[PATCH v2 5/6] mmc: actions: add MMC driver for Actions OWL S700
Jaehoon Chung
jh80.chung at samsung.com
Wed Dec 23 07:11:51 CET 2020
Hi Amit,
On 12/23/20 2:59 PM, Amit Tomar wrote:
> Hi Jaehoon
>
> I had already mentioned about making more readable than now.
>
>>
>> if (rate <= 1000000) {
>> rdelay = wdelay = OWL_SD_DELAY_LOW_CLK;
>> } else if ( ...) {
>> rdelay = wdelay = OWL_SD_DELAY_MID_CLK;
>> } else if (....) {
>> rdelay = OWL_SD_RDELAY_HIGH;
>> wdelay = OWL_SD_WDELAY_HIGH;
>> }
>>
>> writel(reg | OWL_SD_CTRL_RDELAY(rdelay) | OWL_SD_CTL_WDELAY(wdelay)...);
>>
>> There are many approach to make readable..but Amit mentioned it's using
>> same code in Linux kernel driver.
>>
>> To be honest, this is *not* the reason but if you see controller also
>> supports DDR50 mode(which we may support in future)
>
> where we have different values for read and write delays and we may need
> that many variables to write it cleanly.
>
> But if this is not the problem , I will implement the changes as
> suggested by you.
Frankly, i don't have any objection about your patch. :)
Just curious about other driver what using same code with kernel, not only this driver.
I will follow Peng's opinion.
Best Regards,
Jaehoon Chung
>
>>
>>> Thanks
>>> -Amit
>>>
>>
>>
>
More information about the U-Boot
mailing list