that are in my queue:
[v2] Nokia RX-51: Enable usbtty serial console by default
Nokia RX-51: Do not try calling both ext2load and ext4load
Nokia RX-51: Add test for U-Boot serial console Nokia RX-51:
Nokia RX-51: Convert to CONFIG_DM_MMC
Nokia RX-51: Decrease i2c speed to 100000
Issue1:
If I apply all these patches I get this build error
https://pastebin.ubuntu.com/p/R7P6z8RJJZ/
When I saw you queue, the patch [0] is fixing the build error. But it[0] is
assigned to Marek. So I bisecting the error to $patch and dropped it from my
queue for now.
Issue2:
After applying the below 4 patches, I see the Gitlab pipeline error[1].
Nokia RX-51: Do not try calling both ext2load and ext4load
Nokia RX-51: Add test for U-Boot serial console Nokia RX-51:
Nokia RX-51: Convert to CONFIG_DM_MMC
Nokia RX-51: Decrease i2c speed to 100000
This error[1] can be solved by disabling unnecessary configs like the ones you
disabled in $patch
+# CONFIG_DM_WARN is not set
+# CONFIG_DM_SEQ_ALIAS is not set
+# CONFIG_BLOCK_CACHE is not set
+# CONFIG_SYS_DEVICE_NULLDEV is not set
I am asking to send the above as a separate patch so that the 4 patches can be
un blocked.
Hope this is clear.
[0]
https://patchwork.ozlabs.org/project/uboot/patch/20201129164618.5829-3-pali@kernel.org/
[1] https://gitlab.denx.de/u-boot/custodians/u-boot-ti/-/jobs/192532
Thanks and regards,
Lokesh
>
> It took me some time to prepare all patches in state that after applying
> all of them whole pipeline pass.
>
> As this starting to be complicated, could you please tell me which
> commit/patch either needs to be modified or if needed how to change
> order of them?
>
>> Thanks and regards,
>> Lokesh
>>
>>
>>>
>>> Sorry missed this.
>>>
>>> Thanks and regards,
>>> Lokesh
>>>
>>>>
>>>> Thanks and regards,
>>>> Lokesh
>>>>
>>>>>
>>>>>> Thanks and regards,
>>>>>> Lokesh
>>>>>>
>>>>>>> ---
>>>>>>> configs/nokia_rx51_defconfig | 8 +++++---
>>>>>>> doc/README.nokia_rx51 | 15 +--------------
>>>>>>> include/configs/nokia_rx51.h | 21 +++++++--------------
>>>>>>> 3 files changed, 13 insertions(+), 31 deletions(-)
>>>>>>>
>>>>>>> diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
>>>>>>> index 0f05fe6fc3..963dd145ce 100644
>>>>>>> --- a/configs/nokia_rx51_defconfig
>>>>>>> +++ b/configs/nokia_rx51_defconfig
>>>>>>> @@ -44,18 +44,16 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=onenand:128k(bootloader)ro,384k(config),256k(l
>>>>>>> CONFIG_ENV_OVERWRITE=y
>>>>>>> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>>>>>> # CONFIG_NET is not set
>>>>>>> -CONFIG_TWL4030_LED=y
>>>>>>> # CONFIG_MMC_HW_PARTITIONING is not set
>>>>>>> +# CONFIG_MMC_VERBOSE is not set
>>>>>>> CONFIG_MMC_OMAP_HS=y
>>>>>>> CONFIG_MTD=y
>>>>>>> CONFIG_CONS_INDEX=3
>>>>>>> CONFIG_SYS_NS16550=y
>>>>>>> CONFIG_SPI=y
>>>>>>> CONFIG_USB=y
>>>>>>> -CONFIG_USB_MUSB_HCD=y
>>>>>>> CONFIG_USB_MUSB_UDC=y
>>>>>>> CONFIG_USB_OMAP3=y
>>>>>>> -CONFIG_TWL4030_USB=y
>>>>>>> CONFIG_CFB_CONSOLE=y
>>>>>>> CONFIG_CFB_CONSOLE_ANSI=y
>>>>>>> # CONFIG_VGA_AS_SINGLE_DEVICE is not set
>>>>>>> @@ -66,3 +64,7 @@ CONFIG_DM_I2C=y
>>>>>>> CONFIG_DM_MMC=y
>>>>>>> # CONFIG_DM_DEVICE_REMOVE is not set
>>>>>>> # CONFIG_SYS_MALLOC_F is not set
>>>>>>> +# CONFIG_DM_WARN is not set
>>>>>>> +# CONFIG_DM_SEQ_ALIAS is not set
>>>>>>> +# CONFIG_BLOCK_CACHE is not set
>>>>>>> +# CONFIG_SYS_DEVICE_NULLDEV is not set
>>>>>>> diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
>>>>>>> index 320b5efc7d..84d1912ddd 100644
>>>>>>> --- a/doc/README.nokia_rx51
>>>>>>> +++ b/doc/README.nokia_rx51
>>>>>>> @@ -24,8 +24,7 @@ called u-boot-gen-combined. It is available in following repository:
>>>>>>> There is support for hardware watchdog. Hardware watchdog is started by
>>>>>>> NOLO so u-boot must kick watchdog to prevent reboot device (but not very
>>>>>>> often, max every 2 seconds). There is also support for framebuffer display
>>>>>>> -output with ANSI escape codes and the N900 HW keyboard input. USB tty works
>>>>>>> -but is disabled because it prevents the current Maemo kernel from booting.
>>>>>>> +output with ANSI escape codes and the N900 HW keyboard input.
>>>>>>>
>>>>>>> When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
>>>>>>> which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
>>>>>>> @@ -49,10 +48,6 @@ Boot from SD or eMMC in this order:
>>>>>>>
>>>>>>> Available additional commands/variables:
>>>>>>>
>>>>>>> - * run sercon - Use serial port for control
>>>>>>> - * run usbcon - Use usbtty for control
>>>>>>> - * run vgacon - Use framebuffer and HW keyboard for control (default)
>>>>>>> -
>>>>>>> * run sdboot - Boot from external SD card (see boot order)
>>>>>>> * run emmcboot - Boot from internal eMMC memory (see boot order)
>>>>>>> * run attachboot - Boot attached kernel image (attached to U-Boot binary)
>>>>>>> @@ -87,14 +82,6 @@ Additional variables for booting kernel:
>>>>>>> and u-boot standard output is set to serial then setup_console_atag is
>>>>>>> automatically set to 1. So output from Maemo kernel would go to serial port.
>>>>>>>
>>>>>>> -USB TTY:
>>>>>>> -
>>>>>>> - Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
>>>>>>> - For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
>>>>>>> -
>>>>>>> - #define CONFIG_USB_TTY
>>>>>>> -
>>>>>>> -
>>>>>>> UBIFS support:
>>>>>>>
>>>>>>> UBIFS support is disabled, because U-Boot image is too big and cannot be
>>>>>>> diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
>>>>>>> index 3f2700d8e2..23368de624 100644
>>>>>>> --- a/include/configs/nokia_rx51.h
>>>>>>> +++ b/include/configs/nokia_rx51.h
>>>>>>> @@ -70,10 +70,12 @@
>>>>>>>
>>>>>>> /* USB device configuration */
>>>>>>> #define CONFIG_USB_DEVICE
>>>>>>> +#define CONFIG_USB_TTY
>>>>>>> #define CONFIG_USBD_VENDORID 0x0421
>>>>>>> -#define CONFIG_USBD_PRODUCTID 0x01c8
>>>>>>> +#define CONFIG_USBD_PRODUCTID_CDCACM 0x01c8
>>>>>>> +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x01c8
>>>>>>> #define CONFIG_USBD_MANUFACTURER "Nokia"
>>>>>>> -#define CONFIG_USBD_PRODUCT_NAME "N900"
>>>>>>> +#define CONFIG_USBD_PRODUCT_NAME "N900 (U-Boot)"
>>>>>>>
>>>>>>> #define GPIO_SLIDE 71
>>>>>>>
>>>>>>> @@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>>>>>>> /* Environment information */
>>>>>>> #define CONFIG_EXTRA_ENV_SETTINGS \
>>>>>>> "usbtty=cdc_acm\0" \
>>>>>>> - "stdin=serial,vga\0" \
>>>>>>> - "stdout=serial,vga\0" \
>>>>>>> - "stderr=serial,vga\0" \
>>>>>>> - "setcon=setenv stdin ${con};" \
>>>>>>> - "setenv stdout ${con};" \
>>>>>>> - "setenv stderr ${con}\0" \
>>>>>>> - "sercon=setenv con serial; run setcon\0" \
>>>>>>> - "usbcon=setenv con usbtty; run setcon\0" \
>>>>>>> - "vgacon=setenv con vga; run setcon\0" \
>>>>>>> + "stdin=usbtty,serial,vga\0" \
>>>>>>> + "stdout=usbtty,serial,vga\0" \
>>>>>>> + "stderr=usbtty,serial,vga\0" \
>>>>>>> "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
>>>>>>> "switchmmc=mmc dev ${mmcnum}\0" \
>>>>>>> "kernaddr=0x82008000\0" \
>>>>>>> @@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
>>>>>>> #define CONFIG_POSTBOOTMENU \
>>>>>>> "echo;" \
>>>>>>> "echo Extra commands:;" \
>>>>>>> - "echo run sercon - Use serial port for control.;" \
>>>>>>> - "echo run usbcon - Use usbtty for control.;" \
>>>>>>> - "echo run vgacon - Use framebuffer/keyboard.;" \
>>>>>>> "echo run sdboot - Boot from SD card slot.;" \
>>>>>>> "echo run emmcboot - Boot internal eMMC memory.;" \
>>>>>>> "echo run attachboot - Boot attached kernel image.;" \
>>>>>>>
More information about the U-Boot
mailing list