[PATCH 2/2] arm: dart6ul: read and print SoM info from eeprom on startup
ferlandm at amotus.ca
ferlandm at amotus.ca
Tue Dec 22 20:24:12 CET 2020
From: Marc Ferland <ferlandm at amotus.ca>
The dart6ul has an i2c eeprom at 0x50 which contains, among other
things, the manufacturing/revision/options info of the SoM. This patch
replaces the current checkboard() implementation with a more
exhaustive one based on the content of the eeprom.
Since this code uses the new driver model, some changes were also
required in the DTS to make the nodes related to i2c available before
relocation.
This code was inspired from the supported u-boot code from Variscite
which can be found here:
https://github.com/varigit/uboot-imx/tree/imx_v2018.03_4.14.78_1.0.0_ga_var02
New output example:
Board: PN: VSM-6UL-705B, Assy: AS1812142257, Date: 2019 Feb 17
Storage: eMMC, Wifi: yes, DDR: 1024 MiB, Rev: 2.4G
Signed-off-by: Marc Ferland <ferlandm at amotus.ca>
---
arch/arm/dts/imx6ull-dart-6ul.dtsi | 8 +++
board/variscite/dart_6ul/dart_6ul.c | 104 +++++++++++++++++++++++++++-
configs/variscite_dart6ul_defconfig | 2 +
3 files changed, 113 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx6ull-dart-6ul.dtsi b/arch/arm/dts/imx6ull-dart-6ul.dtsi
index fed40b0109..805a382da9 100644
--- a/arch/arm/dts/imx6ull-dart-6ul.dtsi
+++ b/arch/arm/dts/imx6ull-dart-6ul.dtsi
@@ -56,6 +56,10 @@
};
};
+&gpio1 {
+ u-boot,dm-pre-reloc;
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -100,8 +104,10 @@
scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
status = "okay";
+ u-boot,dm-pre-reloc;
eeprom_som: eeprom at 50 {
+ u-boot,dm-pre-reloc;
compatible = "atmel,24c04";
reg = <0x50>;
status = "okay";
@@ -210,6 +216,7 @@
};
pinctrl_i2c2: i2cgrp {
+ u-boot,dm-pre-reloc;
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
@@ -217,6 +224,7 @@
};
pinctrl_i2c2_gpio: i2c2grp_gpio {
+ u-boot,dm-pre-reloc;
fsl,pins = <
MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
diff --git a/board/variscite/dart_6ul/dart_6ul.c b/board/variscite/dart_6ul/dart_6ul.c
index d8e383d323..360be758bb 100644
--- a/board/variscite/dart_6ul/dart_6ul.c
+++ b/board/variscite/dart_6ul/dart_6ul.c
@@ -12,8 +12,11 @@
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/mxc_i2c.h>
+#include <dm.h>
#include <fsl_esdhc_imx.h>
+#include <i2c_eeprom.h>
#include <linux/bitops.h>
+#include <malloc.h>
#include <miiphy.h>
#include <netdev.h>
#include <usb.h>
@@ -222,9 +225,108 @@ int board_init(void)
return 0;
}
+/* length of strings stored in the eeprom */
+#define DART6UL_PN_LEN 16
+#define DART6UL_ASSY_LEN 16
+#define DART6UL_DATE_LEN 12
+
+/* eeprom content, 512 bytes */
+struct dart6ul_info {
+ u32 magic;
+ u8 partnumber[DART6UL_PN_LEN];
+ u8 assy[DART6UL_ASSY_LEN];
+ u8 date[DART6UL_DATE_LEN];
+ u32 custom_addr_val[32];
+ struct cmd {
+ u8 addr;
+ u8 index;
+ } custom_cmd[150];
+ u8 res[33];
+ u8 som_info;
+ u8 ddr_size;
+ u8 crc;
+} __attribute__ ((__packed__));
+
+#define DART6UL_INFO_STORAGE_GET(n) ((n) & 0x3)
+#define DART6UL_INFO_WIFI_GET(n) ((n) >> 2 & 0x1)
+#define DART6UL_INFO_REV_GET(n) ((n) >> 3 & 0x3)
+#define DART6UL_DDRSIZE_IN_MIB(n) ((n) << 8)
+#define DART6UL_INFO_MAGIC 0x32524156
+
+static const char *som_info_storage_to_str(u8 som_info)
+{
+ switch (DART6UL_INFO_STORAGE_GET(som_info)) {
+ case 0x0: return "none (SD only)";
+ case 0x1: return "NAND";
+ case 0x2: return "eMMC";
+ default: return "unknown";
+ }
+}
+
+static const char *som_info_rev_to_str(u8 som_info)
+{
+ switch (DART6UL_INFO_REV_GET(som_info)) {
+ case 0x0: return "2.4G";
+ case 0x1: return "5G";
+ default: return "unknown";
+ }
+}
+
int checkboard(void)
{
- puts("Board: Variscite DART-6UL Evaluation Kit\n");
+ const char *path = "eeprom0";
+ struct dart6ul_info *info;
+ struct udevice *dev;
+ int ret, off;
+
+ off = fdt_path_offset(gd->fdt_blob, path);
+ if (off < 0) {
+ printf("%s: fdt_path_offset() failed: %d\n", __func__, off);
+ return off;
+ }
+
+ ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
+ if (ret) {
+ printf("%s: uclass_get_device_by_of_offset() failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ info = malloc(sizeof(struct dart6ul_info));
+ if (!info)
+ return -ENOMEM;
+
+ ret = i2c_eeprom_read(dev, 0, (uint8_t *)info,
+ sizeof(struct dart6ul_info));
+ if (ret) {
+ printf("%s: i2c_eeprom_read() failed: %d\n", __func__, ret);
+ free(info);
+ return ret;
+ }
+
+ if (info->magic != DART6UL_INFO_MAGIC) {
+ printf("Board: Invalid board info magic: 0x%08x, expected 0x%08x\n",
+ info->magic, DART6UL_INFO_MAGIC);
+ /* do not fail if the content is invalid */
+ free(info);
+ return 0;
+ }
+
+ /* make sure strings are null terminated */
+ info->partnumber[DART6UL_PN_LEN - 1] = '\0';
+ info->assy[DART6UL_ASSY_LEN - 1] = '\0';
+ info->date[DART6UL_DATE_LEN - 1] = '\0';
+
+ printf("Board: PN: %s, Assy: %s, Date: %s\n"
+ " Storage: %s, Wifi: %s, DDR: %d MiB, Rev: %s\n",
+ info->partnumber,
+ info->assy,
+ info->date,
+ som_info_storage_to_str(info->som_info),
+ DART6UL_INFO_WIFI_GET(info->som_info) ? "yes" : "no",
+ DART6UL_DDRSIZE_IN_MIB(info->ddr_size),
+ som_info_rev_to_str(info->som_info));
+
+ free(info);
return 0;
}
diff --git a/configs/variscite_dart6ul_defconfig b/configs/variscite_dart6ul_defconfig
index 5f94cea5dd..721882567d 100644
--- a/configs/variscite_dart6ul_defconfig
+++ b/configs/variscite_dart6ul_defconfig
@@ -36,6 +36,8 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_DM_I2C_GPIO=y
CONFIG_SYS_I2C_MXC=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
CONFIG_PHYLIB=y
--
2.25.1
More information about the U-Boot
mailing list