[PATCH v2 7/8] spl: fit: Replace #ifdef blocks with more readable constructs
Alexandru Gagniuc
mr.nuke.me at gmail.com
Wed Dec 23 00:54:48 CET 2020
Use the IS_ENABLED() macro to control code flow, instead of the
caveman approach of sprinkling #ifdefs. Code size is not affected, as
the linker garbage-collects unused functions. However, readability is
improved significantly.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
common/spl/spl_fit.c | 53 ++++++++++++++++++++------------------------
1 file changed, 24 insertions(+), 29 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index c3da5b1443..35d7d8ec40 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -302,18 +302,16 @@ static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
src = (void *)data;
}
-#ifdef CONFIG_SPL_FIT_SIGNATURE
- printf("## Checking hash(es) for Image %s ... ",
- fit_get_name(fit, node, NULL));
- if (!fit_image_verify_with_data(fit, node,
- src, length))
- return -EPERM;
- puts("OK\n");
-#endif
+ if (CONFIG_IS_ENABLED(FIT_SIGNATURE)) {
+ printf("## Checking hash(es) for Image %s ... ",
+ fit_get_name(fit, node, NULL));
+ if (!fit_image_verify_with_data(fit, node, src, length))
+ return -EPERM;
+ puts("OK\n");
+ }
-#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
- board_fit_image_post_process(&src, &length);
-#endif
+ if (CONFIG_IS_ENABLED(FIT_IMAGE_POST_PROCESS))
+ board_fit_image_post_process(&src, &length);
if (IS_ENABLED(CONFIG_SPL_GZIP) && image_comp == IH_COMP_GZIP) {
size = length;
@@ -378,7 +376,9 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
/* Make the load-address of the FDT available for the SPL framework */
spl_image->fdt_addr = (void *)image_info.load_addr;
-#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
+ if (CONFIG_IS_ENABLED(FIT_IMAGE_TINY))
+ return 0;
+
if (CONFIG_IS_ENABLED(LOAD_FIT_APPLY_OVERLAY)) {
void *tmpbuffer = NULL;
@@ -436,7 +436,6 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image,
ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
if (ret < 0)
return ret;
-#endif
return ret;
}
@@ -445,10 +444,12 @@ static int spl_fit_record_loadable(const struct spl_fit_info *ctx, int index,
void *blob, struct spl_image_info *image)
{
int ret = 0;
-#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
const char *name;
int node;
+ if (CONFIG_IS_ENABLED(FIT_IMAGE_TINY))
+ return 0;
+
ret = spl_fit_get_image_name(ctx, "loadables", index, &name);
if (ret < 0)
return ret;
@@ -459,15 +460,15 @@ static int spl_fit_record_loadable(const struct spl_fit_info *ctx, int index,
image->size, image->entry_point,
fdt_getprop(ctx->fit, node, "type", NULL),
fdt_getprop(ctx->fit, node, "os", NULL));
-#endif
return ret;
}
static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
{
-#if CONFIG_IS_ENABLED(FIT_IMAGE_TINY) && !defined(CONFIG_SPL_OS_BOOT)
- const char *name = fdt_getprop(fit, noffset, FIT_OS_PROP, NULL);
+ if (!CONFIG_IS_ENABLED(FIT_IMAGE_TINY) || CONFIG_IS_ENABLED(OS_BOOT))
+ return fit_image_get_os(fit, noffset, os);
+ const char *name = fdt_getprop(fit, noffset, FIT_OS_PROP, NULL);
if (!name)
return -ENOENT;
@@ -482,9 +483,6 @@ static int spl_fit_image_get_os(const void *fit, int noffset, uint8_t *os)
*os = IH_OS_INVALID;
return 0;
-#else
- return fit_image_get_os(fit, noffset, os);
-#endif
}
/*
@@ -628,10 +626,10 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
*/
if (node < 0)
node = spl_fit_get_image_node(&ctx, FIT_FIRMWARE_PROP, 0);
-#ifdef CONFIG_SPL_OS_BOOT
- if (node < 0)
+
+ if (node < 0 && IS_ENABLED(CONFIG_SPL_OS_BOOT))
node = spl_fit_get_image_node(&ctx, FIT_KERNEL_PROP, 0);
-#endif
+
if (node < 0) {
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(&ctx, "loadables", 0);
@@ -658,10 +656,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
*/
if (!spl_fit_image_get_os(ctx.fit, node, &spl_image->os))
debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
-#if !defined(CONFIG_SPL_OS_BOOT)
- else
+ else if (!IS_ENABLED(CONFIG_SPL_OS_BOOT))
spl_image->os = IH_OS_U_BOOT;
-#endif
/*
* Booting a next-stage U-Boot may require us to append the FDT.
@@ -727,9 +723,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
spl_image->flags |= SPL_FIT_FOUND;
-#ifdef CONFIG_IMX_HAB
- board_spl_fit_post_load(ctx.fit);
-#endif
+ if (IS_ENABLED(CONFIG_IMX_HAB))
+ board_spl_fit_post_load(ctx.fit);
return 0;
}
--
2.26.2
More information about the U-Boot
mailing list