[PATCH] drivers: tee: i2c trampoline driver
Simon Glass
sjg at chromium.org
Tue Dec 29 16:32:17 CET 2020
Hi Jorge,
On Mon, 21 Dec 2020 at 11:15, Jorge Ramirez-Ortiz <jorge at foundries.io> wrote:
>
> This commit gives the secure world access to the I2C bus so it can
> communicate with I2C slaves (tipically those would be secure elements
> like the NXP SE050).
>
Since this code is ported from linux it might be worth adding a link
to the linux commit or patch.
> Tested on imx8mmevk.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge at foundries.io>
> ---
> drivers/tee/optee/Makefile | 1 +
> drivers/tee/optee/i2c.c | 88 ++++++++++++++++++++++++
> drivers/tee/optee/optee_msg.h | 22 ++++++
> drivers/tee/optee/optee_msg_supplicant.h | 5 ++
> drivers/tee/optee/optee_private.h | 12 ++++
> drivers/tee/optee/supplicant.c | 3 +
> 6 files changed, 131 insertions(+)
> create mode 100644 drivers/tee/optee/i2c.c
>
> diff --git a/drivers/tee/optee/Makefile b/drivers/tee/optee/Makefile
> index 928d3f8002..068c6e7aa1 100644
> --- a/drivers/tee/optee/Makefile
> +++ b/drivers/tee/optee/Makefile
> @@ -2,4 +2,5 @@
>
> obj-y += core.o
> obj-y += supplicant.o
> +obj-$(CONFIG_DM_I2C) += i2c.o
> obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
> diff --git a/drivers/tee/optee/i2c.c b/drivers/tee/optee/i2c.c
> new file mode 100644
> index 0000000000..2ebbf1ff7c
> --- /dev/null
> +++ b/drivers/tee/optee/i2c.c
> @@ -0,0 +1,88 @@
> +// SPDX-License-Identifier: BSD-2-Clause
> +/*
> + * Copyright (c) 2020 Foundries.io Ltd
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <i2c.h>
> +#include <tee.h>
> +#include "optee_msg.h"
> +#include "optee_private.h"
> +
> +static struct {
comments on members, but see below
> + struct udevice *dev;
> + int chip;
> + int bus;
> +} xfer;
How come this is not a local variable? Is it an optimisation? Does it
make any difference in execution time? If so I think it would be
better to drop it as state should be kept in driver rmodel. If you
really want it, then perhaps just keep the dev, since you can use:
dev_seq(dev_get_parent(dev) - to get the bus number the device is on
struct dm_i2c_chip *chip = dev_get_parent_platdata(dev);
then use chip->chip_addr to get the chip address
then store 'dev' in priv data in your dev (I think this is struct
optee_private), the one passed to the function below:
> +
> +void optee_suppl_cmd_i2c_transfer(struct udevice *dev,
> + struct optee_msg_arg *arg)
> +{
> + const uint64_t attr[] = {
> + OPTEE_MSG_ATTR_TYPE_VALUE_INPUT,
> + OPTEE_MSG_ATTR_TYPE_VALUE_INPUT,
> + OPTEE_MSG_ATTR_TYPE_RMEM_INOUT,
> + OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT,
> + };
> + struct udevice *chip_dev = NULL;
> + struct tee_shm *shm = NULL;
> + uint8_t *buf = NULL;
Shouldn't init vars that don't need to be
> + size_t len = 0;
> + int chip = -1;
> + int bus = -1;
> + int ret = -1;
> +
> + if (arg->num_params != ARRAY_SIZE(attr) ||
> + arg->params[0].attr != attr[0] ||
> + arg->params[1].attr != attr[1] ||
> + arg->params[2].attr != attr[2] ||
> + arg->params[3].attr != attr[3]) {
> + arg->ret = TEE_ERROR_BAD_PARAMETERS;
> + return;
> + }
> +
> + len = arg->params[2].u.tmem.size;
> + shm = (struct tee_shm *)(unsigned long)arg->params[2].u.tmem.shm_ref;
> + buf = shm->addr;
> + if (!buf || !len)
> + goto bad;
> +
> + bus = (int)arg->params[0].u.value.b;
> + chip = (int)arg->params[0].u.value.c;
> +
> + if (!xfer.dev || xfer.chip != chip || xfer.bus != bus) {
> + if (i2c_get_chip_for_busnum(bus, chip, 0, &chip_dev))
> + goto bad;
> +
> + xfer.dev = chip_dev;
> + xfer.chip = chip;
> + xfer.bus = bus;
> + }
> +
> + if (arg->params[1].u.value.a & OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT)
> + if (i2c_set_chip_flags(xfer.dev, DM_I2C_CHIP_10BIT))
> + goto bad;
Is this flag defined in the devicetree? If so we could read it in
i2c_chip_ofdata_to_platdata() (which will be i2c_chip_of_to_plat()
when the next merge window opens - see upstream/next).
It just seems odd that optee is controlling this, since presumably
U-Boot knows about it?
> +
> + switch (arg->params[0].u.value.a) {
> + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD:
> + ret = dm_i2c_read(xfer.dev, 0, buf, len);
> + break;
> + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR:
> + ret = dm_i2c_write(xfer.dev, 0, buf, len);
This code should run on sandbox and you can use a suitable i2c
emulator (UCLASS_I2C_EMUL), only three at present) or write a new one.
Then your test can arrange for sandbox to send an RPC (e.g. by calling
a function directly in that driver to tell it to do that next time it
has a chance), and your test can check that the i2c read/write
happened.
> + break;
> + default:
> + goto bad;
> + }
> +
> + if (ret) {
> + arg->ret = TEE_ERROR_COMMUNICATION;
> + } else {
> + arg->params[3].u.value.a = len;
> + arg->ret = TEE_SUCCESS;
> + }
> +
> + return;
> +bad:
> + arg->ret = TEE_ERROR_BAD_PARAMETERS;
> +}
> diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
> index 24c60960fc..7cedb59a82 100644
> --- a/drivers/tee/optee/optee_msg.h
> +++ b/drivers/tee/optee/optee_msg.h
> @@ -422,4 +422,26 @@ struct optee_msg_arg {
> */
> #define OPTEE_MSG_RPC_CMD_SHM_FREE 7
>
> +/*
> + * Access a device on an i2c bus
> + *
> + * [in] param[0].u.value.a mode: RD(0), WR(1)
> + * [in] param[0].u.value.b i2c adapter
> + * [in] param[0].u.value.c i2c chip
> + *
> + * [in] param[1].u.value.a i2c control flags
> + * [in] param[1].u.value.b i2c retry (optional)
> + *
> + * [in/out] memref[2] buffer to exchange the transfer data
> + * with the secure world
> + *
> + * [out] param[3].u.value.a bytes transferred by the driver
> + */
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
> +/* I2C master transfer modes */
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_RD 0
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER_WR 1
> +/* I2C master control flags */
> +#define OPTEE_MSG_RPC_CMD_I2C_FLAGS_TEN_BIT BIT(0)
Jens, perhaps OPTEE_MSG_RPC_CMD_ could be renamed to OPTEE_RPC_ as
this is way too long.
> +
> #endif /* _OPTEE_MSG_H */
> diff --git a/drivers/tee/optee/optee_msg_supplicant.h b/drivers/tee/optee/optee_msg_supplicant.h
> index a0fb8063c8..963cfd4782 100644
> --- a/drivers/tee/optee/optee_msg_supplicant.h
> +++ b/drivers/tee/optee/optee_msg_supplicant.h
> @@ -147,6 +147,11 @@
> #define OPTEE_MSG_RPC_CMD_SHM_ALLOC 6
> #define OPTEE_MSG_RPC_CMD_SHM_FREE 7
>
> +/*
> + * I2C bus access
> + */
> +#define OPTEE_MSG_RPC_CMD_I2C_TRANSFER 21
> +
> /*
> * Was OPTEE_MSG_RPC_CMD_SQL_FS, which isn't supported any longer
> */
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index 9442d1c176..d7ab1f593f 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -60,6 +60,18 @@ static inline void optee_suppl_rpmb_release(struct udevice *dev)
> }
> #endif
>
> +#ifdef CONFIG_DM_I2C
We can probably assume DM_I2C is used for any recent boards, but I'd
prefer to avoid cluttering up the header file when DM_I2C should be
supported. See below.
> +void optee_suppl_cmd_i2c_transfer(struct udevice *dev,
> + struct optee_msg_arg *arg);
Function comment please
> +#else
Yuk, please don't do this..
> +void optee_suppl_cmd_i2c_transfer(struct udevice *dev,
> + struct optee_msg_arg *arg)
> +{
> + debug("OPTEE_MSG_RPC_CMD_I2C_TRANSFER not implemented\n");
> + arg->ret = TEE_ERROR_NOT_IMPLEMENTED;
> +}
> +#endif
> +
> void *optee_alloc_and_init_page_list(void *buf, ulong len, u64 *phys_buf_ptr);
>
> #endif /* __OPTEE_PRIVATE_H */
> diff --git a/drivers/tee/optee/supplicant.c b/drivers/tee/optee/supplicant.c
> index ae042b9a20..f7738983cd 100644
> --- a/drivers/tee/optee/supplicant.c
> +++ b/drivers/tee/optee/supplicant.c
> @@ -89,6 +89,9 @@ void optee_suppl_cmd(struct udevice *dev, struct tee_shm *shm_arg,
It seems a comment in the header file was missed. Can you please add
it while you are here?
> case OPTEE_MSG_RPC_CMD_RPMB:
> optee_suppl_cmd_rpmb(dev, arg);
> break;
> + case OPTEE_MSG_RPC_CMD_I2C_TRANSFER:
if (IS_ENABLED(DM_I2C))
> + optee_suppl_cmd_i2c_transfer(dev, arg);
or if permitted, make TEE depend on DM_I2C
> + break;
> default:
> arg->ret = TEE_ERROR_NOT_IMPLEMENTED;
> }
> --
> 2.17.1
>
Regards,
Simon
More information about the U-Boot
mailing list